Zoom the image with the mouse
ETL Systems
ETL Systems Alto SHF 18 GHz 1+1 Redundant Amplifier Chassis with hot swap fan & PSU's, 50 ohm SMA - ALT-C402-2U-S5S5
Product Code:
ALT-C402-2U-S5S5
Condition:
New
Availability:
YES
Weight:
7.00 KGS
Width:
48.26
(cm)
Height:
8.80
(cm)
Depth:
45.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Model ALT-C402-2U-x5x5, Ku-band 1:1 Redundant ALTO Amplifier chassis.
This model benefits from LOCAL CONTROL via push buttons and display and REMOTE CONTROL via ETHERNET port with SNMP and web browser interface. It benefits from forced air cooling trays and dual redundant power supplies for reliability in service.
2U high x 450mm deep x 19" wide shelf with 50Ω impedance connectors (SMA).
Available module types are specified within the datasheet.
Typical Applications
- Front end RF chain
- Providing cable loss compensation for teleports
- TVRO and head-ends.
The success of ETL's Alto Amplifiers means that the range of different modules/requirements is growing very fast. Rather than proliferating new chassis model numbers, we have updated our model numbering scheme to split chassis (many of which are common) and modules.
| Chassis - Specification | |||||||||||
| Model Numbers | ALT-C402-2U | ||||||||||
| Dimensions | 2U high x 450mm deep x 19” wide | ||||||||||
| Capacity | 2 modules: 1:1 redundancy | ||||||||||
| Stand-by amplifier options | Hot or cold standby options - operator selectable | ||||||||||
| Cooling | Convection cooled, hot-swap fan tray | ||||||||||
| Impedance & RF Connectors | 50 Ω SMA | ||||||||||
| Weight / Colour | <10 kg (fully populated) | White 00-E-55 semi-gloss | |||||||||
| PSU | Hot-swap, (from front panel) dual redundant, Diode OR | ||||||||||
| PSU Power | 85-264Vac 50/60 Hz, 130W | ||||||||||
| AC Consumption | < 100W | ||||||||||
| Local control & monitoring | LCD and keypad - via front panel | ||||||||||
| Remote control & monitoring | Ethernet via RJ45, 10BaseT/100BaseTx, ETL TCP/IP protocol, SNMP & web browser interface / 9 pin D-type port for dry contact alarms , RS232 & RS485 | ||||||||||
| Monitoring | Amplifier supply voltages: supply from PSU to each amplifier module is continuously monitored | Temperature monitoring: each amplifier module, CPU board & equipment chassis | PSU status: each PSU is individually monitored & reported | Fan tray: triggered by temperature monitoring system. Hot-swap tray with multiple fans. When ON, the fan speed is monitored & reported | |||||||
| MTBF | Amplifier Module: >150,000 hours | Chassis: > 200,000 hours (excludes coax switches & hot-swap modules) | Coax switches: >1,000,000 cycles | ||||||||
| Temperature / Humidity | Operating: 0 to 45 °C | Storage: -20 to +75 °C Indoor use only | 20% to 90% non-condensing Relative humidity | ||||||||
| Maximum input level | +20 dBm For no damage | ||||||||||
| Amplifier Module Options - RF Parameters | |||||||||||
| Amp Module Model Numbers | ALT-R-KB-200 | ALT-R-K0-200 | ALT-R-KB1-200 | ALT-R-KB2-200 | ALT-R-KB3-300 | ALT-R-KB4-200 | |||||
| Frequency Range (GHz) | 2.0 - 18 | 6.0 - 18 | 2.0 - 8.0 | 2.0 - 10 | 2.0 - 13 | 2.0 - 16 | |||||
| Gain (dB) | 21 ± 3.25 | 21 ± 2.75 | 22 ± 2.25 | 22 ± 2.50 | 22 ± 2.50 | 21 ± 2.75 | |||||
| Flatness (dB) | Full band | ± 3.35 | ± 2.5 | ± 1.65 | ± 1.85 | ± 1.85 | ± 2.10 | ||||
| Over 36MHz | ± 0.35 | ± 0.35 | ± 0.30 | ± 0.30 | ± 0.35 | ± 0.35 | |||||
| Any 72MHz | ± 0.65 | ± 0.65 | ± 0.50 | ± 0.50 | ± 0.55 | ± 0.60 | |||||
| Input Return Loss (dB) | Typical | 16 | 16 | 18 | 18 | 16 | 16 | ||||
| Minimum | 8 | 8 | 10 | 10 | 9 | 9 | |||||
| Output Return Loss (dB) | Typical | 16 | 16 | 18 | 18 | 16 | 16 | ||||
| Minimum | 8 | 8 | 10 | 10 | 9 | 9 | |||||
| Isolation | Typical | 80 | 80 | 80 | 80 | 80 | 80 | ||||
| Minimum | 60 | 60 | 65 | 65 | 65 | 60 | |||||
| Reverse Gain (dB) | -40 | -40 | -40 | -40 | -40 | -40 | |||||
| Noise Figure (dB) | Typical | 5,0 | 5,0 | 4,5 | 4,5 | 4,5 | 5,0 | ||||
| Maximum | 6,5 | 6,5 | 6,0 | 6,0 | 6,0 | 6,5 | |||||
| 1dB GCP (dB) output power |
Typical | 21,0 | 21,5 | 22,5 | 22,5 | 22,5 | 22,5 | ||||
| Minimum | 18,5 | 19 | 19,0 | 19,0 | 19,0 | 19,0 | |||||
| OIP3 | Typical | 25 | 25 | 29 | 29 | 26 | 25 | ||||
5 customers are viewing this product
Details
Model ALT-C402-2U-x5x5, Ku-band 1:1 Redundant ALTO Amplifier chassis.
