ETL Systems

Minature Signal Generator 25 MHz to 3000 MHz with USB or RS232 control interface adjustable in 1 Hz step sizes. Internal or External reference fitted with SMA Female RF connectors.   RF...

Dual switch Mode power supplies with individual IEC inputs of 90 to 264V AC and 12V DC outputs. The unit is supplied with a female 16 pin molex connector configured for use with ETL fibre components...

Switch Mode power supply with input of 90 to 264V AC and 12V DC output. The unit is supplied with IEC cable at the mains end and a female 3 pin molex connection. Maximum current rating is 1.25A.

Model PSU05F20-9704 Switch Mode Power Supply with input range of 96 to 264V (AC) with fixed 5V output voltage and 4 A max permissible load. The unit is supplied with IEC cable...

Switch Mode power supply with input of 90 to 264V AC and 12V DC output. The unit is supplied with IEC cable at the mains end and soldered pins at the DC end. Maximum current rating is 1.25A.

Dual switch Mode power supplies with individual IEC inputs of 90 to 264V AC and 12V DC outputs. The unit is supplied with a female 16 pin molex connector configured for dual redundancy when used with...

Highly efficient outdoor ready IP65 rated fixed 24V power supply unit. Fitted with Lemo Connector FGL.1K.302.CLLK75Z for DCIntended for use with ETL’s outdoor units e.g. model...

IP65 rated weatherproof 12V power supply. Key Features: - Two IP65 rated power units & connectors. - Removable cover for hot swap in case of failure. For use with ETL's StingRay RF Over Fibre...

Single unit IP65 rated weatherproof 12V power supply for use with StingRay RF Over Fibre ODU modules. Parameter Specification Comments AC Input 100-305 VAC, 50/60Hz - AC input connection Must...

Wideband DC-6GHz lightning surge protectors with 5KV max voltage protection.  Model LA01CXP-1700 is ideally suited for GPS and GNSS applications.

S-band passive impedance transformer between 50Ω to 75Ω impedance, with DC block & 10MHz pass on both ports. These components are available with the following RF connector options:...

S-band passive impedance transformer between 50Ω to 75Ω impedance, with DC and 10MHz block on both ports. These components are available with the following RF...