Terrasat IBUC R C Band 400W

IBUC R C-Band Intelligent Block Upconverter

The Terrasat C-Band IBUC R Series has all of the advanced IBUC features and the upgraded RJ45 M&C connector. This block upconverter offers significant benefits including low terminal cost, simple design and installation, superior RF performance and a reliable 1+1 configuration.  Available in a wide range of RF power outputs including 80W, 100W, 125W, 150W, 175 and 200 watts. 

The C-band IBUC R Series also provides new interfaces for connecting you to extensive M&C facilities for network management or local access. This powerful M&C enables trouble‐free commissioning with easy, point‐and‐click installation/configuration, continuous verification of performance with time‐stamped alarm history and simplified monitoring of terminal status

IBUC-R comes with a complete set of diagnostic tools including:

 10 MHz input detector
 Input voltage and current monitoring
 Transmit L‐band input level detector
 Transmit RF output level detector
 User configurable thresholds and alarms

Unique to the IBUC are internal AGC and ALC functions that satisfy demanding applications with stringent specifications.

Frequency Range RF (MHz) IF (MHz)
Sense Inverting Non-Inverting
Band 1 std C 5850 to 6425 950 to 1525 950 to 1525
Band 2 Palapa 6425 to 6725 975 to 1275 1125 to 1425
Band 3 INSAT 6725 to 7025 1150 to 1450 965 to 1265
Band 4 EXT C 5850 to 6650 950 to 1750 950 to 1750
Band 5 Full C 5850 to 6725 975 to 1850 950 to 1825
Input
VSWR/Impedance 1.5:1 max/ 50 Ohm
Input Connector Type N Female (50 Ohm)
Input Connector Options Type F (75 Ohm), TNC (50 Ohm)
Input Power Detector Range -55 to -20 dBm (80W - 200W)
-50 to -15 dBm (400W)
Gain
Small Signal Gain (L-band to RF) with Attenuator Set to 0 dB
100W 81 dB min
125W 82 dB min
150W 83 dB min
175W 83 dB min
200W 84 dB min
400W 82 dB min
Attenuator Range 30 dB Variable in 0.1 dB Steps
Gain Flatness
Full Band 4 dB p-p max
36 MHz 1.5 dB p-p max
1 MHz 0.25 dB p-p max
Gain Variation Over Temperature Bands 1/2/3 Bands 4/5
Open Loop 3 dB p-p max 4 dB p-p max
With AGC 1 dB p-p max 1 dB p-p max
RF Output
Interface CPR-137G
VSWR 1.3:1 max
Rated Output Power P1dB
100W +50 dBm min
125W +51 dBm min
150W +51.8 dBm min
175W +52.4 dBm min
200W +53 dBm min
400W +56 dBm min
Note: Output Power in Bands 4 & 5 is reduced by 0.5 dB.
IMD3 (2 Carriers, 3 dB TOBO) -26 dBc max (80W-200W)
-25 dBc max (400W)
Level Stability with ALC ± 0.5 dB
Output Power Detector Range Rated Power to -20 dB
Power Reading Accuracy ± 1.0 dB max
Spurious
In Band -70 dBc
Out Band Complies with EN 301 443 & MIL-STD 188-164B.
Harmonics -50 dBc max.
Output Noise Power Density TX <- 74 dBm/Hz
RX <- 145 dBm/Hz

SSB Phase Noise External Reference IBUC
R
10 Hz -115 dBC/Hz -54 dBc/Hz
100 Hz -140 dBc/Hz -79 dBc/Hz
1 KHz -150 dBc/Hz -89 dBc/Hz
10 KHz -155 dBc/Hz -94 dBc/Hz
100 KHz N/A -100 dBc/Hz
1 MHz N/A -110 dBc/Hz
External Reference (Multiplexed on TX IFL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference- Optional
Local Oscillator Frequency
Sense Inverting Non-Inverting
Band 1 7375 MHz 4900 MHz
Band 2 7700 MHz 5300 MHz
Band 3 8175 MHz 5760 MHz
Band 4 7600 MHz 4900 MHz
Band 5 7700 MHz 4900 MHz
IBUC Power Supply
Voltage DC 42 V min, 60 V max
AC 100 to 240 VAC 100W, 125W
200 to 240 VAC 150W to 400W
Power Consumption DC AC
100W 700 W 800 VA
125W 800 W 900 VA
150W 1056 W 1200 VA
175W 1100 W 1250 VA
200W 1150 W 1300 VA
400W N/A 2600 VA
Monitor & Control
Ethernet (HTTP, Telnet, SNMPv2c) via RJ45 Connector
RS232/485, Handheld Terminal via MS-Type Connector,
FSK multiplexed on TX IFL.
Environmental
Operating Temperature -40°C to +55°C
Relative Humidity 100% Condensing
Altitude 10,000 ft (3,000 m) ASL
Mechanical DC Powered AC Powered
100W-200W 16.2 x 10 x 7.4 in.
411 x 254 x 188 mm.
16.2 x 10 x 7.6 in.
411 x 254 x 193 mm
.
32 lbs
14.5 kgs
33 lbs
14.9 kgs
400W N/A 29 x 15 x 10.1 in
737 x 381 x 257 mm.
83 lbs
37.6 kgs
(Dimensions not including isolators for 100W to 200W models)
Specifications subject to change without notice.