Norsat International Inc.
| KEY SPECIFICATIONS | |
| Band | X-Band |
| External Ref Freq | 10 MHz, -12 to +5 dBm |
| Frequency Sense | Non-Inverting |
| Input Frequency Band 1 | 950 - 1450 MHz |
| LO Frequency 1 | 6.95 GHz |
| Output Frequency Band 1 | 7.9 - 8.4 GHz |
| Output Power Rated | 25W |
| Reference Type | External Reference |
| RF SPECIFICATIONS | |
| AM-PM Conversion | <3°/dB @ Rated Power |
| Attenuator Range | 30 dB variable in 0.1 dB steps |
| Gain Flatness (1Mhz) | 0.25 dB p-p max |
| Gain Flatness (36Mhz) | 1 dB p-p max |
| Gain Flatness (Over Full Band) | 3 dB p-p max |
| Gain Variation Over Temperature (Open Loop) | 3 dB p-p max |
| Gain Variation Over Temperature (With AGC) | 1 dB p-p max |
| Group Delay Linear | 0.03 ns/MHz |
| Group Delay Parabolic | 0.003 ns/MHz² |
| Group Delay Ripple | 1 ns p-p Over Any 36 MHz |
| IMD3 | -27 dBc max. (2 carriers, 3 dB TOBO) |
| Input Power Detector Range | -55 to -20 dBm |
| Input VSWR | 1.5 : 1 |
| Level Stability With ALC | ± 0.5 dB |
| Mute | -70 dBc max. |
| Output Noise Power Density Rx | w/o Rx Reject Filter: < -79 dBm/Hz |
| Output Noise Power Density Tx | < -79 dBm/Hz |
| Output Plin | +43.5 dBm |
| Output Power Detector Range | Rated power to -20 dB |
| Output VSWR | 1.5 : 1 max |
| Phase Noise 100Hz Offset Max | -80 dBc/Hz |
| Phase Noise 100Khz Offset Max | -100 dBc/Hz |
| Phase Noise 10Hz Offset Max | -55 dBc/Hz |
| Phase Noise 10Khz Offset Max | -95 dBc/Hz |
| Phase Noise 1Khz Offset Max | -90 dBc/Hz |
| Phase Noise 1Mhz Offset Max | -110 dBc/Hz |
| Small Signal Gain | 75 dB min |
| Spurious In Band | -65 dBc |
| Spurious Out Of Band | Complies with MIL-STD 188-164C, -60 dBc max. |
| ELECTRICAL SPECIFICATIONS | |
| Power Consumption | 175W, 220VA |
| Power Reading Accuracy | ± 1.0 dB max. |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
| Power Supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
| IF Connector | N-Connector |
| M And C Interface | Ethernet, RS232, RS485 |
| Output Interface | CPR-112G |
| ENVIRONMENTAL SPECIFICATIONS | |
| Altitude | 10,000 ft (3,000 m) ASL |
| Humidity | 100% Condensing |
| Temperature Operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
| Product Height | 142 mm |
| Product Length | 267 mm |
| Product Weight | 5.3 kg |
| Product Width | 152 mm |
| ADDITIONAL INFORMATION | |
| Country Of Origin | Made in United States of America |
| ECCN Number | EAR99 |
| Ex Works | Richmond, BC, Canada |
| Harmonized System Code | 8517620090 |
| KEY SPECIFICATIONS | |
| Band | X-Band |
| External Ref Freq | 10 MHz, -12 to +5 dBm |
| Frequency Sense | Non-Inverting |
| Input Frequency Band 1 | 950 - 1450 MHz |
| LO Frequency 1 | 6.95 GHz |
| Output Frequency Band 1 | 7.9 - 8.4 GHz |
| Output Power Rated | 25W |
| Reference Type | External Reference |
| RF SPECIFICATIONS | |
| AM-PM Conversion | <3°/dB @ Rated Power |
| Attenuator Range | 30 dB variable in 0.1 dB steps |
| Gain Flatness (1Mhz) | 0.25 dB p-p max |
| Gain Flatness (36Mhz) | 1 dB p-p max |
| Gain Flatness (Over Full Band) | 3 dB p-p max |
| Gain Variation Over Temperature (Open Loop) | 3 dB p-p max |
| Gain Variation Over Temperature (With AGC) | 1 dB p-p max |
| Group Delay Linear | 0.03 ns/MHz |
| Group Delay Parabolic | 0.003 ns/MHz² |
| Group Delay Ripple | 1 ns p-p Over Any 36 MHz |
| IMD3 | -27 dBc max. (2 carriers, 3 dB TOBO) |
| Input Power Detector Range | -55 to -20 dBm |
| Input VSWR | 1.5 : 1 |
| Level Stability With ALC | ± 0.5 dB |
| Mute | -70 dBc max. |
| Output Noise Power Density Rx | w/o Rx Reject Filter: < -79 dBm/Hz |
| Output Noise Power Density Tx | < -79 dBm/Hz |
| Output Plin | +43.5 dBm |
| Output Power Detector Range | Rated power to -20 dB |
| Output VSWR | 1.5 : 1 max |
| Phase Noise 100Hz Offset Max | -80 dBc/Hz |
| Phase Noise 100Khz Offset Max | -100 dBc/Hz |
| Phase Noise 10Hz Offset Max | -55 dBc/Hz |
| Phase Noise 10Khz Offset Max | -95 dBc/Hz |
| Phase Noise 1Khz Offset Max | -90 dBc/Hz |
| Phase Noise 1Mhz Offset Max | -110 dBc/Hz |
| Small Signal Gain | 75 dB min |
| Spurious In Band | -65 dBc |
| Spurious Out Of Band | Complies with MIL-STD 188-164C, -60 dBc max. |
| ELECTRICAL SPECIFICATIONS | |
| Power Consumption | 175W, 220VA |
| Power Reading Accuracy | ± 1.0 dB max. |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
| Power Supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
| IF Connector | N-Connector |
| M And C Interface | Ethernet, RS232, RS485 |
| Output Interface | CPR-112G |
| ENVIRONMENTAL SPECIFICATIONS | |
| Altitude | 10,000 ft (3,000 m) ASL |
| Humidity | 100% Condensing |
| Temperature Operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
| Product Height | 142 mm |
| Product Length | 267 mm |
| Product Weight | 5.3 kg |
| Product Width | 152 mm |
| ADDITIONAL INFORMATION | |
| Country Of Origin | Made in United States of America |
| ECCN Number | EAR99 |
| Ex Works | Richmond, BC, Canada |
| Harmonized System Code | 8517620090 |