Global Invacom
Global Invacom GPS 2 Way Active Splitter
This product is EoL. Emal contact@orbitalconnect.com or call +1.888.315.9545 to provide alternative product
The Global Professional GPS Active 2 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers.
The unit is configured to insert a DC voltage to the antenna via a solder feed through. Voltage required must be specified when ordering.
Both output ports incorporate a 200ohm dc load to simulate an Antenna DC current draw.
DC is loaded to both outputs.
Available in 'N', 'F', 'BNC' & 'SMA' Connector configurations
GPS splitters can also be supplied as rack mount solutions
Weight | 0.4kg |
Frequnecy Pass | L1 1575.42MHz L2 1227.60MHz |
Through Loss | 0dB +/-0.5dB |
Port to Port Isolation | +20dB |
Supply Voltage | 12 -24V DC |
Max DC Current Handling | 1 Amp |
Current Consumption | 60mA |
Dimensions | 116mm x 66mm x 26mm |
The Global Professional GPS Active 2 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers.
The unit is configured to insert a DC voltage to the antenna via a solder feed through. Voltage required must be specified when ordering.
Both output ports incorporate a 200ohm dc load to simulate an Antenna DC current draw.
DC is loaded to both outputs.
Available in 'N', 'F', 'BNC' & 'SMA' Connector configurations
GPS splitters can also be supplied as rack mount solutions
Weight | 0.4kg |
Frequnecy Pass | L1 1575.42MHz L2 1227.60MHz |
Through Loss | 0dB +/-0.5dB |
Port to Port Isolation | +20dB |
Supply Voltage | 12 -24V DC |
Max DC Current Handling | 1 Amp |
Current Consumption | 60mA |
Dimensions | 116mm x 66mm x 26mm |
Download Name | |
GPS 2 Way Active Splitter Data Sheet |