Zoom the image with the mouse
ETL Systems
ETL Systems Stingray Genus S-band Transmit Fibre Converter Module
Product Code:
SRY-G1S-TS6-161
Availability:
YES
Weight:
0.50 KGS
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Model SRY-G1S-TS6-161, StingRay Genus S-band Transmit Fibre converter module is designed to provide compact fibre links up to 10km.
The TRANSMIT module converts an S-band (500-3150 MHz) signal to optical and can also provide LNB power 13/18VDC, 22kHz tone up to 500mA.
When fitted with a 10 MHz distributing module the TX module can inject an external or internal 10 MHz tone onto the L-band feed.
The module is designed to be housed in the Genus 1U chassis and is compatible with ETL's receive module SRY-G1S-RS6-162.
| StingRay TX & RX Module - RF Parameters | |||
| Model Numbers | SRY-G1S-TS6-161 | SRY-G1S-RS6-162 | |
| Frequency Range | 500-3150 MHz | ||
| Flatness (dB) | 850 to 2150 MHz | ±1.5 dB, Fixed gain mode, input -10 dBm, output -10 dBm. | |
| 500 to 3150 MHz | ±2.0 dB, Fixed gain mode, input -10 dBm, output -10 dBm. | ||
| any 36MHz | ±0.25 dB, Fixed gain mode, input -10 dBm, output -10 dBm. | ||
| Return Loss (dB) | 50 ohm SMA | 18 dB typ., 14 dB min | 18 dB typ., 14 dB min |
| 50 ohm BNC | 18 dB typ., 14 dB min | 18 dB typ., 14 dB min | |
| 75ohm BNC | 14 dB typ., 10 dB min (8 dB min >2450 MHz) | 16 dB typ., 12 dB min (8 dB min >2450 MHz) | |
| 75 ohm F-type | 14 dB typ., 10 dB min (8 dB min >2450 MHz) | 16 dB typ., 12 dB min (8 dB min >2450 MHz) | |
| Gain Setting Modes | Manual Gain Control (MGC) Automatic Gain Control (AGC) Fixed Gain (FG) |
||
| Manual Gain Range | 60dB in 0.5dB steps | ||
| OIP3 | 850 to 2150MHz | Typical 23 dBm, Worst Case 20 dBm Test condition: 1m fibre, 10dB gain, -23 dBm tones |
|
| 500 to 3150MHz | Typical 20 dBm, Worst Case 17 dBm Test condition: 1m fibre, 10dB gain, -23 dBm tones |
||
| CNR (in any 36 MHz) | Typical –50 dB, Worst Case -45 dB Test condition: 1m fibre, -10 dBm RF i/p power, -10 dBm RF o/p total power. |
||
| Noise Figure | Typical 9 dB, Worst Case 12 dB Test condition: 1m fibre, -50 dB RF i/p power, -10 dBm o/p power |
||
| Group Delay Variation | 2ns over full band. 1ns over any 36MHz. | ||
| SFDR | 850 to 2150MHz | 107 dB/Hz2/3 typ., 102 dB/Hz2/3 min Test condition: 1m fibre, 10dB gain, -23 dBm tones |
|
| 500 to 3150MHz | 103 dB/Hz2/3 typ., 98 dB/Hz2/3 min Test condition: 1m fibre, 10dB gain, -23 dBm tones |
||
| RF Signal Range | Input: -70 to -10dBm (total power) Operational i/p range (Note that all Specifications are only ‘typical’ between -60 & -70dBm unless otherwise detailed). |
Output: -70dBm to -10dBm (total power) o/p range available under all i/p conditions. (Note that all Specifications are only ‘typical’ between - 60 & -70dBm unless otherwise detailed). | |
| Max RF input | 16dBm total power. Damage level, NOT operational. | - | |
| 10 MHz level at output | -10 to +10 dBm. User settable level via the chassis. Accuracy ±1dB | 10 to +10 dBm. User settable level via the chassis. Accuracy ±1dB | |
| 10MHz isolation | -40 dB. Between adjacent modules in same chassis | -40 dB. Between adjacent modules in same chassis | |
| Laser Type | DFB. Optical isolator for improved performance | ||
| Optical Wavelength | 1310 ± 10 nm | 1100 to 1650nm. Optimised for 1310nm and 1550 nm | |
| Optical Power | Output: 4.5 ±2.5 dBm. 3.8 dBm typical | Input: 0 to 4.5dBm. Max 10 dBm | |
| Optical Connectors | FC/APC , SC/APC Single mode fibre. Use angle polish connectors only |
||
| Module Dimensions | 19mm x 38mm x 253mm. 0.2kg. Genus 1U series mountable. | ||
| Power Consumption | 15W Typical. With 18V 500 mA LNB Power. | 4 W Typical | |
| LNB Power | 18/13V ±5 %, 500 mA max | - | |
| Module Swap | Hot swap | ||
| MTBF | >200,000 hours. | ||
| LNB Power | |||
| Number of Single modules fitted | Total Power Available for LNB powering @ 18V |
||
| 16 | 115 W | ||
| 14 | 120 W | ||
| ≤ 13 | Limited by module specifications | ||
| Spec Version | 1,5 | 1,5 | |
The StingRay RF over Fibre module is available in a variety of RF connector and optical connector types. See below for related modules & chassis.
