Norsat International Inc.
| KEY SPECIFICATIONS | |
| Band | X-Band |
| Color | Tan (FS33303) |
| External Ref Freq | 10 MHz -12 to +5 dBm |
| Frequency Sense | Non-Inverting |
| Input Frequency Band 1 | 950 - 1450 MHz |
| LO Stability | 6.95 GHz |
| Number Of Onboard Los | Single-Band |
| Output Frequency Band 1 | 7.9 - 8.4 GHz |
| Output Power Rated | 50W |
| Product Family | MEDIAN |
| Reference Type | External |
| RF SPECIFICATIONS | |
| AM-PM Conversion | < 3.0 deg/dB @ Rated Power |
| Attenuator Range | 30 dB variable in 0.1 dB steps |
| Gain Flatness (1Mhz) | 0.25 dB p-p max |
| Gain Flatness (36Mhz) | 1 dB p-p max |
| Gain Flatness (Over Full Band) | 3 dB p-p max |
| Gain Variation Over Temperature (Open Loop) | 3 dB p-p max |
| Gain Variation Over Temperature (With AGC) | 1 dB p-p max |
| Group Delay Linear | 0.03 ns/MHz |
| Group Delay Parabolic | 0.003 ns/MHz² |
| Group Delay Ripple | 1 ns p-p Over Any 36 MHz |
| Harmonics | -60 dBc max |
| IMD3 | -27 dBc max (2 carriers, 3 dB TOBO) |
| Input Power Detector Range | -55 to -20 dBm |
| Input VSWR | 1.5 : 1 |
| Level Stability With ALC | ± 0.5 dB |
| Mute | -70 dBc Max. |
| Output Noise Power Density Rx | < -79 dBm/Hz (w/o RX Reject Filer) |
| Output Noise Power Density Tx | < -79 dBm/Hz |
| Output P1db | +47 dBm min |
| Output Plin | 46 dBm (PLin is the maximum linear power as defined by MIL-STD-188-164C) |
| Output Spurious In Band | -65 dBc |
| Output Spurious Out Of Band | Complies with MIL STD 188-164C |
| Output VSWR | 1.5 : 1 max |
| Phase Noise 0.01Khz Offset Max | -55 dBc/Hz |
| Phase Noise 0.1Khz Offset Max | -80 dBc/Hz |
| Phase Noise 1000Khz Offset Max | -110 dBc/Hz |
| Small Signal Gain | 78 dB min |
| ELECTRICAL SPECIFICATIONS | |
| Output Power Detector Range | Rated Power to -20 dB |
| Power Consumption | 350W, 400VA |
| Power Reading Accuracy | ± 1.0 max |
| Power Requirements | 48 ± 11V DC |
| Power Supply | DC Powered |
| INTERFACE SPECIFICATIONS | |
| IF Connector | N-Connector |
| M And C Interface | Ethernet (HTTP, Telnet, SNMPv2c): via RJ-45 Connector RS-232/RS-485 Handheld Terminal: via MS-Type Connector FSK: multiplexed on Tx IFL |
| Output Connector | CPR-112G |
| ENVIRONMENTAL SPECIFICATIONS | |
| Altitude | 10,000 ft (3,000 m) ASL |
| Humidity | 100% Condensing |
| Temperature Operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
| Product Height | 145 mm |
| Product Length | 267 mm |
| Product Weight | 5.2 kg |
| Product Width | 152 mm |
| ADDITIONAL INFORMATION | |
| Country Of Origin | Made in United States of America |
| ECCN Number | EAR99 |
| Ex Works | Richmond, BC, Canada |
| Harmonized System Code | 8517620090 |
| KEY SPECIFICATIONS | |
| Band | X-Band |
| Color | Tan (FS33303) |
| External Ref Freq | 10 MHz -12 to +5 dBm |
| Frequency Sense | Non-Inverting |
| Input Frequency Band 1 | 950 - 1450 MHz |
| LO Stability | 6.95 GHz |
| Number Of Onboard Los | Single-Band |
| Output Frequency Band 1 | 7.9 - 8.4 GHz |
| Output Power Rated | 50W |
| Product Family | MEDIAN |
| Reference Type | External |
| RF SPECIFICATIONS | |
| AM-PM Conversion | < 3.0 deg/dB @ Rated Power |
| Attenuator Range | 30 dB variable in 0.1 dB steps |
| Gain Flatness (1Mhz) | 0.25 dB p-p max |
| Gain Flatness (36Mhz) | 1 dB p-p max |
| Gain Flatness (Over Full Band) | 3 dB p-p max |
| Gain Variation Over Temperature (Open Loop) | 3 dB p-p max |
| Gain Variation Over Temperature (With AGC) | 1 dB p-p max |
| Group Delay Linear | 0.03 ns/MHz |
| Group Delay Parabolic | 0.003 ns/MHz² |
| Group Delay Ripple | 1 ns p-p Over Any 36 MHz |
| Harmonics | -60 dBc max |
| IMD3 | -27 dBc max (2 carriers, 3 dB TOBO) |
| Input Power Detector Range | -55 to -20 dBm |
| Input VSWR | 1.5 : 1 |
| Level Stability With ALC | ± 0.5 dB |
| Mute | -70 dBc Max. |
| Output Noise Power Density Rx | < -79 dBm/Hz (w/o RX Reject Filer) |
| Output Noise Power Density Tx | < -79 dBm/Hz |
| Output P1db | +47 dBm min |
| Output Plin | 46 dBm (PLin is the maximum linear power as defined by MIL-STD-188-164C) |
| Output Spurious In Band | -65 dBc |
| Output Spurious Out Of Band | Complies with MIL STD 188-164C |
| Output VSWR | 1.5 : 1 max |
| Phase Noise 0.01Khz Offset Max | -55 dBc/Hz |
| Phase Noise 0.1Khz Offset Max | -80 dBc/Hz |
| Phase Noise 1000Khz Offset Max | -110 dBc/Hz |
| Small Signal Gain | 78 dB min |
| ELECTRICAL SPECIFICATIONS | |
| Output Power Detector Range | Rated Power to -20 dB |
| Power Consumption | 350W, 400VA |
| Power Reading Accuracy | ± 1.0 max |
| Power Requirements | 48 ± 11V DC |
| Power Supply | DC Powered |
| INTERFACE SPECIFICATIONS | |
| IF Connector | N-Connector |
| M And C Interface | Ethernet (HTTP, Telnet, SNMPv2c): via RJ-45 Connector RS-232/RS-485 Handheld Terminal: via MS-Type Connector FSK: multiplexed on Tx IFL |
| Output Connector | CPR-112G |
| ENVIRONMENTAL SPECIFICATIONS | |
| Altitude | 10,000 ft (3,000 m) ASL |
| Humidity | 100% Condensing |
| Temperature Operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
| Product Height | 145 mm |
| Product Length | 267 mm |
| Product Weight | 5.2 kg |
| Product Width | 152 mm |
| ADDITIONAL INFORMATION | |
| Country Of Origin | Made in United States of America |
| ECCN Number | EAR99 |
| Ex Works | Richmond, BC, Canada |
| Harmonized System Code | 8517620090 |