GetSat
GetSat Milli SAT W LW - Lightweight portable on-the-move satcom terminal
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Milli SAT W LW
Lightweight portable on-the-move satcom terminal
Milli SAT LW is a lightweight portable on-the-move satcom terminal
solution. It is optimal for airborne connectivity, compact installations, and for fully autonomous operation for transmit and receive high bandwidth data rates of more than 20 Mbps.
With its unique all-in-one design, Milli SAT is the leading choice for unmanned aerial vehicles (UAVs). Its optimized form, size, and weight enable it to be deployed as an integral part of the plane.
It is designed for environments that require higher bandwidth and can accommodate the enabling increase in form factor. Milli SAT is optimized for larger bandwidth requirements, with a minimal footprint.
The Milli SAT family has options for both the KA and KU bands.
Key Features
Market leader in SWap
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
All-In-One Solution
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Roll-on/ Roll-off
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Ruggedized and Compact
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
Tech Spec
RF Performance | Ka Band | Ku Band |
---|---|---|
Tx Frequency | 29-31 OR 27.5-30 GHz | 12.75-13.25 OR 13.75-14.5 GHz |
Rx Frequency | 19.2-21.2 OR 17.5-20 GHz | 10.75-12.75 OR 10.75-11.75 GHz |
Max G/T | 11.2 dB / K | 7.2 dB / K |
Polarization | RHCP/LHCP (co-pol / cross-pol) | Linear (V/H) Automatic Skew Control |
Max EIRP | 49dBW (25w BUC) | 46.1dBW (50w BUC) |
Panel Size | 50 x 13.5cm (19.7 x 5.3") | 50 x 13.5cm (19.7 x 5.3") |
Azimuth | Continues coverage over full 360° | Continues coverage over full 360° |
Elevation | -8° to 90° | -8° to 90° |
Control Technique | Combined IMU / RSSI / GPS (Optional) | Combined IMU / RSSI / GPS (Optional) |
Velocity | Azimuth >200° / Sec, Elevation > 200° / Sec | Azimuth >200° / Sec, Elevation > 200° / Sec |
Initial Acquisition Time | <30 sec | <30 sec |
Re-Acquisition time | <100ms | <100ms |
Management | Web Interface/ Open AMIP 1.16/ SW ICD | Web Interface/ Open AMIP 1.16/ SW ICD |
Power Input | 24-36v DC | 24-36v DC |
Power Consumption | 25w (Rx), 200W (25W BUC, pSAT) | 25w (Rx only), 250W (50W BUC, pSAT) |
Interfaces | RS-232, Ethernet, TX / RX | RS-232, Ethernet, TX / RX |
Weight | 10.4 Kg (23 lb) | 10.9 Kg (24 lb) |
System Size | 52 x 23cm (20.5x9") | 52 x 23cm (20.5x9") |
Milli SAT W LW
Lightweight portable on-the-move satcom terminal
Milli SAT LW is a lightweight portable on-the-move satcom terminal
solution. It is optimal for airborne connectivity, compact installations, and for fully autonomous operation for transmit and receive high bandwidth data rates of more than 20 Mbps.
With its unique all-in-one design, Milli SAT is the leading choice for unmanned aerial vehicles (UAVs). Its optimized form, size, and weight enable it to be deployed as an integral part of the plane.
It is designed for environments that require higher bandwidth and can accommodate the enabling increase in form factor. Milli SAT is optimized for larger bandwidth requirements, with a minimal footprint.
The Milli SAT family has options for both the KA and KU bands.
Key Features
Market leader in SWap
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
All-In-One Solution
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Roll-on/ Roll-off
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Ruggedized and Compact
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
Tech Spec
RF Performance | Ka Band | Ku Band |
---|---|---|
Tx Frequency | 29-31 OR 27.5-30 GHz | 12.75-13.25 OR 13.75-14.5 GHz |
Rx Frequency | 19.2-21.2 OR 17.5-20 GHz | 10.75-12.75 OR 10.75-11.75 GHz |
Max G/T | 11.2 dB / K | 7.2 dB / K |
Polarization | RHCP/LHCP (co-pol / cross-pol) | Linear (V/H) Automatic Skew Control |
Max EIRP | 49dBW (25w BUC) | 46.1dBW (50w BUC) |
Panel Size | 50 x 13.5cm (19.7 x 5.3") | 50 x 13.5cm (19.7 x 5.3") |
Azimuth | Continues coverage over full 360° | Continues coverage over full 360° |
Elevation | -8° to 90° | -8° to 90° |
Control Technique | Combined IMU / RSSI / GPS (Optional) | Combined IMU / RSSI / GPS (Optional) |
Velocity | Azimuth >200° / Sec, Elevation > 200° / Sec | Azimuth >200° / Sec, Elevation > 200° / Sec |
Initial Acquisition Time | <30 sec | <30 sec |
Re-Acquisition time | <100ms | <100ms |
Management | Web Interface/ Open AMIP 1.16/ SW ICD | Web Interface/ Open AMIP 1.16/ SW ICD |
Power Input | 24-36v DC | 24-36v DC |
Power Consumption | 25w (Rx), 200W (25W BUC, pSAT) | 25w (Rx only), 250W (50W BUC, pSAT) |
Interfaces | RS-232, Ethernet, TX / RX | RS-232, Ethernet, TX / RX |
Weight | 10.4 Kg (23 lb) | 10.9 Kg (24 lb) |
System Size | 52 x 23cm (20.5x9") | 52 x 23cm (20.5x9") |