5 customers are viewing this product
Details
Model SRY-G1S-TS6-161, StingRay Genus S-band Transmit Fibre converter module is designed to provide compact fibre links up to 10km.
The TRANSMIT module converts an S-band (500-3150 MHz) signal to optical and can also provide LNB power 13/18VDC, 22kHz tone up to 500mA.
When fitted with a 10 MHz distributing module the TX module can inject an external or internal 10 MHz tone onto the L-band feed.
The module is designed to be housed in the Genus 1U chassis and is compatible with ETL's receive module SRY-G1S-RS6-162.
| StingRay TX & RX Module - RF Parameters | |||
| Model Numbers | SRY-G1S-TS6-161 | SRY-G1S-RS6-162 | |
| Frequency Range | 500-3150 MHz | ||
| Flatness (dB) | 850 to 2150 MHz | ±1.5 dB, Fixed gain mode, input -10 dBm, output -10 dBm. | |
| 500 to 3150 MHz | ±2.0 dB, Fixed gain mode, input -10 dBm, output -10 dBm. | ||
| any 36MHz | ±0.25 dB, Fixed gain mode, input -10 dBm, output -10 dBm. | ||
| Return Loss (dB) | 50 ohm SMA | 18 dB typ., 14 dB min | 18 dB typ., 14 dB min |
| 50 ohm BNC | 18 dB typ., 14 dB min | 18 dB typ., 14 dB min | |
| 75ohm BNC | 14 dB typ., 10 dB min (8 dB min >2450 MHz) | 16 dB typ., 12 dB min (8 dB min >2450 MHz) | |
| 75 ohm F-type | 14 dB typ., 10 dB min (8 dB min >2450 MHz) | 16 dB typ., 12 dB min (8 dB min >2450 MHz) | |
| Gain Setting Modes | Manual Gain Control (MGC) Automatic Gain Control (AGC) Fixed Gain (FG) |
||
| Manual Gain Range | 60dB in 0.5dB steps | ||
| OIP3 | 850 to 2150MHz | Typical 23 dBm, Worst Case 20 dBm Test condition: 1m fibre, 10dB gain, -23 dBm tones |
|
| 500 to 3150MHz | Typical 20 dBm, Worst Case 17 dBm Test condition: 1m fibre, 10dB gain, -23 dBm tones |
||
| CNR (in any 36 MHz) | Typical –50 dB, Worst Case -45 dB Test condition: 1m fibre, -10 dBm RF i/p power, -10 dBm RF o/p total power. |
||
| Noise Figure | Typical 9 dB, Worst Case 12 dB Test condition: 1m fibre, -50 dB RF i/p power, -10 dBm o/p power |
||
| Group Delay Variation | 2ns over full band. 1ns over any 36MHz. | ||
| SFDR | 850 to 2150MHz | 107 dB/Hz2/3 typ., 102 dB/Hz2/3 min Test condition: 1m fibre, 10dB gain, -23 dBm tones |
|
| 500 to 3150MHz | 103 dB/Hz2/3 typ., 98 dB/Hz2/3 min Test condition: 1m fibre, 10dB gain, -23 dBm tones |
||
| RF Signal Range | Input: -70 to -10dBm (total power) Operational i/p range (Note that all Specifications are only ‘typical’ between -60 & -70dBm unless otherwise detailed). |
Output: -70dBm to -10dBm (total power) o/p range available under all i/p conditions. (Note that all Specifications are only ‘typical’ between - 60 & -70dBm unless otherwise detailed). | |
| Max RF input | 16dBm total power. Damage level, NOT operational. | - | |
| 10 MHz level at output | -10 to +10 dBm. User settable level via the chassis. Accuracy ±1dB | 10 to +10 dBm. User settable level via the chassis. Accuracy ±1dB | |
| 10MHz isolation | -40 dB. Between adjacent modules in same chassis | -40 dB. Between adjacent modules in same chassis | |
| Laser Type | DFB. Optical isolator for improved performance | ||
| Optical Wavelength | 1310 ± 10 nm | 1100 to 1650nm. Optimised for 1310nm and 1550 nm | |
| Optical Power | Output: 4.5 ±2.5 dBm. 3.8 dBm typical | Input: 0 to 4.5dBm. Max 10 dBm | |
| Optical Connectors | FC/APC , SC/APC Single mode fibre. Use angle polish connectors only |
||
| Module Dimensions | 19mm x 38mm x 253mm. 0.2kg. Genus 1U series mountable. | ||
| Power Consumption | 15W Typical. With 18V 500 mA LNB Power. | 4 W Typical | |
| LNB Power | 18/13V ±5 %, 500 mA max | - | |
| Module Swap | Hot swap | ||
| MTBF | >200,000 hours. | ||
| LNB Power | |||
| Number of Single modules fitted | Total Power Available for LNB powering @ 18V |
||
| 16 | 115 W | ||
| 14 | 120 W | ||
| ≤ 13 | Limited by module specifications | ||
| Spec Version | 1,5 | 1,5 | |
The StingRay RF over Fibre module is available in a variety of RF connector and optical connector types. See below for related modules & chassis.
Related Products
