Zoom the image with the mouse
PPC Belden
PPC Belden PCAFVXG17 CAT6A Cable (500 pcs)
Product Code:
PCAFVXG17 BLKR0500
Condition:
New
Weight:
1.00 KGS
$392.86
CAT6A (500MHz), 4-Pair, F/UTP-Shielded, Riser-CMR, CMX Outdoor, Premise Horizontal Cable, Pair separator, Ripcord, 17AWG CCS Ground
PPC’s Hybrid CAT6A wire “co-jackets” a coppe-clad, steel ground wire and a shielded CAT6A cable into a single wire. This is especially useful for 5G premises applications where the exterior antenna must be grounded for safety and performance. PPC’s Hybrid CAT6A cable is an alternative to single CAT7 wire where special connectors and installation procedures are typically required. This PPC solution simplifies the install with a standard CAT6 termination while maintaining the full performance requirements of specialty 5G premises installations.
Package includes: 500 pieces of connectors.
| Performance Specifications | |
| Specification | Value |
| Conductors: 4 Pairs | AWG: 23, Conductor Material: BC - Bare Copper |
| Insulation Material | PO-Polyolefin |
| Jacket | UV Resistant PVC (720 hr) |
| Nominal Diameter | 0.325” (8.3mm) x 0.455” (11.6mm) |
| Suitability | Indoor, Outdoor, Sunlight Resistant, Oil Resistant |
| Storage Temperature Range | -4°F To 167°F (-20°C To 75°C) |
| Installation Temperature Range | 32°F To 122°F (0°C To 50°C) |
| Operating Temperature Range | -4°F To 167°F (-20°C To 75°C) |
| UL Temperature Range | UL CMR/CMX-Outdoor |
| Max Recommended Pulling Tension | 40 lbs |
| Min. Bend Radius/Minor Axis | 3.25 in |
| Min. Bend/Installation | 3.25 in |
| Electrical Properties | |
| Specification | Value |
| Capacitance (pF/ft) | 17 |
| Delay (ns/100 m) | 537 @ 100 MHz |
| DCR Unbalance @ 20°C | 3% |
| Nominal Velocity of Propogation VP (%) | 64 |
| DCR @ 20°C (Ohm/100m) | 7.3 |
| NEC/(UL) Specification | CMR, CMX-Outdoor |
| Standards | Category 6A - TIA 568.C.2, UL444 |
5 customers are viewing this product
Details
CAT6A (500MHz), 4-Pair, F/UTP-Shielded, Riser-CMR, CMX Outdoor, Premise Horizontal Cable, Pair separator, Ripcord, 17AWG CCS Ground
PPC’s Hybrid CAT6A wire “co-jackets” a coppe-clad, steel ground wire and a shielded CAT6A cable into a single wire. This is especially useful for 5G premises applications where the exterior antenna must be grounded for safety and performance. PPC’s Hybrid CAT6A cable is an alternative to single CAT7 wire where special connectors and installation procedures are typically required. This PPC solution simplifies the install with a standard CAT6 termination while maintaining the full performance requirements of specialty 5G premises installations.
Package includes: 500 pieces of connectors.
| Performance Specifications | |
| Specification | Value |
| Conductors: 4 Pairs | AWG: 23, Conductor Material: BC - Bare Copper |
| Insulation Material | PO-Polyolefin |
| Jacket | UV Resistant PVC (720 hr) |
| Nominal Diameter | 0.325” (8.3mm) x 0.455” (11.6mm) |
| Suitability | Indoor, Outdoor, Sunlight Resistant, Oil Resistant |
| Storage Temperature Range | -4°F To 167°F (-20°C To 75°C) |
| Installation Temperature Range | 32°F To 122°F (0°C To 50°C) |
| Operating Temperature Range | -4°F To 167°F (-20°C To 75°C) |
| UL Temperature Range | UL CMR/CMX-Outdoor |
| Max Recommended Pulling Tension | 40 lbs |
| Min. Bend Radius/Minor Axis | 3.25 in |
| Min. Bend/Installation | 3.25 in |
| Electrical Properties | |
| Specification | Value |
| Capacitance (pF/ft) | 17 |
| Delay (ns/100 m) | 537 @ 100 MHz |
| DCR Unbalance @ 20°C | 3% |
| Nominal Velocity of Propogation VP (%) | 64 |
| DCR @ 20°C (Ohm/100m) | 7.3 |
| NEC/(UL) Specification | CMR, CMX-Outdoor |
| Standards | Category 6A - TIA 568.C.2, UL444 |
Related Products
