

Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
MILLI SAT EX lightweight satcom solution is tailored to meet C-130 Hercule’s mission requirements. Designed for Ka-band, Milli SAT EX offers unmatched performance in an extremely compact, small package of 22kg weight, including a Multi-Purpose Shoulder Panel System. Optimized for voice, video, and data transmission.
MILLI SAT EX supports Roll-On / Roll-Off (RORO) C-130 airborne applications without requiring any modification to the aircraft. The unit’s radome does not obstruct existing aircraft surfaces, other instruments, or antennas while providing high bandwidth data throughput exceeding 30 Mbps with HTS satellites.
MILLI SAT EX supports mil-Ka band and is compatible with Inmarsat’s GX network. Fully FAA-compliant and designed to operate on all C-130 variants.
A turn-key solution including a dual-modem integrated transit case that accesses various Ka-band networks simultaneously.
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
RF Performance | Ka Band | |
---|---|---|
Tx Frequency | 29-31GHz OR 27.5 - 30GHz | |
Rx Frequency | 19.2-21.2GHz OR 17.5 - 20GHz | |
Max G/T | 12 dB / K | |
Polarization | RHCP/LHCP (co-pol / cross-pol) | |
EIRP | 48.5 dBW | |
Panel Size | 20 x 48 cm (7.9 x 18.8’') | |
Azimuth | Continues coverage over full 360° | |
Elevation | -6° to 90° | |
Control Technique | Combined IMU / RSSI / GPS (Optional) | |
Velocity | Azimuth >200° / Sec, Elevation > 200° / Sec | |
Initial Acquisition Time | <30 sec | |
Re-Acquisition time | <100ms | |
Management | Web Interface/ Open AMIP 1.16/ SW ICD | |
Power Input | 22 - 56v DC | |
Power Consumption | Rx Only ~ 25 Watts | TOTAL – 150 Watts (12W Buc PSAT) |
Interfaces | GPS, RS-232, Ethernet, TX/RX, Other | |
Weight | 22 Kg (48lb) including Radome and Hatch Mount | |
System Size | 38 x 65 cm (15 x 26") |
MILLI SAT EX lightweight satcom solution is tailored to meet C-130 Hercule’s mission requirements. Designed for Ka-band, Milli SAT EX offers unmatched performance in an extremely compact, small package of 22kg weight, including a Multi-Purpose Shoulder Panel System. Optimized for voice, video, and data transmission.
MILLI SAT EX supports Roll-On / Roll-Off (RORO) C-130 airborne applications without requiring any modification to the aircraft. The unit’s radome does not obstruct existing aircraft surfaces, other instruments, or antennas while providing high bandwidth data throughput exceeding 30 Mbps with HTS satellites.
MILLI SAT EX supports mil-Ka band and is compatible with Inmarsat’s GX network. Fully FAA-compliant and designed to operate on all C-130 variants.
A turn-key solution including a dual-modem integrated transit case that accesses various Ka-band networks simultaneously.
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
RF Performance | Ka Band | |
---|---|---|
Tx Frequency | 29-31GHz OR 27.5 - 30GHz | |
Rx Frequency | 19.2-21.2GHz OR 17.5 - 20GHz | |
Max G/T | 12 dB / K | |
Polarization | RHCP/LHCP (co-pol / cross-pol) | |
EIRP | 48.5 dBW | |
Panel Size | 20 x 48 cm (7.9 x 18.8’') | |
Azimuth | Continues coverage over full 360° | |
Elevation | -6° to 90° | |
Control Technique | Combined IMU / RSSI / GPS (Optional) | |
Velocity | Azimuth >200° / Sec, Elevation > 200° / Sec | |
Initial Acquisition Time | <30 sec | |
Re-Acquisition time | <100ms | |
Management | Web Interface/ Open AMIP 1.16/ SW ICD | |
Power Input | 22 - 56v DC | |
Power Consumption | Rx Only ~ 25 Watts | TOTAL – 150 Watts (12W Buc PSAT) |
Interfaces | GPS, RS-232, Ethernet, TX/RX, Other | |
Weight | 22 Kg (48lb) including Radome and Hatch Mount | |
System Size | 38 x 65 cm (15 x 26") |
Download Name | |
Milli SAT EX Data Sheet |