Zoom the image with the mouse
Safran
Safran TS1000T High Temperature MEMS Inclinometer
Product Code:
TS1000T
Condition:
New
Weight:
1.00 KGS
Width:
8.90
(cm)
Height:
3.20
(cm)
Depth:
8.90
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
The innovative TS1000T is the best in class MEMS inclinometer specifically designed for high-temperature directional drilling applications. Accelerometer is available in 3 ranges : ± 2 , 5, 10 g.
This sensor offers the highest performance stability with shock resistance, as well as the lowest non-linearity and noise in the MEMS marketplace. The proven MEMS technology by Safran Colibrys is pushing forward the vibration and shock endurance in temperature.
TS1000T accelerometer operates from -40°C to +150°C and up to +175°C by intermittent temperature exposure.
ADVANTAGES
Uniquely Designed For Drilling
The TS1000T and MS1000T high-temperature MEMS accelerometers are specifically designed for inertial directional drilling applications because they can withstand extreme shock and vibration, as well as high temperatures. The TS1000T and MS1000T have a shock survivability of 6000 g and an endurance shock tolerance of 1500 g. Unconventional resource extraction requires sophisticated drilling technologies, and the TS1000T and MS1000T help with complex drilling operations including sidetracking, fault drilling, multiple target zones and applications that entail multiple wells.
Built-In Self-Test Function
The built-in self-test mode generates a square wave signal on the device outputs (OUTP & OUTN) and can be used for device failure detection. This can be helpful to prevent system faults before they occur.
Ensures Safety & Reliability
The high quality sensor design, the MEMS Accelerometer products support test engineers around the world quickly and flexibly, to ensure safety and reliability of vehicles, equipment and buildings.
| Key Parameters | TS1002T | TS1005T | TS1010T | Unit |
| Full-scale acceleration | ±2 | ±5 | ±10 | g |
| Residual Bias modeling error | 0.6 | 1.5 | 3 | mg |
| Long-term Bias repeatability | 2 | 5 | 10 | mg |
| Residual Scale factor modeling error | 300 | 300 | 300 | ppm |
| Noise in band | 7 | 17 | 34 | μg/√Hz |
| Non Linearity (IEEE norm) | 0.3 | 0.3 | 0.3 | % FS |
| Endurance shock (500 times) | 1500 | 1500 | 1500 | g |
5 customers are viewing this product
Details
The innovative TS1000T is the best in class MEMS inclinometer specifically designed for high-temperature directional drilling applications. Accelerometer is available in 3 ranges : ± 2 , 5, 10 g.
This sensor offers the highest performance stability with shock resistance, as well as the lowest non-linearity and noise in the MEMS marketplace. The proven MEMS technology by Safran Colibrys is pushing forward the vibration and shock endurance in temperature.
TS1000T accelerometer operates from -40°C to +150°C and up to +175°C by intermittent temperature exposure.
ADVANTAGES
Uniquely Designed For Drilling
The TS1000T and MS1000T high-temperature MEMS accelerometers are specifically designed for inertial directional drilling applications because they can withstand extreme shock and vibration, as well as high temperatures. The TS1000T and MS1000T have a shock survivability of 6000 g and an endurance shock tolerance of 1500 g. Unconventional resource extraction requires sophisticated drilling technologies, and the TS1000T and MS1000T help with complex drilling operations including sidetracking, fault drilling, multiple target zones and applications that entail multiple wells.
Built-In Self-Test Function
The built-in self-test mode generates a square wave signal on the device outputs (OUTP & OUTN) and can be used for device failure detection. This can be helpful to prevent system faults before they occur.
Ensures Safety & Reliability
The high quality sensor design, the MEMS Accelerometer products support test engineers around the world quickly and flexibly, to ensure safety and reliability of vehicles, equipment and buildings.
| Key Parameters | TS1002T | TS1005T | TS1010T | Unit |
| Full-scale acceleration | ±2 | ±5 | ±10 | g |
| Residual Bias modeling error | 0.6 | 1.5 | 3 | mg |
| Long-term Bias repeatability | 2 | 5 | 10 | mg |
| Residual Scale factor modeling error | 300 | 300 | 300 | ppm |
| Noise in band | 7 | 17 | 34 | μg/√Hz |
| Non Linearity (IEEE norm) | 0.3 | 0.3 | 0.3 | % FS |
| Endurance shock (500 times) | 1500 | 1500 | 1500 | g |
