Zoom the image with the mouse
Actox
Actox ACLU011/ACLU011R - Universal LNB / LNA Redundancy Controller
Product Code:
ACLU011/ACLU011R
Condition:
New
Availability:
YES
Weight:
2.60 KGS
Width:
21.40
(cm)
Height:
5.65
(cm)
Depth:
18.80
(cm)
$7,263.00
Key Features:
- Monitor the status of two LNB / LNA units
- Operate in automatic or changeover mode
- Display status information of unit in the receive chains
- Manual and automatic operation of the receive chains
- Visual indications of the “ on line” chain for recieve systems
- Visual indication (latching) of chain alarms
- Remote M&C of chain changeover and unit funtions via RS-232/485/422 built in. TSP/IP Ethernet interface (optional)
- LNB / LNA power supply voltage regulation and current fault protection
- 10MHz reference insertion/monitoring - switchable ON/OFF
- LNB / LNA RB temperature monitoring
| Parameter | Value |
| Monitoring & controlling | Local / Remote |
| Methods of switching | Auto/Manual/physically Rotating SW |
| LNB/A power supply voltage | Adjustable, 12V-24V (over remote protocol) |
| LNB/A power supply current | 0.6 amps max. |
| LNB’s nominal supply current adjust | 100 mA to 600 mA |
| LNB’s current alarm window width | ±5% to ±25% of nominal; software selectable in 5% steps |
| Switchover time | 100 msec |
| IF input / output impedance / connector | 50ohms – N-type Female or F-type Female |
| IF bandwidth | 950 MHz – 1700 MHz |
| IF insertion loss | 3 dB typ |
| Serial I/O: interface | RS-232: RS-422: RS-485 – Ethernet optional |
| RF WG switch actuating voltage | 24 VDC |
| AC input | 87-265 VAC, 47-63 Hz, 100W |
| LNB status alarms | Front panel LED indicators glow green when all OK, red when an LNB fault is detected |
| Unit buttons and indicators | Buttons are used to manually switch the LNBs. LED indicators show which LNBs are switched on-line. Red LEDs indicate faulted LNB |
| Auto/Manual switch and indicators | In auto mode, an LNB failure initiates the automatic switchover to the standby LNB. In manual mode, the online LNB can be selected from the front panel |
| Remote/Local switch and indicators | Selects either local or remote control from manual switch on front of serial interface. |
| Dimensions | 11.81" (300 mm) W x 7.87" (200 mm) H x 1.97" (50 mm) D; (3.0 kg) |
5 customers are viewing this product
Details
Key Features:
- Monitor the status of two LNB / LNA units
- Operate in automatic or changeover mode
- Display status information of unit in the receive chains
- Manual and automatic operation of the receive chains
- Visual indications of the “ on line” chain for recieve systems
- Visual indication (latching) of chain alarms
- Remote M&C of chain changeover and unit funtions via RS-232/485/422 built in. TSP/IP Ethernet interface (optional)
- LNB / LNA power supply voltage regulation and current fault protection
- 10MHz reference insertion/monitoring - switchable ON/OFF
- LNB / LNA RB temperature monitoring
| Parameter | Value |
| Monitoring & controlling | Local / Remote |
| Methods of switching | Auto/Manual/physically Rotating SW |
| LNB/A power supply voltage | Adjustable, 12V-24V (over remote protocol) |
| LNB/A power supply current | 0.6 amps max. |
| LNB’s nominal supply current adjust | 100 mA to 600 mA |
| LNB’s current alarm window width | ±5% to ±25% of nominal; software selectable in 5% steps |
| Switchover time | 100 msec |
| IF input / output impedance / connector | 50ohms – N-type Female or F-type Female |
| IF bandwidth | 950 MHz – 1700 MHz |
| IF insertion loss | 3 dB typ |
| Serial I/O: interface | RS-232: RS-422: RS-485 – Ethernet optional |
| RF WG switch actuating voltage | 24 VDC |
| AC input | 87-265 VAC, 47-63 Hz, 100W |
| LNB status alarms | Front panel LED indicators glow green when all OK, red when an LNB fault is detected |
| Unit buttons and indicators | Buttons are used to manually switch the LNBs. LED indicators show which LNBs are switched on-line. Red LEDs indicate faulted LNB |
| Auto/Manual switch and indicators | In auto mode, an LNB failure initiates the automatic switchover to the standby LNB. In manual mode, the online LNB can be selected from the front panel |
| Remote/Local switch and indicators | Selects either local or remote control from manual switch on front of serial interface. |
| Dimensions | 11.81" (300 mm) W x 7.87" (200 mm) H x 1.97" (50 mm) D; (3.0 kg) |
Related Products
