Zoom the image with the mouse
Teledyne
QFlex-400 P2MP Dual IF/L-Band Satellite Modem
Condition:
New
Availability:
YES
Weight:
3.00 KGS
Width:
48.26
(cm)
Height:
4.50
(cm)
Depth:
48.26
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Overview
The QFlex-400™ P2MP modem is pre-configured to provide only the features required for use as a remote modem in a Q-NET™ point-to-multipoint IP system utilising a QMultiFlex-400™ hub. This makes it easy to purchase exactly what you need. The modem is fitted with the standard QFlex-400
modem software and so can also operate point-to-point. Additional features for point-to-point operation, as per the QFlex-400 datasheet, can be purchased if required.
The QFlex-400 P2MP modem supports the most powerful bandwidth-saving technology available. There is a choice of DVB-S2X or FastLink™ low- latency LDPC for both the outbound and inbound carriers. DVB-S2X, is 20% to 60% more bandwidth efficient than its predecessor, DVB-S2.
Bandwidth-saving IP features include variable coding and modulation (VCM), adaptive coding and modulation (ACM) and TCP acceleration. Data for the remote modem can be filtered from the shared outbound using Virtual LAN ID, stream ID, IP address, DSCP, etc.
Markets and Applications
• Military and Government secure networks
• Maritime, oil & gas communications
• Comms-on-the-move (COTM) networks
• IP trunking/backhaul & cellular backhaul
• Corporate/enterprise networking
• Government universal service obligation networks
• Broadcast
Features
• Dual IF/L-band operation
• Rx data rates to 345Mbps; Tx to 100Mbps
• Point-to-point & point-to-multipoint operation
• XStream IP™ advanced IP optimization suite,
including TCP Acceleration, header & payload
compression, dynamic routing, traffic shaping, jitter reduction & ACM
• Choise of DVB-S2/S2X or FastLink™ LDPC outbounds/inbounds
• Optimized spectral roll-offs, including 5%
• LinkGuard™ signal-under-carrier interference detection
• Built-in spectrum & constellation monitors
• DVB Carrier ID (to DVB-CID standard)
• Q-NET™ Navigator network control app
• Software Defined Network support: vendor-independent network device control using standard commands (supports OpenFlow)
Why QFlex-400 P2MP?
Our Flagship Software Defined Modem is Paradise Datacom’s most innovative and flexible Satellite Modem
to date.
5 customers are viewing this product
Details
Overview
The QFlex-400™ P2MP modem is pre-configured to provide only the features required for use as a remote modem in a Q-NET™ point-to-multipoint IP system utilising a QMultiFlex-400™ hub. This makes it easy to purchase exactly what you need. The modem is fitted with the standard QFlex-400
modem software and so can also operate point-to-point. Additional features for point-to-point operation, as per the QFlex-400 datasheet, can be purchased if required.
The QFlex-400 P2MP modem supports the most powerful bandwidth-saving technology available. There is a choice of DVB-S2X or FastLink™ low- latency LDPC for both the outbound and inbound carriers. DVB-S2X, is 20% to 60% more bandwidth efficient than its predecessor, DVB-S2.
Bandwidth-saving IP features include variable coding and modulation (VCM), adaptive coding and modulation (ACM) and TCP acceleration. Data for the remote modem can be filtered from the shared outbound using Virtual LAN ID, stream ID, IP address, DSCP, etc.
Markets and Applications
• Military and Government secure networks
• Maritime, oil & gas communications
• Comms-on-the-move (COTM) networks
• IP trunking/backhaul & cellular backhaul
• Corporate/enterprise networking
• Government universal service obligation networks
• Broadcast
Features
• Dual IF/L-band operation
• Rx data rates to 345Mbps; Tx to 100Mbps
• Point-to-point & point-to-multipoint operation
• XStream IP™ advanced IP optimization suite,
including TCP Acceleration, header & payload
compression, dynamic routing, traffic shaping, jitter reduction & ACM
• Choise of DVB-S2/S2X or FastLink™ LDPC outbounds/inbounds
• Optimized spectral roll-offs, including 5%
• LinkGuard™ signal-under-carrier interference detection
• Built-in spectrum & constellation monitors
• DVB Carrier ID (to DVB-CID standard)
• Q-NET™ Navigator network control app
• Software Defined Network support: vendor-independent network device control using standard commands (supports OpenFlow)
Why QFlex-400 P2MP?
Our Flagship Software Defined Modem is Paradise Datacom’s most innovative and flexible Satellite Modem
to date.
Related Products
