Norsat International Inc.
Norsat MDKA160ANXG-WT-CW MEDIAN 160W Ka Single Band GaN BUC (AC + INT Ref High Stability + Cyber Hardened)
Any input frequency can be software selected with any output frequency.
The Standard Version MEDIAN BUCs offer higher gain to reduce the need for line amplifiers in long cable runs (IFL). In contrast, the WGS-Compatible Versions have lower gain to allow operation with IF signals driven up to 0 dBm.
Cyber-Hardened Intelligent BUCs are designed to enhance satellite ground terminal security for industries requiring optimized and flexible protection. These BUCs implement effective security management controls—including encrypted authentication, privacy, and access control—to ensure end-to-end message transmission. They help protect against session hijacking, password attacks, and eavesdropping.
KEY SPECIFICATIONS | |
Band | Ka-Band |
Frequency Sense | Non-Inverting |
Input Frequency Band 1 | 1.25 - 3.75 GHz |
Number Of Onboard Los | Single-Band |
Output Frequency Band 1 | 27.50 - 30.00 GHz |
Output Power Rated | 160W |
Reference Type | Internal High Stability |
RF SPECIFICATIONS | |
AM-PM Conversion | < 2 Deg/dB @ Plin |
Attenuator Range | 30 dB variable in 0.1 dB steps |
Gain Flatness (54Mhz) | 2 dB p-p max |
Gain Flatness (Over Full Band) | 4 dB p-p max |
Gain Variation Over Temperature (Open Loop) | 4 dB p-p max |
Gain Variation Over Temperature (Witg AGC) | 1 dB p-p max |
Gain Version | WGS Compatility Option |
Input Impedance | 50 Ohm |
Input Power Detector Range | -35 to 0 dBm |
Input VSWR | 1.5 : 1 |
Level Stability With ALC | ± 0.5 dB |
Output Noise Power Density Tx | < -73 dBm/Hz |
Output Plin | +49 dBm |
Output Psat | +52 dBm |
Output Spurious In Band | -60 dBc |
Output Spurious Out Of Band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
Output VSWR | 1.3 : 1 max |
Small Signal Gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
Current Consumption Plin | 900 VA |
Current Consumption Psat | 1150 VA |
Output Power Detector Range | Rated power to -20 dB |
Power Reading Accuracy | ± 1.0 dB max. |
Power Requirements | 100 to 240 VAC |
Power Supply | AC Powered |
INTERFACE SPECIFICATIONS | |
IF Connector | TNC |
Output Interface | WR28 UG Cover with Groove |
M AND C SPECIFICATIONS | |
M And C Interface | Cyber Hardened |
Option | Cyber Hardened |
ENVIRONMENTAL SPECIFICATIONS | |
Altitude | 10,000 ft (3,000 m) ASL |
Humidity | 100% Condensing |
Temperature Operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
Product Height Case 1 | 259 mm |
Product Length Case 1 | 411 mm |
Product Weight | 20 kg |
Product Width Case 1 | 254 mm |
ADDITIONAL INFORMATION | |
Aluminium Content | 0 Kg |
Aluminium Total Value | $ 0 |
Country Of Origin | Made in United States of America |
ECCN Number | EAR99 |
Ex Works | Richmond, BC, Canada |
Harmonized System Code | 8517620090 |
Package Height Case 1 | 419.1 mm |
Package Length Case 1 | 609.6 mm |
Package Width Case 1 | 381.0 mm |
Unit Package Dimensions | 18.14 kg |
Warranty | 3 years |
Any input frequency can be software selected with any output frequency.
The Standard Version MEDIAN BUCs offer higher gain to reduce the need for line amplifiers in long cable runs (IFL). In contrast, the WGS-Compatible Versions have lower gain to allow operation with IF signals driven up to 0 dBm.
Cyber-Hardened Intelligent BUCs are designed to enhance satellite ground terminal security for industries requiring optimized and flexible protection. These BUCs implement effective security management controls—including encrypted authentication, privacy, and access control—to ensure end-to-end message transmission. They help protect against session hijacking, password attacks, and eavesdropping.
KEY SPECIFICATIONS | |
Band | Ka-Band |
Frequency Sense | Non-Inverting |
Input Frequency Band 1 | 1.25 - 3.75 GHz |
Number Of Onboard Los | Single-Band |
Output Frequency Band 1 | 27.50 - 30.00 GHz |
Output Power Rated | 160W |
Reference Type | Internal High Stability |
RF SPECIFICATIONS | |
AM-PM Conversion | < 2 Deg/dB @ Plin |
Attenuator Range | 30 dB variable in 0.1 dB steps |
Gain Flatness (54Mhz) | 2 dB p-p max |
Gain Flatness (Over Full Band) | 4 dB p-p max |
Gain Variation Over Temperature (Open Loop) | 4 dB p-p max |
Gain Variation Over Temperature (Witg AGC) | 1 dB p-p max |
Gain Version | WGS Compatility Option |
Input Impedance | 50 Ohm |
Input Power Detector Range | -35 to 0 dBm |
Input VSWR | 1.5 : 1 |
Level Stability With ALC | ± 0.5 dB |
Output Noise Power Density Tx | < -73 dBm/Hz |
Output Plin | +49 dBm |
Output Psat | +52 dBm |
Output Spurious In Band | -60 dBc |
Output Spurious Out Of Band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
Output VSWR | 1.3 : 1 max |
Small Signal Gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
Current Consumption Plin | 900 VA |
Current Consumption Psat | 1150 VA |
Output Power Detector Range | Rated power to -20 dB |
Power Reading Accuracy | ± 1.0 dB max. |
Power Requirements | 100 to 240 VAC |
Power Supply | AC Powered |
INTERFACE SPECIFICATIONS | |
IF Connector | TNC |
Output Interface | WR28 UG Cover with Groove |
M AND C SPECIFICATIONS | |
M And C Interface | Cyber Hardened |
Option | Cyber Hardened |
ENVIRONMENTAL SPECIFICATIONS | |
Altitude | 10,000 ft (3,000 m) ASL |
Humidity | 100% Condensing |
Temperature Operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
Product Height Case 1 | 259 mm |
Product Length Case 1 | 411 mm |
Product Weight | 20 kg |
Product Width Case 1 | 254 mm |
ADDITIONAL INFORMATION | |
Aluminium Content | 0 Kg |
Aluminium Total Value | $ 0 |
Country Of Origin | Made in United States of America |
ECCN Number | EAR99 |
Ex Works | Richmond, BC, Canada |
Harmonized System Code | 8517620090 |
Package Height Case 1 | 419.1 mm |
Package Length Case 1 | 609.6 mm |
Package Width Case 1 | 381.0 mm |
Unit Package Dimensions | 18.14 kg |
Warranty | 3 years |