Zoom the image with the mouse
ETL Systems
Griffin Redundancy Switch Module IF-Band 2x1 with RF Detection
Product Code:
GRF-011-XXXX
Condition:
New
Availability:
YES
Weight:
3.00 KGS
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Model GRF-011 is a 2 x 1 DC-850 IF-Band Redundancy Switch module with RF Detection. The module is designed to be housed in the 1U high Griffin GRF-C900-1U chassis, with 2 module slots for multiple configurations.
Switch modules can be switched independently (individual mode) or together (simultaneous mode). Switching may be triggered by front panel, RF level detection, alarm contacts or NMS. When operating in Auto mode, modules with RF level detection will switch from main to standby on detection of a fault on the main. Switch back to the main path is configurable. The default setting is for the unit to latch to the standby path and not automatically switch back to the main path if the RF signal is restored.
The chassis features dual redundant PSUs and hot-swap switch modules.
5 customers are viewing this product
Details
Model GRF-011 is a 2 x 1 DC-850 IF-Band Redundancy Switch module with RF Detection. The module is designed to be housed in the 1U high Griffin GRF-C900-1U chassis, with 2 module slots for multiple configurations.
Switch modules can be switched independently (individual mode) or together (simultaneous mode). Switching may be triggered by front panel, RF level detection, alarm contacts or NMS. When operating in Auto mode, modules with RF level detection will switch from main to standby on detection of a fault on the main. Switch back to the main path is configurable. The default setting is for the unit to latch to the standby path and not automatically switch back to the main path if the RF signal is restored.
The chassis features dual redundant PSUs and hot-swap switch modules.
Related Products
