Zoom the image with the mouse
ETL Systems
ETL Systems DIV-G3-S6-401 Genus L-band Splitter Active 4-way With Redundant Amps Variable Gain / Slope, RF Detection & LNB Powering
Product Code:
DIV-G3-S6-401
Condition:
New
Availability:
YES
Weight:
15.00 KGS
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Model DIV-G3-S6-401, is an L-band (850-3150MHz) active 4-way splitter module with 0-28 dB variable gain and 0-10 dB variable slope compensation. It also benefits from dual redundant amplifiers for reliability, 13/18 V DC with 22kHz on/off LNB powering and RF detection to monitor signal levels.
It is designed to be housed in a GNS-103-3U Genus chassis, which holds up to 17 RF modules. The chassis benefits from dual redundant hot-swap power supplies and field serviceable & replaceable RF modules, HMI and CPU module.
The unit provides Secure Communications with SNMPv3, HTTPS. Remote control and monitoring is via RJ45 Ethernet port with SNMP and web browser interface.
The Genus chassis can hold a mix of RF modules including splitters and combiners providing flexible signal management in a compact housing.
The chassis is 3U high x 500mm deep x 19" wide shelf and is available in the impedances and connector types shown below.
| Connector Type | Model No. |
|---|---|
|
50 ohm BNC
|
DIV-G3-S6-401-B5B5
|
|
75 ohm BNC
|
DIV-G3-S6-401-B7B7
|
|
50 ohm SMA
|
DIV-G3-S6-401-S5S5
|
|
75 ohm F-type
|
DIV-G3-S6-401-F7F7
|
| Splitter Module - Technical specifications and operating parameters | |||||
| Function | 4-way Active Splitter | ||||
| Module Slots Used | 1 | ||||
| Frequency Range | 850-3150 MHz (Extended L-band) | ||||
| Gain | Minimum | 0 ± 2 dB | |||
| Maximum | 28 ± 2 dB | ||||
| Gain Flatness | 850 to 2450 MHz | ± 1.0 dB | |||
| 850 to 3150 MHz | ± 2.0 dB | ||||
| Any 36 MHz | ± 0.25 dB | ||||
| Gain Steps | 0.25 ± 0.15 dB Monotonic Gain Control | ||||
| Slope Control Range | 0 to 10 dB Pivot Point at 3150 MHz | ||||
| Slope Control Steps | 1 ± 0.25 dB | ||||
| RF Connectors & Impedances | 50Ω SMA | 50Ω BNC | 75Ω BNC | 75Ω F-type | |
| Input Return Loss | Typical | 18 dB | 18 dB | 16 dB | 16 dB |
| Minimum | 12 dB | 12 dB | 10 dB | 10 dB | |
| Output Return Loss | Typical | 18 dB | 18 dB | 16 dB | 16 dB |
| Minimum | 14 dB | 14 dB | 12 dB | 12 dB | |
| Reverse Gain | < -60 dB typical | ||||
| Noise Figure | Typical | 9 dB At maximum gain & 0 dB slope setting | |||
| Maximum | 11 dB At maximum gain & 0 dB slope setting | ||||
| 1dB GCP | Typical | 7 dBm At maximum gain & 0 dB slope setting | |||
| Minimum | 5 dBm At maximum gain & 0 dB slope setting | ||||
| OIP3 | Typical | 19 dBm At maximum gain & 0 dB slope setting | |||
| Minimum | 16 dBm At maximum gain & 0 dB slope setting | ||||
| OIP2 | Typical | 29 dBm At maximum gain & 0 dB slope setting | |||
| Minimum | 26 dBm At maximum gain & 0 dB slope setting | ||||
| In band, signal dependent spurii | <-85 dBm max Very low level spurii from CPU clock, switch mode PSU and other control electronics inside the chassis. | ||||
| Input RF Detection | 0 to –50 dBm | ||||
| Amplifier Redundancy | 1:1 Auto switch over from main to standby is based on current sensing. Standby amp chain is cold standby redundant. | ||||
| MTBF | >150,000 hrs MTBF of each amp module. These are hot swap. | ||||
| Maximum Input Level | +20 dBm For no damage. None operational. | ||||
| Control Method | Via Chassis Local and remote as provided by selected chassis | ||||
| LNB Power | 450 mA max per card Maximum allowed power per chassis shall NOT exceed 100 W | ||||
| LNB Control | 13/18 V DC with 22kHz on/off | ||||
| DC Coupling | All RF Output Ports DC blocked | ||||
| Temperature | Operating: 0 to 50°C Storage: -20°C to +75°C (equipment not powered) | ||||
| Location / Humidity / Altitude | Location: Indoor only Humidity: 20 to 90% non-condensing (relative) Altitude: 10,000ft/3000m AMSL (Above Mean Sea Level) | ||||
5 customers are viewing this product
Details
Model DIV-G3-S6-401, is an L-band (850-3150MHz) active 4-way splitter module with 0-28 dB variable gain and 0-10 dB variable slope compensation. It also benefits from dual redundant amplifiers for reliability, 13/18 V DC with 22kHz on/off LNB powering and RF detection to monitor signal levels.
