

Norsat International Inc.
KEY SPECIFICATIONS | |
band | C-Band |
frequency sense | Non-inverting |
input frequency band 1 | 950 - 1525 MHz |
output frequency band 1 | 5850 - 6425 MHz |
output power rated | 100W |
reference type | Internal Standard Stability |
RF SPECIFICATIONS | |
19 dB min of NPR | 44 dBm |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 0.25 dB p-p max |
gain flatness (36MHz) | 1 dB p-p max |
gain flatness (over full band) | 3 dB p-p max |
gain variation over temperature (open loop) | 3 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatibility Option |
harmonics | -50 dBc max. |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Rx | 145 dBm/Hz |
output noise power density Tx | 77 dBm/Hz |
output P1dB | 50 dBm |
output Plin | 47 dBm |
output spurious in band | -65 dBc |
output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -54 dBc/Hz |
phase noise 0.1kHz offset max | -79 dBc/Hz |
phase noise 1kHz offset max | -89 dBc/Hz |
phase noise 10kHz offset max | -94 dBc/Hz |
phase noise 100kHz offset max | -100 dBc/Hz |
phase noise 1000kHz offset max | -110 dBc/Hz |
small signal gain | 70 dB min |
ELECTRICAL SPECIFICATIONS | |
current consumption Plin | 420 VA |
current consumption Psat | 510 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
IF connector | N |
M and C option | Cyber Hardened |
output connector | CPR-137G |
ENVIRONMENTAL SPECIFICATIONS | |
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
product height case 1 | 155 mm |
product length case 1 | 267 mm |
product weight | 6.1 kg |
product width case 1 | 152 mm |
KEY SPECIFICATIONS | |
band | C-Band |
frequency sense | Non-inverting |
input frequency band 1 | 950 - 1525 MHz |
output frequency band 1 | 5850 - 6425 MHz |
output power rated | 100W |
reference type | Internal Standard Stability |
RF SPECIFICATIONS | |
19 dB min of NPR | 44 dBm |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 0.25 dB p-p max |
gain flatness (36MHz) | 1 dB p-p max |
gain flatness (over full band) | 3 dB p-p max |
gain variation over temperature (open loop) | 3 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatibility Option |
harmonics | -50 dBc max. |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Rx | 145 dBm/Hz |
output noise power density Tx | 77 dBm/Hz |
output P1dB | 50 dBm |
output Plin | 47 dBm |
output spurious in band | -65 dBc |
output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -54 dBc/Hz |
phase noise 0.1kHz offset max | -79 dBc/Hz |
phase noise 1kHz offset max | -89 dBc/Hz |
phase noise 10kHz offset max | -94 dBc/Hz |
phase noise 100kHz offset max | -100 dBc/Hz |
phase noise 1000kHz offset max | -110 dBc/Hz |
small signal gain | 70 dB min |
ELECTRICAL SPECIFICATIONS | |
current consumption Plin | 420 VA |
current consumption Psat | 510 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
IF connector | N |
M and C option | Cyber Hardened |
output connector | CPR-137G |
ENVIRONMENTAL SPECIFICATIONS | |
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
product height case 1 | 155 mm |
product length case 1 | 267 mm |
product weight | 6.1 kg |
product width case 1 | 152 mm |