Zoom the image with the mouse
ETL Systems
ETL Systems ALT-S-S6-201 Alto S-band Smart Slope Equaliser: 10 Db Slope, 23 Dbm 1db Gcp
Product Code:
ALT-S-S6-201
Condition:
New
Availability:
YES
Weight:
6.00 KGS
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Model ALT-S-S6-201 S-band (850-3150MHz) slope equaliser with fixed gain ALTO Amplifier module with 10dB slope range.
See below for Alto Amplifier chassis' compatible with the Alto Amplifier Modules. For full technical specifications please check the datasheet.
Typical Applications
- Front end RF chain
- Providing cable loss compensation for teleports
- TVRO and head-ends.
| Amplifier Module - RF Parameters | |||||||
| Amp Module Model Number | ALT-S-S6-201 | ||||||
| Frequency Range | 850-3150 MHz (S-band) | ||||||
| RF Connectors | 50Ω SMA | 50Ω N-type | |||||
| Insertion Loss | 15 dB Max (at 0dB slope setting) | ||||||
| Gain Flatness | Full band | ±1.25 dB (at 0dB slope setting) | |||||
| 850-2150 MHz | ±0.75 dB (at 0dB slope setting) | ||||||
| 1650-3150 MHz | ±0.50 dB (at 0dB slope setting) | ||||||
| Any 36MHz | ±0.25 dB (at 0dB slope setting) | ||||||
| Slope Control Range | 1650-3150 MHz | 0 to 6 dB (Pivot point at 3150 MHz) | |||||
| 850-3150 MHz | 0 to 10 dB (Pivot point at 3150 MHz) | ||||||
| Slope Control Steps |
1650-3150 MHz | 0.65±0.5 dB | |||||
| 850-3150 MHz | 1.0±0.5 dB | ||||||
| Input Return Loss | 0dB Slope | 16 dB Typical, 12 dB Minimum | |||||
| 10dB Slope | 15 dB Typical, 10 dB Minimum | ||||||
| Output Return Loss | 0dB Slope | 16 dB Typical, 12 dB Minimum | |||||
| 10dB Slope | 15 dB Typical, 10 dB Minimum | ||||||
| Input 1dB Gain Compression | 23 dBm Typical, 18 Min (at 0dB slope) | ||||||
| IIP3 | 46 dBm Typical, 43 dBm Minimum (at 0dB slope) | ||||||
| IIP2 | 60 dBm Typical, 55 dBm Minimum (at 0dB slope) | ||||||
| In band, signal independent spurii | < - 85 dBm max Very low level spurii from CPU clock, switch mode PSU and other control electronics inside the chassis. | ||||||
| MTBF | > 150,000 hours MTBF of each amp module. These are hot swap | ||||||
| Maximum Input level | +25 dBm | ||||||
| Control method | Via chassis. Local and remote as provided by selected chassis. | ||||||
| LNB Power | None. See alternative amplifier modules if LNB power is required. | ||||||
| Chassis Options - Specification | |||||||
| Amp Chassis Model Numbers | ALT-C200-1U | ALT-C201-2U | ALT-C202-2U | ALT-C204-2U | ALT-C205-2U | ||
| Capacity | Up to 8 modules (4 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
||
| Dimensions | 1U high x 350mm deep x 19” wide | 2U high x 350mm deep x 19” wide | 2U high x 450mm deep x 19” wide | 2U high x 350mm deep x 19” wide | 2U high x 350mm deep x 19” wide | ||
| Local control & monitoring | Via front panel push buttons & display | ||||||
| Remote control & monitoring | RJ45 Ethernet, 10BaseT/100BaseTx, ETL TCP/IP protocol, SNMP & Web Browser Interface | ||||||
| - | - | RS232/485 serial | - | - | |||
| Temperature Monitoring | Each amplifier module, CPU board & equipment chassis. As provided by the module. | ||||||
| PSU Status | Each PSU individually monitored & reported | ||||||
| Fan Status | - | - | Taco equipped fans, speed monitored | - | - | ||
| LNB Power | 18VDC at 500mA switchable—with suitable module | None | None | None | |||
| AC Power | 85-264Vac 50/60 Hz, Fused 2A | ||||||
| PSU | Dual redundant, Diode OR | Dual redundant, Diode OR | Dual redundant, Diode OR | Dual redundant, Diode OR | Dual redundant, Diode OR | ||
| Hot-swap PSU | No | No | Yes (from front) | Yes | No | ||
| Power Consumption | < 100W all channels, LNB off < 200W all channels LNB on |
< 100W all channels, LNB off | < 100W all channels, LNB off | < 100W all channels, LNB off | |||
| Weight / Colour | 6 kg / RAL9003 – White | 10 kg / RAL9003 – White | 8 kg / RAL9003 – White | 8 kg / RAL9003 – White | 8 kg / RAL9003 – White | ||
| Temperature | Operating: 0 to 50 °C / Storage: -20 to +75 °C | ||||||
| Humidity / Location | 20% to 90% non-condensing / Indoor use only | ||||||
5 customers are viewing this product
Details
Model ALT-S-S6-201 S-band (850-3150MHz) slope equaliser with fixed gain ALTO Amplifier module with 10dB slope range.