This model benefits from LOCAL CONTROL via push buttons and display and REMOTE CONTROL via ETHERNET port with SNMP and web browser interface. It benefits from forced air cooling trays and dual redundant power supplies for reliability in service.
2U high x 450mm deep x 19" wide shelf with 50Ω impedance connectors (SMA).
Available module types are specified within the datasheet.
Typical Applications
- Front end RF chain
- Providing cable loss compensation for teleports
- TVRO and head-ends.
The success of ETL's Alto Amplifiers means that the range of different modules/requirements is growing very fast. Rather than proliferating new chassis model numbers, we have updated our model numbering scheme to split chassis (many of which are common) and modules.
| Chassis - Specification | |||||||||||
| Model Numbers | ALT-C402-2U | ||||||||||
| Dimensions | 2U high x 450mm deep x 19” wide | ||||||||||
| Capacity | 2 modules: 1:1 redundancy | ||||||||||
| Stand-by amplifier options | Hot or cold standby options - operator selectable | ||||||||||
| Cooling | Convection cooled, hot-swap fan tray | ||||||||||
| Impedance & RF Connectors | 50 Ω SMA | ||||||||||
| Weight / Colour | <10 kg (fully populated) | White 00-E-55 semi-gloss | |||||||||
| PSU | Hot-swap, (from front panel) dual redundant, Diode OR | ||||||||||
| PSU Power | 85-264Vac 50/60 Hz, 130W | ||||||||||
| AC Consumption | < 100W | ||||||||||
| Local control & monitoring | LCD and keypad - via front panel | ||||||||||
| Remote control & monitoring | Ethernet via RJ45, 10BaseT/100BaseTx, ETL TCP/IP protocol, SNMP & web browser interface / 9 pin D-type port for dry contact alarms , RS232 & RS485 | ||||||||||
| Monitoring | Amplifier supply voltages: supply from PSU to each amplifier module is continuously monitored | Temperature monitoring: each amplifier module, CPU board & equipment chassis | PSU status: each PSU is individually monitored & reported | Fan tray: triggered by temperature monitoring system. Hot-swap tray with multiple fans. When ON, the fan speed is monitored & reported | |||||||
| MTBF | Amplifier Module: >150,000 hours | Chassis: > 200,000 hours (excludes coax switches & hot-swap modules) | Coax switches: >1,000,000 cycles | ||||||||
| Temperature / Humidity | Operating: 0 to 45 °C | Storage: -20 to +75 °C Indoor use only | 20% to 90% non-condensing Relative humidity | ||||||||
| Maximum input level | +20 dBm For no damage | ||||||||||
| Amplifier Module Options - RF Parameters | |||||||||||
| Amp Module Model Numbers | ALT-R-KB-200 | ALT-R-K0-200 | ALT-R-KB1-200 | ALT-R-KB2-200 | ALT-R-KB3-300 | ALT-R-KB4-200 | |||||
| Frequency Range (GHz) | 2.0 - 18 | 6.0 - 18 | 2.0 - 8.0 | 2.0 - 10 | 2.0 - 13 | 2.0 - 16 | |||||
| Gain (dB) | 21 ± 3.25 | 21 ± 2.75 | 22 ± 2.25 | 22 ± 2.50 | 22 ± 2.50 | 21 ± 2.75 | |||||
| Flatness (dB) | Full band | ± 3.35 | ± 2.5 | ± 1.65 | ± 1.85 | ± 1.85 | ± 2.10 | ||||
| Over 36MHz | ± 0.35 | ± 0.35 | ± 0.30 | ± 0.30 | ± 0.35 | ± 0.35 | |||||
| Any 72MHz | ± 0.65 | ± 0.65 | ± 0.50 | ± 0.50 | ± 0.55 | ± 0.60 | |||||
| Input Return Loss (dB) | Typical | 16 | 16 | 18 | 18 | 16 | 16 | ||||
| Minimum | 8 | 8 | 10 | 10 | 9 | 9 | |||||
| Output Return Loss (dB) | Typical | 16 | 16 | 18 | 18 | 16 | 16 | ||||
| Minimum | 8 | 8 | 10 | 10 | 9 | 9 | |||||
| Isolation | Typical | 80 | 80 | 80 | 80 | 80 | 80 | ||||
| Minimum | 60 | 60 | 65 | 65 | 65 | 60 | |||||
| Reverse Gain (dB) | -40 | -40 | -40 | -40 | -40 | -40 | |||||
| Noise Figure (dB) | Typical | 5,0 | 5,0 | 4,5 | 4,5 | 4,5 | 5,0 | ||||
| Maximum | 6,5 | 6,5 | 6,0 | 6,0 | 6,0 | 6,5 | |||||
| 1dB GCP (dB) output power |
Typical | 21,0 | 21,5 | 22,5 | 22,5 | 22,5 | 22,5 | ||||
| Minimum | 18,5 | 19 | 19,0 | 19,0 | 19,0 | 19,0 | |||||
| OIP3 | Typical | 25 | 25 | 29 | 29 | 26 | 25 | ||||
Related Products
