Zoom the image with the mouse
Safran
Safran MS1000T High Temperature MEMS Accelerometer
Product Code:
MS1000T
Condition:
New
Weight:
1.00 KGS
Width:
8.90
(cm)
Height:
3.20
(cm)
Depth:
8.90
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
The New MS1000T is the best in class MEMS accelerometer specifically designed for high-temperature directional drilling applications.
This accelerometer takes benefit from MS1000 and TS1000T family, to make it the best high temperature accelerometer product made specifically for high-temperature and drilling market.
Considered a single axis accelerometer, the MS1000T is known for its low noise, high-temperature performance. It measures acceleration along a single specified axis.
ADVANTAGES
Uniquely Designed For Drilling
The TS1000T and MS1000T high-temperature MEMS accelerometers are specifically designed for inertial directional drilling applications because they can withstand extreme shock and vibration, as well as high temperatures. The TS1000T and MS1000T have a shock survivability of 6000 g and an endurance shock tolerance of 1500 g. Unconventional resource extraction requires sophisticated drilling technologies, and the TS1000T and MS1000T help with complex drilling operations including sidetracking, fault drilling, multiple target zones and applications that entail multiple wells.
Built-In Self-Test Function
The built-in self-test mode generates a square wave signal on the device outputs (OUTP & OUTN) and can be used for device failure detection. This can be helpful to prevent system faults before they occur.
Ensures Safety & Reliability
The high quality sensor design, the MEMS Accelerometer products support test engineers around the world quickly and flexibly, to ensure safety and reliability of vehicles, equipment and buildings.
| Key Parameters | MS1002T | MS1030T | Unit |
| Full-Scale acceleration | ±2 | ±30 | g |
| Residual Bias modeling error | 0.3 | 4.5 | mg |
| Long-term Bias repeatability | 0.45 | 6.5 | mg |
| Residual Scale factor modeling error | 120 | 120 | ppm |
| Noise in band | 7 | 102 | μg/√Hz |
| Non Linearity (IEEE norm) | 0.3 | 0.3 | % FS |
| Endurance shocks (500 times) | 1’000 | 1’000 | g |
5 customers are viewing this product
Details
The New MS1000T is the best in class MEMS accelerometer specifically designed for high-temperature directional drilling applications.
This accelerometer takes benefit from MS1000 and TS1000T family, to make it the best high temperature accelerometer product made specifically for high-temperature and drilling market.
Considered a single axis accelerometer, the MS1000T is known for its low noise, high-temperature performance. It measures acceleration along a single specified axis.
ADVANTAGES
Uniquely Designed For Drilling
The TS1000T and MS1000T high-temperature MEMS accelerometers are specifically designed for inertial directional drilling applications because they can withstand extreme shock and vibration, as well as high temperatures. The TS1000T and MS1000T have a shock survivability of 6000 g and an endurance shock tolerance of 1500 g. Unconventional resource extraction requires sophisticated drilling technologies, and the TS1000T and MS1000T help with complex drilling operations including sidetracking, fault drilling, multiple target zones and applications that entail multiple wells.
Built-In Self-Test Function
The built-in self-test mode generates a square wave signal on the device outputs (OUTP & OUTN) and can be used for device failure detection. This can be helpful to prevent system faults before they occur.
Ensures Safety & Reliability
The high quality sensor design, the MEMS Accelerometer products support test engineers around the world quickly and flexibly, to ensure safety and reliability of vehicles, equipment and buildings.
| Key Parameters | MS1002T | MS1030T | Unit |
| Full-Scale acceleration | ±2 | ±30 | g |
| Residual Bias modeling error | 0.3 | 4.5 | mg |
| Long-term Bias repeatability | 0.45 | 6.5 | mg |
| Residual Scale factor modeling error | 120 | 120 | ppm |
| Noise in band | 7 | 102 | μg/√Hz |
| Non Linearity (IEEE norm) | 0.3 | 0.3 | % FS |
| Endurance shocks (500 times) | 1’000 | 1’000 | g |
