Zoom the image with the mouse
Avcom
Avcom LBR-2195A Embedded L-Band Beacon Receiver
Product Code:
LBR-2195A
Condition:
New
Weight:
0.20 KGS
Width:
13.97
(cm)
Height:
2.39
(cm)
Depth:
11.43
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Avcom LBR-2195A Embedded L-Band Beacon Receiver
The LBR-2195A is a software-defined radio (SDR) satellite beacon receiver that provides DC output voltage proportionate to the input RF signal level over L-Band The receiver will remain locked on the CW carrier signal and provide the DC output voltage relative to input RF level at the tuned center frequency. The LBR-2195A can also lock on and track BPSK -type modulated carriers signals with excellent performance Typical Time-to-lock period is <3 seconds The LBR-2195A has been designed with the systems integrator in mind for satellite antenna and uplink power controller systems, the small form-factor is ideal for low-profile and restricted spaces.
• Track L-Band CW Beacon Carrier; BPSK Carrier
• Synthesized Direct conversion tuner system
• Serial text-based API interface for easy implementation with simple embedded processors
• Comprehensive API on USB for easy development
• Extended Temperature Range
• Low SWaP-C
| PARAMETER | PERFORMANCE |
| M&C | |
| CONNECTOR | DB-25 Male |
|
COMUNICATION TYPES |
RS-232 (9600, N,8,1) (New Text based API)
RS-422 (9600, N,8,1) (New Text based API) RS-232 continuous data stream out. USB (via sbs2api) (Optional/Additional Cost) |
| POWER CONNECTOR | 2-pin Molex |
| POWER SUPPLY | 8VDC to 33VDC, <3W |
| PHYSICAL DIMENSIONS | |
| Size: | Mini-CLM (5.5″L x 4.5″W x .94″H)
Stacked Block (4.75″L x 4″W x 1.07″H) |
| WEIGHT: | TBD |
| ENVIRONMENTAL | |
| OPERATING TEMPERATURE | -30°C to 60°C |
| STORAGE TEMPERATURE | -40°C to 85°C |
| HUMIDITY | 0 to 95%, non-condensing |
| RF | |
| INPUT CONNECTOR | SMA, 50 ohms |
| INPUT FREQUENCY RANGE | 950 to 2150 MHz |
| TUNING STEP SIZE | 1k Hz |
| INPUT LEVEL RANGE: | -30 to -90 dBm |
| MAXIMUM INPUT POWER LEVEL | -20 dBm |
| DYNAMIC RANGE | 40 dB |
| DETECTION BANDWIDTH | 10 to 750 kHz |
| TRACKING BANDWIDTH | 10 to 150 kHz |
| DETECTED BEACON LEVEL FILTERING | Low-Pass, User-Select: 0.25Hz, 0.5Hz, 1Hz, 2Hz, 3Hz |
| SEARCH/TRACK RATE | 10 Hz |
| ACQUISITION TIME | <1 second typical |
| ADJUSTABLE DELAY BEFORE LOCK | 0 to 5000 milliseconds |
| BEACON/CARRIER TYPE: | CW, BPSK (No Demod) |
| BEACON RECEIVER | BR Only/No SA mode |
| SENSITIVITY | 40 dB-Hz |
| RECEIVER OUTPUTS | |
| CONNECTOR | DB-25 Male |
| ANALOG SIGNAL STRENGTH INDICATOR OUTPUT | 0 to 10 VDC, 25 mA |
| ANALOG SLOPE | 0.1 to 3.0 Volts/dB |
| ANALOG SLOPE POLARITY | Positive or Negative |
| ANALOG OUTPUT FILTERING | Low-Pass, 0.5 Hz, fixed |
| DIGITAL LOCK INDICATOR OUTPUT POLARITY | Adjustable (H=LOCK or L=LOCK) |
| ALARM RELAY | Form C, NC |
5 customers are viewing this product
Details
Avcom LBR-2195A Embedded L-Band Beacon Receiver
The LBR-2195A is a software-defined radio (SDR) satellite beacon receiver that provides DC output voltage proportionate to the input RF signal level over L-Band The receiver will remain locked on the CW carrier signal and provide the DC output voltage relative to input RF level at the tuned center frequency. The LBR-2195A can also lock on and track BPSK -type modulated carriers signals with excellent performance Typical Time-to-lock period is <3 seconds The LBR-2195A has been designed with the systems integrator in mind for satellite antenna and uplink power controller systems, the small form-factor is ideal for low-profile and restricted spaces.
• Track L-Band CW Beacon Carrier; BPSK Carrier
• Synthesized Direct conversion tuner system
• Serial text-based API interface for easy implementation with simple embedded processors
• Comprehensive API on USB for easy development
• Extended Temperature Range
• Low SWaP-C
| PARAMETER | PERFORMANCE |
| M&C | |
| CONNECTOR | DB-25 Male |
|
COMUNICATION TYPES |
RS-232 (9600, N,8,1) (New Text based API)
RS-422 (9600, N,8,1) (New Text based API) RS-232 continuous data stream out. USB (via sbs2api) (Optional/Additional Cost) |
| POWER CONNECTOR | 2-pin Molex |
| POWER SUPPLY | 8VDC to 33VDC, <3W |
| PHYSICAL DIMENSIONS | |
| Size: | Mini-CLM (5.5″L x 4.5″W x .94″H)
Stacked Block (4.75″L x 4″W x 1.07″H) |
| WEIGHT: | TBD |
| ENVIRONMENTAL | |
| OPERATING TEMPERATURE | -30°C to 60°C |
| STORAGE TEMPERATURE | -40°C to 85°C |
| HUMIDITY | 0 to 95%, non-condensing |
| RF | |
| INPUT CONNECTOR | SMA, 50 ohms |
| INPUT FREQUENCY RANGE | 950 to 2150 MHz |
| TUNING STEP SIZE | 1k Hz |
| INPUT LEVEL RANGE: | -30 to -90 dBm |
| MAXIMUM INPUT POWER LEVEL | -20 dBm |
| DYNAMIC RANGE | 40 dB |
| DETECTION BANDWIDTH | 10 to 750 kHz |
| TRACKING BANDWIDTH | 10 to 150 kHz |
| DETECTED BEACON LEVEL FILTERING | Low-Pass, User-Select: 0.25Hz, 0.5Hz, 1Hz, 2Hz, 3Hz |
| SEARCH/TRACK RATE | 10 Hz |
| ACQUISITION TIME | <1 second typical |
| ADJUSTABLE DELAY BEFORE LOCK | 0 to 5000 milliseconds |
| BEACON/CARRIER TYPE: | CW, BPSK (No Demod) |
| BEACON RECEIVER | BR Only/No SA mode |
| SENSITIVITY | 40 dB-Hz |
| RECEIVER OUTPUTS | |
| CONNECTOR | DB-25 Male |
| ANALOG SIGNAL STRENGTH INDICATOR OUTPUT | 0 to 10 VDC, 25 mA |
| ANALOG SLOPE | 0.1 to 3.0 Volts/dB |
| ANALOG SLOPE POLARITY | Positive or Negative |
| ANALOG OUTPUT FILTERING | Low-Pass, 0.5 Hz, fixed |
| DIGITAL LOCK INDICATOR OUTPUT POLARITY | Adjustable (H=LOCK or L=LOCK) |
| ALARM RELAY | Form C, NC |
Related Products
