Agilis
Agilis ALB290FCH-200J ALB290 Series 200W C-Band VSAT Outdoor Block-Up Converter N Input (BUC)
Product Code:
ALB290FCH-200J
Condition:
New
Availability:
Please Contact Us At Contact@Orbitalconnect.Com Or 888.315.9545.
Weight:
9.00 KGS
Width:
28.40
(cm)
Height:
16.40
(cm)
Depth:
20.90
(cm)
$26,153.85
The ALB290 200W Series from Agilis is a Block Up Converter with IF frequency 950 to 1825MHz, RF/Output Frequency 5.850 to 6.725GHz, LO Frequency 7675MHz / 4900MHz, Saturated Power 53 dBm, Linear Power 48 dBm.
RF Specifications | |
Transmit Frequency | Full C |
IF Frequency Range | Full C-Band LO : 7675MHz / 4900MHz IF : 950 to 1825MHz Tx : 5.850 to 6.725GHz |
Output Power @ Psat | 53dBm (200W) |
Small Signal Gain | 70dB min |
Gain Flatness | ±2dB over the O/P frequency band |
Gain Variation | ±1.5dB over the operating temperature range |
Gain Control | 30dB in step of 0.1dB |
Inter Modulation | -25dBc @ Relative to combine power of two carriers at 3dB total power backoff from Rated Output power |
O/P spurious | According to EN301443 |
Phase Noise @ Offset | |
1KHz 10KHz 100KHz |
-80dBc/Hz -90dBc/Hz -100dBc/Hz |
I/P VSWR | 1.5:1 |
O/P VSWR | 1.5:1 |
Noise Power Density Tx BD | 70dBm/ 4KHz |
Rx BD | 142dBm/ 4KHz |
DC Power Requirement | |
Prime Power | 90 – 264VAC, 50 – 60Hz |
Power Consumption | 1000W (Typical for 200W) |
Interfaces | |
IF Input Interface | 50Ohms N-type Female |
Output Interface | CPRG 137G |
External Reference Requirement | |
Frequency | 10MHz |
Power | -5dBm to +5dBm |
Internal 10MHz Ref | Built-in (auto-detection) |
External reference phase noise requirement @ frequency offset | |
1kHz 10kHz 100kHz |
-150dBc/Hz -155dBc/Hz -160dBc/Hz |
Monitor & Control | |
Monitor | BUC Temperature, Status Alarm, RF Output Power/RF Input Power, RF Reflected Output Power, LED Status Indication |
Control | Attenuation, RF output mute |
Interface | RS232/485, Ethernet (SNMP & HTTP) & Wifi (Optional) |
Tx Redundancy | Built-in |
Environmental | |
Operating Temperature | -40°C to +60°C |
Humidity | Up to 100%, Weather protection sealed to IP65 |
Mechanical | |
Size | 284L x 209W x 164H |
Weight | 9kg |
Color | White Powder Coat |
5 customers are viewing this product
Details
The ALB290 200W Series from Agilis is a Block Up Converter with IF frequency 950 to 1825MHz, RF/Output Frequency 5.850 to 6.725GHz, LO Frequency 7675MHz / 4900MHz, Saturated Power 53 dBm, Linear Power 48 dBm.
RF Specifications | |
Transmit Frequency | Full C |
IF Frequency Range | Full C-Band LO : 7675MHz / 4900MHz IF : 950 to 1825MHz Tx : 5.850 to 6.725GHz |
Output Power @ Psat | 53dBm (200W) |
Small Signal Gain | 70dB min |
Gain Flatness | ±2dB over the O/P frequency band |
Gain Variation | ±1.5dB over the operating temperature range |
Gain Control | 30dB in step of 0.1dB |
Inter Modulation | -25dBc @ Relative to combine power of two carriers at 3dB total power backoff from Rated Output power |
O/P spurious | According to EN301443 |
Phase Noise @ Offset | |
1KHz 10KHz 100KHz |
-80dBc/Hz -90dBc/Hz -100dBc/Hz |
I/P VSWR | 1.5:1 |
O/P VSWR | 1.5:1 |
Noise Power Density Tx BD | 70dBm/ 4KHz |
Rx BD | 142dBm/ 4KHz |
DC Power Requirement | |
Prime Power | 90 – 264VAC, 50 – 60Hz |
Power Consumption | 1000W (Typical for 200W) |
Interfaces | |
IF Input Interface | 50Ohms N-type Female |
Output Interface | CPRG 137G |
External Reference Requirement | |
Frequency | 10MHz |
Power | -5dBm to +5dBm |
Internal 10MHz Ref | Built-in (auto-detection) |
External reference phase noise requirement @ frequency offset | |
1kHz 10kHz 100kHz |
-150dBc/Hz -155dBc/Hz -160dBc/Hz |
Monitor & Control | |
Monitor | BUC Temperature, Status Alarm, RF Output Power/RF Input Power, RF Reflected Output Power, LED Status Indication |
Control | Attenuation, RF output mute |
Interface | RS232/485, Ethernet (SNMP & HTTP) & Wifi (Optional) |
Tx Redundancy | Built-in |
Environmental | |
Operating Temperature | -40°C to +60°C |
Humidity | Up to 100%, Weather protection sealed to IP65 |
Mechanical | |
Size | 284L x 209W x 164H |
Weight | 9kg |
Color | White Powder Coat |