See below for Alto Amplifier chassis' compatible with the Alto Amplifier Modules. For full technical specifications please check the datasheet.
Typical Applications
- Front end RF chain
- Providing cable loss compensation for teleports
- TVRO and head-ends.
| Amplifier Module - RF Parameters | |||||||
| Amp Module Model Number | ALT-S-S6-201 | ||||||
| Frequency Range | 850-3150 MHz (S-band) | ||||||
| RF Connectors | 50Ω SMA | 50Ω N-type | |||||
| Insertion Loss | 15 dB Max (at 0dB slope setting) | ||||||
| Gain Flatness | Full band | ±1.25 dB (at 0dB slope setting) | |||||
| 850-2150 MHz | ±0.75 dB (at 0dB slope setting) | ||||||
| 1650-3150 MHz | ±0.50 dB (at 0dB slope setting) | ||||||
| Any 36MHz | ±0.25 dB (at 0dB slope setting) | ||||||
| Slope Control Range | 1650-3150 MHz | 0 to 6 dB (Pivot point at 3150 MHz) | |||||
| 850-3150 MHz | 0 to 10 dB (Pivot point at 3150 MHz) | ||||||
| Slope Control Steps |
1650-3150 MHz | 0.65±0.5 dB | |||||
| 850-3150 MHz | 1.0±0.5 dB | ||||||
| Input Return Loss | 0dB Slope | 16 dB Typical, 12 dB Minimum | |||||
| 10dB Slope | 15 dB Typical, 10 dB Minimum | ||||||
| Output Return Loss | 0dB Slope | 16 dB Typical, 12 dB Minimum | |||||
| 10dB Slope | 15 dB Typical, 10 dB Minimum | ||||||
| Input 1dB Gain Compression | 23 dBm Typical, 18 Min (at 0dB slope) | ||||||
| IIP3 | 46 dBm Typical, 43 dBm Minimum (at 0dB slope) | ||||||
| IIP2 | 60 dBm Typical, 55 dBm Minimum (at 0dB slope) | ||||||
| In band, signal independent spurii | < - 85 dBm max Very low level spurii from CPU clock, switch mode PSU and other control electronics inside the chassis. | ||||||
| MTBF | > 150,000 hours MTBF of each amp module. These are hot swap | ||||||
| Maximum Input level | +25 dBm | ||||||
| Control method | Via chassis. Local and remote as provided by selected chassis. | ||||||
| LNB Power | None. See alternative amplifier modules if LNB power is required. | ||||||
| Chassis Options - Specification | |||||||
| Amp Chassis Model Numbers | ALT-C200-1U | ALT-C201-2U | ALT-C202-2U | ALT-C204-2U | ALT-C205-2U | ||
| Capacity | Up to 8 modules (4 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
Up to 16 modules (8 modules with N-type connectors) |
||
| Dimensions | 1U high x 350mm deep x 19” wide | 2U high x 350mm deep x 19” wide | 2U high x 450mm deep x 19” wide | 2U high x 350mm deep x 19” wide | 2U high x 350mm deep x 19” wide | ||
| Local control & monitoring | Via front panel push buttons & display | ||||||
| Remote control & monitoring | RJ45 Ethernet, 10BaseT/100BaseTx, ETL TCP/IP protocol, SNMP & Web Browser Interface | ||||||
| - | - | RS232/485 serial | - | - | |||
| Temperature Monitoring | Each amplifier module, CPU board & equipment chassis. As provided by the module. | ||||||
| PSU Status | Each PSU individually monitored & reported | ||||||
| Fan Status | - | - | Taco equipped fans, speed monitored | - | - | ||
| LNB Power | 18VDC at 500mA switchable—with suitable module | None | None | None | |||
| AC Power | 85-264Vac 50/60 Hz, Fused 2A | ||||||
| PSU | Dual redundant, Diode OR | Dual redundant, Diode OR | Dual redundant, Diode OR | Dual redundant, Diode OR | Dual redundant, Diode OR | ||
| Hot-swap PSU | No | No | Yes (from front) | Yes | No | ||
| Power Consumption | < 100W all channels, LNB off < 200W all channels LNB on |
< 100W all channels, LNB off | < 100W all channels, LNB off | < 100W all channels, LNB off | |||
| Weight / Colour | 6 kg / RAL9003 – White | 10 kg / RAL9003 – White | 8 kg / RAL9003 – White | 8 kg / RAL9003 – White | 8 kg / RAL9003 – White | ||
| Temperature | Operating: 0 to 50 °C / Storage: -20 to +75 °C | ||||||
| Humidity / Location | 20% to 90% non-condensing / Indoor use only | ||||||
Related Products
