Zoom the image with the mouse
Avcom
Avcom EVO-RBR-2290A1S Rackmount L-Band Beacon Receiver
Product Code:
EVO-RBR-2290A1S
Condition:
New
Weight:
2.20 KGS
Width:
48.26
(cm)
Height:
4.37
(cm)
Depth:
46.04
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Avcom EVO-RBR-2290A1S Rackmount L-Band Beacon Receiver
The EVO-RBR-2290A1S beacon receiver based on Avcom’s software-defined-radio technology platform designed to exceed today’s performance challenges. The receiver is intended for antenna systems applications required to operate under challenging conditions. Avcom’s newest beacon receiver technology provides excellent performance by employing high-performance DSP, and FPGAs. Integrators can now install a full-function beacon receiver into systems operating in austere and rugged environments as well as standard teleport and earth station indoor environments. Communication with the receiver is achieved via ethernet and Avcom’s Graphical User Interface, the EVO GUI software. It provides a feature-rich set of functions to lock on and provide a DC output voltage proportionate to the received satellite beacon signal. The system can also be accessed via a customer implemented POSIX-Compliant API. Source code is available from Avcom.
Rackmount L-Band Beacon Receiver
- Track L-Band CW Beacon Carrier; BPSK Carrier
- CEPT-Carrier-Edge-Power-Track for DVB Carrier
- Monitoring & Control (M&C) via Ethernet
- Integrates with Avcom’s EVO-GUI
- Comprehensive API protocol support for Easy Integration
- Extended Temperature Range
| PARAMETER | PERFORMANCE |
| RF | |
| INPUT CONNECTOR: | SMA, 50 Ohm |
| INPUT FREQUENCY RANGE: | 900-2200 MHz |
| TUNING STEP SIZE: | 1kHz |
| INPUT LEVEL RANGE: | -10 to -100 dBm |
| MAXIMUM INPUT POWER LEVEL: | – 10 dBm max |
| DETECTION BANDWIDTH: | 10 to 750 kHz |
| TRACKING BANDWIDTH: | 10 to 150 kHz |
| DETECTED BEACON LEVEL FILTERING: | Low-Pass, User-Select: 0.25 Hz, 0.5 Hz,
1.0 Hz, 2.0 Hz, 3.0 Hz |
| SEARCH/TRACK RATE: | User-Selectable: 10 Hz, 25Hz |
| ACQUISITION TIME: | <1 second typical |
| ADJUSTABLE DELAY BEFORE LOCK: | 0 to 5000 milliseconds |
| ACQUISITION/TRACKING LEVEL: | Minimum C/No, 39 dB-Hz |
| BEACON/CARRIER TYPE: | CW, BPSK (No Demod)
CEPT(Carrier-Edge-Power-Track) on DVB (No Demod) |
| M & C | |
| ETHERNET: | 10/100; RJ-45, USB |
| IP ADDRESS: | DHCP or Static |
| INCLUDED CONTROL APPLICATION: | Avcom EVO-GUI (Windows) |
|
APPLICATION PROGRAMMING INTERFACE (API): |
POSIX-compliant ‘C’ APPLICATION PROGRAMMING INTERFACE (API):
Pre-built Libraries for Windows and Linux x86 Source code available |
| PROTOCOL: | High-reliability closed-loop with error checking |
| RECEIVER OUTPUT VIA PHYSICAL OUTPUTS: | Yes |
| RECEIVER OUTPUT VIA M&C INTERFACE: | Yes |
| RECEIVER OUTPUTS | |
| CONNECTOR: | BNC and 9-pin D-sub |
| ANALOG SIGNAL STRENGTH INDICATOR OUTPUT: | 0 to 10 VDC, 25 mA |
| ANALOG SLOPE: | 0.1 to 3.0 Volts/dB |
| ANALOG SLOPE POLARITY: | Positive or Negative |
| ANALOG OUTPUT FILTERING: | Low-Pass, 0.5 Hz, fixed |
| DIGITAL LOCK INDICATOR OUTPUT: | 0 – 3.3 VDC |
| DIGITAL LOCK INDICATOR OUTPUT POLARITY: | Adjustable (H=LOCK or L=LOCK) |
| POWER | |
| CONNECTOR: | 2-pin Circular Threaded |
| POWER SUPPLY: | 15 – 24 VDC; < 3 W |
| PHYSICAL | |
| DIMENSIONS: | 19” (16.75”) x 18.125” (17.00) x 1.720” |
| WEIGHT: | 2.2 kg |
| ENVIRONMENTAL | |
| OPERATING TEMPERATURE: | -40°C to 70°C |
| STORAGE TEMPERATURE: | -40°C to 85°C |
| HUMIDITY: | 0 to 95%, non-condensing |
| OPERATING ALTITUDE: | 40,000 ft; 12,000 m |
5 customers are viewing this product
Details
Avcom EVO-RBR-2290A1S Rackmount L-Band Beacon Receiver
The EVO-RBR-2290A1S beacon receiver based on Avcom’s software-defined-radio technology platform designed to exceed today’s performance challenges. The receiver is intended for antenna systems applications required to operate under challenging conditions. Avcom’s newest beacon receiver technology provides excellent performance by employing high-performance DSP, and FPGAs. Integrators can now install a full-function beacon receiver into systems operating in austere and rugged environments as well as standard teleport and earth station indoor environments. Communication with the receiver is achieved via ethernet and Avcom’s Graphical User Interface, the EVO GUI software. It provides a feature-rich set of functions to lock on and provide a DC output voltage proportionate to the received satellite beacon signal. The system can also be accessed via a customer implemented POSIX-Compliant API. Source code is available from Avcom.
