Antennas

Description TriMast Mount for 75cm - 1.0M (2.38" OD - 60mm) Antennas which can be used to mount an antenna to a floor, wall or roof.   ESTIMATED ARO LEADTIME 2 - 3 WEEKS Skyware Global’s TRIMAST Mount has been specifically designed for our 75...

Description Non-Penetrating Roof Mount for Antennas up to 2.4m.   The Baird VL-4 (1 Tray); (2 Tray); (3 Tray) non-penetrating mount is designed with a dropped leg to mount satellite antennas at low elevation angles.  The VL-4 is used...

Description King Post Pedestal Mount for 1.2m - 2.4m Antennas.  

Description The Antenna Anti-icing Systems are designed to keep the reflector and feed horn free from ice and snow during most inclement weather conditions. An automated sensor will energize the reflector and feed horn heaters, when temperatures fall...

Description Non-Penetrating Roof Mount for use with the 46cm through 90cm Az/El antenna system. The Skyware Global small non-penetrating roof mount has been specifically designed for our line of small VSAT antennas. Mechanically...

Description The APS700 Series Controller based on a Industrial PLC is used to control satellite antenna positioning. It is available with or without 7” Touchscreen, CAN Bus Communication Interface, Ethernet interface for remote control (WebGui,...

Description This is a 98cm precision composite reflector suitable for Ka band receiving and transmitting. Features: Fine azimuth and elevation adjustment features ISO 9001:2008 Certificate of Registration Meets or exceeds regulatory agency requirements ...

Description This is a 96cm one-piece precision composite reflector suitable for Ku band receiving and transmitting. Features: Fine azimuth and elevation adjustment features ISO 9001:2008 Certificate of Registration Meets or exceeds regulatory agency...

Description The 84cm Rx/Tx Ku Band Elliptical Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of the reflector is a...

Description This is a 90cm reflector suitable for Ka and Ku band receiving and transmitting. Features: Fine azimuth and elevation adjustment features ISO 9001:2008 Certificate of Registration Available 4’ x 4’ Non Pen Mount Meets or exceeds...

Description The 75cm Rx/Tx Ku Band Elliptical Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of the reflector is a...