Norsat International Inc.
| KEY SPECIFICATIONS | |
| Band | Ka-Band |
| External Ref Freq | 10 MHz, -12 to +5 dBm |
| Frequency Sense | Non-Inverting |
| Input Frequency Band 1 | 950 - 1950 MHz (software selectable) |
| Input Frequency Band 2 | 1000 - 2000 MHz (software selectable) |
| LO Frequency 1 | 26.50 GHz or 26.55 GHz |
| LO Frequency 2 | 27.25 GHz or 27.30 GHz |
| LO Frequency 3 | 28.00 GHz or 28.05 GHz |
| LO Frequency 4 | 29.00 GHz or 29.05 GHz |
| Number Of Onboard Los | Quad-Band |
| Output Frequency Band 1 | 27.5 - 28.5 GHz |
| Output Frequency Band 2 | 28.25 - 29.25 GHz |
| Output Frequency Band 3 | 29.0 - 30.0 GHz |
| Output Frequency Band 4 | 30.0 - 31.0 GHz |
| Output Power Rated | 80W |
| Reference Type | External Reference |
| RF SPECIFICATIONS | |
| AM-PM Conversion | <2°/dB @Plin |
| Attenuator Range | 30 dB variable in 0.1 dB steps |
| Gain Flatness (54Mhz) | 2 dB p-p max for any sub-band |
| Gain Flatness (Over Full Band) | 4 dB p-p max for any sub-band |
| Gain Variation Over Temperature (Open Loop) | 4 dB p-p max for any sub-band |
| Gain Variation Over Temperature (With AGC) | 1 dB p-p max for any sub-band |
| Input Power Detector Range | -35 to 0 dBm |
| Input VSWR | 1.5 : 1 |
| Level Stability With ALC | ± 0.5 dB |
| Output Noise Power Density Tx | < -74 dBm/Hz |
| Output Plin | +46 dBm min. |
| Output Power Detector Range | Rated power to -20 dB |
| Output Psat | +49 dBm typ. |
| Output Spurious In Band | -60 dBc |
| Output Spurious Out Of Band | -60 dBc, Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
| Output VSWR | 1.3 : 1 max |
| Phase Noise 0.01Khz Offset Max | -43 dBc/Hz |
| Phase Noise 0.1Khz Offset Max | -63 dBc/Hz |
| Phase Noise 1Khz Offset Max | -73 dBc/Hz |
| Phase Noise 10Khz Offset Max | -83 dBc/Hz |
| Phase Noise 100Khz Offset Max | -93 dBc/Hz |
| Phase Noise 1000Khz Offset Max | -103 dBc/Hz |
| Small Signal Gain | 70 dB min. |
| ELECTRICAL SPECIFICATIONS | |
| Current Consumption Plin | 520 VA |
| Current Consumption Psat | 700 VA |
| Power Reading Accuracy | ± 1.0 dB max. |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
| Power Supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
| IF Connector | N-Connector |
| M And C Interface | Ethernet (HTTP, Telnet, SNMPv2c) via RJ45 Connector RS232, RS485 via MS-Type Connector |
| Output Interface | WR28 UG Cover with Groove |
| ENVIRONMENTAL SPECIFICATIONS | |
| Altitude | 10,000 ft (3,000 m) ASL |
| Humidity | 100% Condensing |
| Temperature Operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
| Product Height | 183 mm |
| Product Length | 310 mm |
| Product Weight | 8.8 kg |
| Product Width | 183 mm |
| ADDITIONAL INFORMATION | |
| Country Of Origin | Made in United States of America |
| ECCN Number | EAR99 |
| Ex Works | Richmond, BC, Canada |
| Harmonized System Code | 8517620090 |
| KEY SPECIFICATIONS | |
| Band | Ka-Band |
| External Ref Freq | 10 MHz, -12 to +5 dBm |
| Frequency Sense | Non-Inverting |
| Input Frequency Band 1 | 950 - 1950 MHz (software selectable) |
| Input Frequency Band 2 | 1000 - 2000 MHz (software selectable) |
| LO Frequency 1 | 26.50 GHz or 26.55 GHz |
| LO Frequency 2 | 27.25 GHz or 27.30 GHz |
| LO Frequency 3 | 28.00 GHz or 28.05 GHz |
| LO Frequency 4 | 29.00 GHz or 29.05 GHz |
| Number Of Onboard Los | Quad-Band |
| Output Frequency Band 1 | 27.5 - 28.5 GHz |
| Output Frequency Band 2 | 28.25 - 29.25 GHz |
| Output Frequency Band 3 | 29.0 - 30.0 GHz |
| Output Frequency Band 4 | 30.0 - 31.0 GHz |
| Output Power Rated | 80W |
| Reference Type | External Reference |
| RF SPECIFICATIONS | |
| AM-PM Conversion | <2°/dB @Plin |
| Attenuator Range | 30 dB variable in 0.1 dB steps |
| Gain Flatness (54Mhz) | 2 dB p-p max for any sub-band |
| Gain Flatness (Over Full Band) | 4 dB p-p max for any sub-band |
| Gain Variation Over Temperature (Open Loop) | 4 dB p-p max for any sub-band |
| Gain Variation Over Temperature (With AGC) | 1 dB p-p max for any sub-band |
| Input Power Detector Range | -35 to 0 dBm |
| Input VSWR | 1.5 : 1 |
| Level Stability With ALC | ± 0.5 dB |
| Output Noise Power Density Tx | < -74 dBm/Hz |
| Output Plin | +46 dBm min. |
| Output Power Detector Range | Rated power to -20 dB |
| Output Psat | +49 dBm typ. |
| Output Spurious In Band | -60 dBc |
| Output Spurious Out Of Band | -60 dBc, Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
| Output VSWR | 1.3 : 1 max |
| Phase Noise 0.01Khz Offset Max | -43 dBc/Hz |
| Phase Noise 0.1Khz Offset Max | -63 dBc/Hz |
| Phase Noise 1Khz Offset Max | -73 dBc/Hz |
| Phase Noise 10Khz Offset Max | -83 dBc/Hz |
| Phase Noise 100Khz Offset Max | -93 dBc/Hz |
| Phase Noise 1000Khz Offset Max | -103 dBc/Hz |
| Small Signal Gain | 70 dB min. |
| ELECTRICAL SPECIFICATIONS | |
| Current Consumption Plin | 520 VA |
| Current Consumption Psat | 700 VA |
| Power Reading Accuracy | ± 1.0 dB max. |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
| Power Supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
| IF Connector | N-Connector |
| M And C Interface | Ethernet (HTTP, Telnet, SNMPv2c) via RJ45 Connector RS232, RS485 via MS-Type Connector |
| Output Interface | WR28 UG Cover with Groove |
| ENVIRONMENTAL SPECIFICATIONS | |
| Altitude | 10,000 ft (3,000 m) ASL |
| Humidity | 100% Condensing |
| Temperature Operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
| Product Height | 183 mm |
| Product Length | 310 mm |
| Product Weight | 8.8 kg |
| Product Width | 183 mm |
| ADDITIONAL INFORMATION | |
| Country Of Origin | Made in United States of America |
| ECCN Number | EAR99 |
| Ex Works | Richmond, BC, Canada |
| Harmonized System Code | 8517620090 |