Rackmount L-Band Beacon Receiver
- Track L-Band CW Beacon Carrier; BPSK Carrier
- CEPT-Carrier-Edge-Power-Track for DVB Carrier
- Monitoring & Control (M&C) via Ethernet
- Integrates with Avcom’s EVO-GUI
- Comprehensive API protocol support for Easy Integration
- Extended Temperature Range
| PARAMETER | PERFORMANCE |
| RF | |
| INPUT CONNECTOR: | SMA, 50 Ohm |
| INPUT FREQUENCY RANGE: | 900-2200 MHz |
| TUNING STEP SIZE: | 1kHz |
| INPUT LEVEL RANGE: | -10 to -100 dBm |
| MAXIMUM INPUT POWER LEVEL: | – 10 dBm max |
| DETECTION BANDWIDTH: | 10 to 750 kHz |
| TRACKING BANDWIDTH: | 10 to 150 kHz |
| DETECTED BEACON LEVEL FILTERING: | Low-Pass, User-Select: 0.25 Hz, 0.5 Hz,
1.0 Hz, 2.0 Hz, 3.0 Hz |
| SEARCH/TRACK RATE: | User-Selectable: 10 Hz, 25Hz |
| ACQUISITION TIME: | <1 second typical |
| ADJUSTABLE DELAY BEFORE LOCK: | 0 to 5000 milliseconds |
| ACQUISITION/TRACKING LEVEL: | Minimum C/No, 39 dB-Hz |
| BEACON/CARRIER TYPE: | CW, BPSK (No Demod)
CEPT(Carrier-Edge-Power-Track) on DVB (No Demod) |
| M & C | |
| ETHERNET: | 10/100; RJ-45, USB |
| IP ADDRESS: | DHCP or Static |
| INCLUDED CONTROL APPLICATION: | Avcom EVO-GUI (Windows) |
|
APPLICATION PROGRAMMING INTERFACE (API): |
POSIX-compliant ‘C’ APPLICATION PROGRAMMING INTERFACE (API):
Pre-built Libraries for Windows and Linux x86 Source code available |
| PROTOCOL: | High-reliability closed-loop with error checking |
| RECEIVER OUTPUT VIA PHYSICAL OUTPUTS: | Yes |
| RECEIVER OUTPUT VIA M&C INTERFACE: | Yes |
| RECEIVER OUTPUTS | |
| CONNECTOR: | BNC and 9-pin D-sub |
| ANALOG SIGNAL STRENGTH INDICATOR OUTPUT: | 0 to 10 VDC, 25 mA |
| ANALOG SLOPE: | 0.1 to 3.0 Volts/dB |
| ANALOG SLOPE POLARITY: | Positive or Negative |
| ANALOG OUTPUT FILTERING: | Low-Pass, 0.5 Hz, fixed |
| DIGITAL LOCK INDICATOR OUTPUT: | 0 – 3.3 VDC |
| DIGITAL LOCK INDICATOR OUTPUT POLARITY: | Adjustable (H=LOCK or L=LOCK) |
| POWER | |
| CONNECTOR: | 2-pin Circular Threaded |
| POWER SUPPLY: | 15 – 24 VDC; < 3 W |
| PHYSICAL | |
| DIMENSIONS: | 19” (16.75”) x 18.125” (17.00) x 1.720” |
| WEIGHT: | 2.2 kg |
| ENVIRONMENTAL | |
| OPERATING TEMPERATURE: | -40°C to 70°C |
| STORAGE TEMPERATURE: | -40°C to 85°C |
| HUMIDITY: | 0 to 95%, non-condensing |
| OPERATING ALTITUDE: | 40,000 ft; 12,000 m |
Related Products
