Teledyne QMultiFlex-400 IP Modulator/Multi-Demodulator Satellite Modem

Overview

The QMultiFlex-400™ hub offers an affordable solution for point-to-multipoint satellite IP
communications. The Hub supports a highlyefficient DVB-S2/X shared outbound along with up to 16 DVB-S2/X returns.
In addition, the QMultiFlex-400 unit supports an embedded Hub Canceller utilising the powerful DVB-S2 and DVB-S2X waveforms, allowing satellite carriers in a point-to-multipoint system to operate in the same satellite bandwidth, providing satellite BW savings of up to 50%.
The QMultiFlex-400 hub system may be expanded to support a maximum of 128 remote sites. This is achieved by cascading Multi-demodulators at the hub, where each Multi-demod supports an additional 16 SCPC receive carriers into the hub.
All network modems (and other equipment) can be monitored and controlled via Q-NET™ Navigator (included as standard).

Market and Applications

• Military and Government secure networks
• Maritime, oil & gas communications
• Comms-on-the-move (COTM) networks
• IP trunking/backhaul & cellular backhaul
• Corporate/enterprise networking
• Government universal service obligation networks
• Broadcast

Features 

• Star, Mesh & hybrid point-to-multipoint IP
• Modulator with up to 16 demodulators
• Embedded Hub Canceller
• DVB-S2/X Outbound and Inbounds
• Data rates to 345Mbps outbound & 338Mbps composite inbound across all enabled demodulators.
• XStream IP™ advanced IP optimization suite including, TCP acceleration, traffic shaping & VCM/ACM
• Q-NET™ Navigator network control app
• Virtual Network Operator (VNO) support
• Layer 2 (including VLAN) & Layer 3 support
• Optimized spectral roll-offs, down to 5%
• Built-in spectrum and constellation monitors
• Supports low-cost Q-Lite, QFlex, QFlex-400 &
QFlex-400 P2MP remote modems
• Optional redundancy protection
• Software Defined Network support: vendorindependent network device control using standard commands (supports OpenFlow

Why QMultiFlex-400?
Historically, networks required separate boxes for modulators, demodulators, IP optimisers, Ethernet switches, routers, packet encapsulators, spectrum analysers, oscilloscopes, redundancy controllers.

The QMultiFlex-400 replaces all of these, at a significant cost savings even before considering the cost of spares, training and maintenance for all those individual boxes. And these savings can be multiplied as you scale your network.