New
Zoom the image with the mouse
Global Invacom
Global Invacom PL7CD30T / PL7CD30R4 C-Band Optical RF Down Link
Product Code:
PL7CD30T / PL7CD30R4
Weight:
0.23 KGS
Width:
30.50
(cm)
Height:
10.20
(cm)
Depth:
2.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
Global Foxcom’s Platinum C-Band products are designed to provide full specification service up to a full 4dB optical budget at low cost.
Global Foxcom’s Platinum C-Band products are designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 4dB optical budget with the PL7CD30R4 receiver.
Utilizing Global Foxcom’s DigiRFtechnology, the user has full control of all important functions for setup, operation and analysis via the front panel LCD or via the associated sub-rack SNMP capability. In addition IMizer, an automated adjustable link calibration embedded system, enables the user to align the RF links IMD/CNR to specific linearity performances without a two-tone test. Select the desired IMD for the optical transmitter, either locally or remotely, IMizer automatically adjusts the laser drive to meet the IMD requirements.
Each low profile individual transmitter or receiver can be “hot swapped” in the sub-rack chassis maintaining the best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications. The PL7CD30T transmitter and PL7CD30R4 receiver are designed for chassis mounting.
The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required even under full sub-rack loading and full Low Noise Block (LNB) powering.
The uplink:
- supports up to a full 4dB optical budget
- has a C-Band frequency range of 3400–4200MHz
- powerful management capabilities via a front panel LCD and rack mounted SNMP
- user monitoring and control of required IMD levels
- variety of RF and optical connectors
- 1550nm and CWDM ITU Grid laser options are available for longer fiber runs and single fiber multiplexing solutions.
| RF Specification | Value |
| Frequency Range - Bandwidth | 3400–4200 MHz |
| Amplitude Response @ Unity Gain | +/- 2 |
| Noise Figure | 20 to 40 |
| Output IP3 (OIP3) | 20 |
| Input Signal Range - Total Power | -25 to -5 |
| RF Output Signal Range - Total Power | 0 to -25 |
| Optical Specifications | |
| Optical Budget / Distance 1310nm 1550nm | 8|15 |
5 customers are viewing this product
Details
Global Foxcom’s Platinum C-Band products are designed to provide full specification service up to a full 4dB optical budget at low cost.
Global Foxcom’s Platinum C-Band products are designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 4dB optical budget with the PL7CD30R4 receiver.
Utilizing Global Foxcom’s DigiRFtechnology, the user has full control of all important functions for setup, operation and analysis via the front panel LCD or via the associated sub-rack SNMP capability. In addition IMizer, an automated adjustable link calibration embedded system, enables the user to align the RF links IMD/CNR to specific linearity performances without a two-tone test. Select the desired IMD for the optical transmitter, either locally or remotely, IMizer automatically adjusts the laser drive to meet the IMD requirements.
Each low profile individual transmitter or receiver can be “hot swapped” in the sub-rack chassis maintaining the best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications. The PL7CD30T transmitter and PL7CD30R4 receiver are designed for chassis mounting.
The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required even under full sub-rack loading and full Low Noise Block (LNB) powering.
The uplink:
- supports up to a full 4dB optical budget
- has a C-Band frequency range of 3400–4200MHz
- powerful management capabilities via a front panel LCD and rack mounted SNMP
- user monitoring and control of required IMD levels
- variety of RF and optical connectors
- 1550nm and CWDM ITU Grid laser options are available for longer fiber runs and single fiber multiplexing solutions.
| RF Specification | Value |
| Frequency Range - Bandwidth | 3400–4200 MHz |
| Amplitude Response @ Unity Gain | +/- 2 |
| Noise Figure | 20 to 40 |
| Output IP3 (OIP3) | 20 |
| Input Signal Range - Total Power | -25 to -5 |
| RF Output Signal Range - Total Power | 0 to -25 |
| Optical Specifications | |
| Optical Budget / Distance 1310nm 1550nm | 8|15 |
Related Products
