

KEY SPECIFICATIONS | |
band | C-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1525 MHz |
output frequency band 1 | 5.850 - 6.425 GHz |
output power rated | 200W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
attenuator range | 30 dB Variable in 0.1 dB Steps |
gain flatness (1MHz) | 0.25 dB p-p max |
gain flatness (36MHz) | 1.5 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 3 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatibility Option |
harmonics | -50 dBc max |
IMD3 | -26 dBc max |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 max |
Level Stability with ALC | ± 0.5 dB |
output noise power density Rx | < -145 dBm/Hz |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +53 dBm min |
output spurious in band | -70 dBc |
output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -115 dBC/Hz |
phase noise 0.1kHz offset max | -140 dBc/Hz |
small signal gain | 73 dB min |
ELECTRICAL SPECIFICATIONS | |
current consumption | 1300 VA |
output power detector range | Rated Power to -20 dB |
power reading accuracy | ± 1.0 dB max |
power requirements | 200 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
IF connector | N |
M and C option | Standard M&C |
output connector | CPR-137G |
ENVIRONMENTAL SPECIFICATIONS | |
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
product height | 193 mm |
product length | 411 mm |
product weight | 14.9 kg |
product width | 254 mm |
KEY SPECIFICATIONS | |
band | C-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1525 MHz |
output frequency band 1 | 5.850 - 6.425 GHz |
output power rated | 200W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
attenuator range | 30 dB Variable in 0.1 dB Steps |
gain flatness (1MHz) | 0.25 dB p-p max |
gain flatness (36MHz) | 1.5 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 3 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatibility Option |
harmonics | -50 dBc max |
IMD3 | -26 dBc max |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 max |
Level Stability with ALC | ± 0.5 dB |
output noise power density Rx | < -145 dBm/Hz |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +53 dBm min |
output spurious in band | -70 dBc |
output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -115 dBC/Hz |
phase noise 0.1kHz offset max | -140 dBc/Hz |
small signal gain | 73 dB min |
ELECTRICAL SPECIFICATIONS | |
current consumption | 1300 VA |
output power detector range | Rated Power to -20 dB |
power reading accuracy | ± 1.0 dB max |
power requirements | 200 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
IF connector | N |
M and C option | Standard M&C |
output connector | CPR-137G |
ENVIRONMENTAL SPECIFICATIONS | |
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
product height | 193 mm |
product length | 411 mm |
product weight | 14.9 kg |
product width | 254 mm |
Download Name |