iDirect
IQ 200 Rackmount Satellite Modem
The iQ 200 Rackmount is part of ST Engineering iDirect’s DVB-S2/S2X modem series with a software-defined architecture for maximum flexibility and expansion. Ideal for cost-effective, small to medium enterprise and maritime applications, the iQ 200 Rackmount combines high-performance iQ series features with mobility.
Ideal for enterprise, cellular backhaul and maritime applications, the iQ 200 Rackmount combines high-performance iQ series features with mobility and can reach throughputs over 300 Mbps when being used in L2oS mode. Its licensable features enable the service provider to scale easily by adding more inbound throughput capabilities to the modem avoiding costly site visits or remote swap outs. It will also support high return throughput capabilities due to high Msps rate (up to 15 Msps) on the inbound and supports higher power BUCs and OpenAMIP mobility. The iQ Rackmount features a dual GigE Ethernet port and is compatible with a variety of ODU configurations. The modem’s ease of installation allows services providers to deploy their services quickly, in a cost-effective way.
The iQ 200 Rackmount is also available in a board-level form factor, iQ 200 Board, ideal for terminal integration.
Features of the iQ 200 Rackmount
- DVB-S2 (up to 45 Msps) / DVB-S2X (up to 100 Msps) outbound
- Supports a full range of DVB-S2X MODCODS up to 256APSK
- Adaptive TDMA up to 15 Msps, 16QAM
- Ideal for both fixed and mobility applications
- 10 and 50 MHz reference for BUC compatibility
- OpenAMIP compatibility for ease of integration
- Layer 2 and Layer 3 optimized
Network Topology | Rx | Tx | |
Modulation | DVB-S2X*/ACM QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK, 256 APSK |
DVB-S2*/ACM QPSK, 8PSK, 16APSK, 32APS |
Adaptive TDMA SS-BPSK, BPSK, QPSK, 8PSK,16QAM* |
FEC | Refer to the LBA guide | LDPC 1/4 - 8/9 | 2D 16-State 1/2 - 6/7 |
Symbol Rates | 5 Msps to 100 Msps | 1 Msps to 45 Msps | 128 ksps to 15 Msps |
Spread Spectrum* | SF: 2,4,8; Up to 7.5 Mcps | ||
Tx Interface | |||
Connector | F-Type 75 Ohm | ||
Frequency range L-band | 950 - 2150 MHz | ||
TX level | Pmax of +0 dBm to Pmin of -35dBm | ||
BUC power supply | +24V, 4.0A max available @connector TX out | ||
BUC reference | 10/50 MHz | ||
Rx Interface | |||
Connector | F-Type 75 Ohm | ||
Frequency | 950-2150 MHz | ||
LNB power supply | 13, 18, 21VDC @ 0.5A @ connector Rx in | ||
LNB LO selection | 22 kHz on/of | ||
Data / Management Interface | LAN: Two 10/100/1000 Mbps Ethernet RJ 45 Console |
||
Protocols Supported | TCP, UDP, ICMP, DHCP, NAT/PAT, DNS, ROHCv2, RIPv2, IGMPv2, IGMPv3, ICMP, IPv4 (IPv6 over L2oS), L3, VRRP, BGP | ||
Security | 256-bit AES Link Encryption (optional) | ||
Mechanical and Environmental | |||
Size | W 44.5 cm x D 32 cm x H 4.45cm (W 17.5 in x 12.6 in x 1.75 in) |
||
Weight | 4.5 kg (10 lbs) | ||
Temperature: | Operating 0° to +60°C (32° to +140°F) Storage -40° to +85°C (-40° to +185°F) |
||
Power Supply | |||
Input Voltage | 100-240VAC, 50-60Hz 36-76VDC with DC power supply |
The iQ 200 Rackmount is part of ST Engineering iDirect’s DVB-S2/S2X modem series with a software-defined architecture for maximum flexibility and expansion. Ideal for cost-effective, small to medium enterprise and maritime applications, the iQ 200 Rackmount combines high-performance iQ series features with mobility.
Ideal for enterprise, cellular backhaul and maritime applications, the iQ 200 Rackmount combines high-performance iQ series features with mobility and can reach throughputs over 300 Mbps when being used in L2oS mode. Its licensable features enable the service provider to scale easily by adding more inbound throughput capabilities to the modem avoiding costly site visits or remote swap outs. It will also support high return throughput capabilities due to high Msps rate (up to 15 Msps) on the inbound and supports higher power BUCs and OpenAMIP mobility. The iQ Rackmount features a dual GigE Ethernet port and is compatible with a variety of ODU configurations. The modem’s ease of installation allows services providers to deploy their services quickly, in a cost-effective way.
The iQ 200 Rackmount is also available in a board-level form factor, iQ 200 Board, ideal for terminal integration.
Features of the iQ 200 Rackmount
- DVB-S2 (up to 45 Msps) / DVB-S2X (up to 100 Msps) outbound
- Supports a full range of DVB-S2X MODCODS up to 256APSK
- Adaptive TDMA up to 15 Msps, 16QAM
- Ideal for both fixed and mobility applications
- 10 and 50 MHz reference for BUC compatibility
- OpenAMIP compatibility for ease of integration
- Layer 2 and Layer 3 optimized
Network Topology | Rx | Tx | |
Modulation | DVB-S2X*/ACM QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK, 256 APSK |
DVB-S2*/ACM QPSK, 8PSK, 16APSK, 32APS |
Adaptive TDMA SS-BPSK, BPSK, QPSK, 8PSK,16QAM* |
FEC | Refer to the LBA guide | LDPC 1/4 - 8/9 | 2D 16-State 1/2 - 6/7 |
Symbol Rates | 5 Msps to 100 Msps | 1 Msps to 45 Msps | 128 ksps to 15 Msps |
Spread Spectrum* | SF: 2,4,8; Up to 7.5 Mcps | ||
Tx Interface | |||
Connector | F-Type 75 Ohm | ||
Frequency range L-band | 950 - 2150 MHz | ||
TX level | Pmax of +0 dBm to Pmin of -35dBm | ||
BUC power supply | +24V, 4.0A max available @connector TX out | ||
BUC reference | 10/50 MHz | ||
Rx Interface | |||
Connector | F-Type 75 Ohm | ||
Frequency | 950-2150 MHz | ||
LNB power supply | 13, 18, 21VDC @ 0.5A @ connector Rx in | ||
LNB LO selection | 22 kHz on/of | ||
Data / Management Interface | LAN: Two 10/100/1000 Mbps Ethernet RJ 45 Console |
||
Protocols Supported | TCP, UDP, ICMP, DHCP, NAT/PAT, DNS, ROHCv2, RIPv2, IGMPv2, IGMPv3, ICMP, IPv4 (IPv6 over L2oS), L3, VRRP, BGP | ||
Security | 256-bit AES Link Encryption (optional) | ||
Mechanical and Environmental | |||
Size | W 44.5 cm x D 32 cm x H 4.45cm (W 17.5 in x 12.6 in x 1.75 in) |
||
Weight | 4.5 kg (10 lbs) | ||
Temperature: | Operating 0° to +60°C (32° to +140°F) Storage -40° to +85°C (-40° to +185°F) |
||
Power Supply | |||
Input Voltage | 100-240VAC, 50-60Hz 36-76VDC with DC power supply |