Zoom the image with the mouse
ETL Systems
ETL Systems COM02L1A-2281 L-Band Active Combiner 2-Way - DC Block + 10MHz Pass
Product Code:
COM02L1A-2281
Weight:
1.00 KGS
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
L-band Combiner - Active 2-way with unity gain and flat frequency response. 10MHz/DC pass.
Requires 8-18V powering on RF line.
| RF Parameters | ||||||
| COM02L1A-2281-XXXX | S5S5 | N5N5 | B5B5 | B7B7 | F7F7 | |
| Frequency Range | 850 - 2150 MHz | |||||
| RF Connectors | 50Ω SMA | 50Ω N-Type | 50Ω BNC | 75Ω BNC | 75Ω F-Type | |
| Mean Gain (dB) | 0 ± 0.5 | 0 ± 0.5 | 0 ± 0.6 | 0 ± 0.75 | 0 ± 0.75 | |
| Flatness ± (dB) | 0,4 | 0,4 | 0,4 | 1,0 | 1,0 | |
| Input Return Loss (dB) | Typ. Min |
20 | 20 | 20 | 12 | 12 |
| 14 | 14 | 14 | 8 | 8 | ||
| Output Return Loss (dB) | Typ. Min | 20 | 20 | 20 | 12 | 12 |
| 14 | 14 | 14 | 8 | 8 | ||
| Output P1dB GCP** (dBm) | Typ. Min | 12 | 12 | 12 | 12 | 12 |
| 10 | 10 | 10 | 10 | 10 | ||
| Isolation (dB) | Typ. | 18 | 18 | 18 | 18 | 18 |
| Output IP3(dBm) | Typ. | 21 | 21 | 21 | 21 | 21 |
| Noise Figure (dB) | Typ. | 13 | 13 | 13 | 13 | 13 |
| Amplitude Balance (dB) | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.5 | ≤0.5 | |
| Phase Balance (Φ) | ≤3º | ≤3º | ≤6º | ≤6º | ≤6º | |
| 10MHz Rejection is 20dB* *To ports which are applicable **GCP (Gain Compression Point) |
||||||
| Max Operating Parameters | |
| Input RF Power | +21 dBm (125mW) |
| DC Voltage | 35V on any RF port |
| DC Current | 2A Max Total Current on any RF Ports |
| DC Consumption | 100mA Max, 80mA typical |
| Environmental | |
| Operating Temperature | 0˚C to +45˚C |
| Storage Temperature | -20˚C to +75˚C |
| Location | Indoor use Only |
| Humidity Max | 85% non-condensing |
| Altitude Max | 10,000 feet |
5 customers are viewing this product
Details
L-band Combiner - Active 2-way with unity gain and flat frequency response. 10MHz/DC pass.
Requires 8-18V powering on RF line.
| RF Parameters | ||||||
| COM02L1A-2281-XXXX | S5S5 | N5N5 | B5B5 | B7B7 | F7F7 | |
| Frequency Range | 850 - 2150 MHz | |||||
| RF Connectors | 50Ω SMA | 50Ω N-Type | 50Ω BNC | 75Ω BNC | 75Ω F-Type | |
| Mean Gain (dB) | 0 ± 0.5 | 0 ± 0.5 | 0 ± 0.6 | 0 ± 0.75 | 0 ± 0.75 | |
| Flatness ± (dB) | 0,4 | 0,4 | 0,4 | 1,0 | 1,0 | |
| Input Return Loss (dB) | Typ. Min |
20 | 20 | 20 | 12 | 12 |
| 14 | 14 | 14 | 8 | 8 | ||
| Output Return Loss (dB) | Typ. Min | 20 | 20 | 20 | 12 | 12 |
| 14 | 14 | 14 | 8 | 8 | ||
| Output P1dB GCP** (dBm) | Typ. Min | 12 | 12 | 12 | 12 | 12 |
| 10 | 10 | 10 | 10 | 10 | ||
| Isolation (dB) | Typ. | 18 | 18 | 18 | 18 | 18 |
| Output IP3(dBm) | Typ. | 21 | 21 | 21 | 21 | 21 |
| Noise Figure (dB) | Typ. | 13 | 13 | 13 | 13 | 13 |
| Amplitude Balance (dB) | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.5 | ≤0.5 | |
| Phase Balance (Φ) | ≤3º | ≤3º | ≤6º | ≤6º | ≤6º | |
| 10MHz Rejection is 20dB* *To ports which are applicable **GCP (Gain Compression Point) |
||||||
| Max Operating Parameters | |
| Input RF Power | +21 dBm (125mW) |
| DC Voltage | 35V on any RF port |
| DC Current | 2A Max Total Current on any RF Ports |
| DC Consumption | 100mA Max, 80mA typical |
| Environmental | |
| Operating Temperature | 0˚C to +45˚C |
| Storage Temperature | -20˚C to +75˚C |
| Location | Indoor use Only |
| Humidity Max | 85% non-condensing |
| Altitude Max | 10,000 feet |
Related Products
