Accessories

Lightweight Goshawk u8 Marketing Model - Non-working terminal for use at events and shows. 

A DC power cable that can be connected to the AC-to-DC power kit (U8ACC-00002-0) or AC-to-DC power kit (U8ACC-00044-0). It overrides the remote power trigger (ACC) function.

Kymeta U8ACC-00070-0 CABLE, POWER OSPREY U8

Kymeta U8ACC-00069-0 CABLE, OSPREY ETHERNET, 25 FT

An extension LMR cable with a male N type connector for the BUC and a female N type connector outside of the Hawk u8 ODU shroud. Connect this short cable to a longer coaxial cable connected to the TX port of your modem.

An LMR-195 cable that connects the BUC to the communications module’s TX out port. The cable has standard N-type connectors at each end.

An LMR-195 cable that connects the LNB to the antenna RX IN port. The cable requires a right-angle N-type connector at the antenna end to maintain the low profile of the antenna without sharp or protruding cable bends. The cable has standard N-type...

A cable that connects the communication module and BUC. This cable provides power to the BUC and communication to set attenuation, mute, and read output power.

A shielded Ethernet cable that provides power and control to the fan panel. This cable cannot be replaced with a standard Ethernet cable. Disconnect this cable at the connection halfway between the communication module and fan panel before removing the...

An outdoor rated RJ 45 Ethernet jumper cable with a male connection on one end and a female connection on the other. Refer to Kymeta u8 cable replacement instructions (700-00144-000) for more information.

Use this kit to replace a shroud panel cover on any Osprey. Compatibility: Osprey u8 - all configurations What's in the kit: shroud panel cover assembly installation hardware installation tools

Use this kit to replace a shroud access panel on any Hawk u8 or Goshawk u8. Compatibility: Hawk u8 ODU / GEO / GEO-LTE Goshawk u8 What's in the kit: shroud access panel assembly installation hardware installation tools