It is designed to be housed in a GNS-103-3U Genus chassis, which holds up to 17 RF modules. The chassis benefits from dual redundant hot-swap power supplies and field serviceable & replaceable RF modules, HMI and CPU module.
The unit provides Secure Communications with SNMPv3, HTTPS. Remote control and monitoring is via RJ45 Ethernet port with SNMP and web browser interface.
The Genus chassis can hold a mix of RF modules including splitters and combiners providing flexible signal management in a compact housing.
The chassis is 3U high x 500mm deep x 19" wide shelf and is available in the impedances and connector types shown below.
| Connector Type | Model No. |
|---|---|
|
50 ohm BNC
|
DIV-G3-S6-401-B5B5
|
|
75 ohm BNC
|
DIV-G3-S6-401-B7B7
|
|
50 ohm SMA
|
DIV-G3-S6-401-S5S5
|
|
75 ohm F-type
|
DIV-G3-S6-401-F7F7
|
| Splitter Module - Technical specifications and operating parameters | |||||
| Function | 4-way Active Splitter | ||||
| Module Slots Used | 1 | ||||
| Frequency Range | 850-3150 MHz (Extended L-band) | ||||
| Gain | Minimum | 0 ± 2 dB | |||
| Maximum | 28 ± 2 dB | ||||
| Gain Flatness | 850 to 2450 MHz | ± 1.0 dB | |||
| 850 to 3150 MHz | ± 2.0 dB | ||||
| Any 36 MHz | ± 0.25 dB | ||||
| Gain Steps | 0.25 ± 0.15 dB Monotonic Gain Control | ||||
| Slope Control Range | 0 to 10 dB Pivot Point at 3150 MHz | ||||
| Slope Control Steps | 1 ± 0.25 dB | ||||
| RF Connectors & Impedances | 50Ω SMA | 50Ω BNC | 75Ω BNC | 75Ω F-type | |
| Input Return Loss | Typical | 18 dB | 18 dB | 16 dB | 16 dB |
| Minimum | 12 dB | 12 dB | 10 dB | 10 dB | |
| Output Return Loss | Typical | 18 dB | 18 dB | 16 dB | 16 dB |
| Minimum | 14 dB | 14 dB | 12 dB | 12 dB | |
| Reverse Gain | < -60 dB typical | ||||
| Noise Figure | Typical | 9 dB At maximum gain & 0 dB slope setting | |||
| Maximum | 11 dB At maximum gain & 0 dB slope setting | ||||
| 1dB GCP | Typical | 7 dBm At maximum gain & 0 dB slope setting | |||
| Minimum | 5 dBm At maximum gain & 0 dB slope setting | ||||
| OIP3 | Typical | 19 dBm At maximum gain & 0 dB slope setting | |||
| Minimum | 16 dBm At maximum gain & 0 dB slope setting | ||||
| OIP2 | Typical | 29 dBm At maximum gain & 0 dB slope setting | |||
| Minimum | 26 dBm At maximum gain & 0 dB slope setting | ||||
| In band, signal dependent spurii | <-85 dBm max Very low level spurii from CPU clock, switch mode PSU and other control electronics inside the chassis. | ||||
| Input RF Detection | 0 to –50 dBm | ||||
| Amplifier Redundancy | 1:1 Auto switch over from main to standby is based on current sensing. Standby amp chain is cold standby redundant. | ||||
| MTBF | >150,000 hrs MTBF of each amp module. These are hot swap. | ||||
| Maximum Input Level | +20 dBm For no damage. None operational. | ||||
| Control Method | Via Chassis Local and remote as provided by selected chassis | ||||
| LNB Power | 450 mA max per card Maximum allowed power per chassis shall NOT exceed 100 W | ||||
| LNB Control | 13/18 V DC with 22kHz on/off | ||||
| DC Coupling | All RF Output Ports DC blocked | ||||
| Temperature | Operating: 0 to 50°C Storage: -20°C to +75°C (equipment not powered) | ||||
| Location / Humidity / Altitude | Location: Indoor only Humidity: 20 to 90% non-condensing (relative) Altitude: 10,000ft/3000m AMSL (Above Mean Sea Level) | ||||
Download
| Download Name | |
| GENUS L-BAND SPLITTER ACTIVE 4-WAY Data Sheet | |
Related Products
