Terrasat IBUC R Ku Band 80W-1

IBUC R Ku-Band Intelligent Block Upconverter

The Terrasat Ku-Band IBUC R Series has all of the advanced IBUC features and the upgraded RJ45 M&C connector. This block upconverter offers significant benefits including low terminal cost, simple design and installation, superior RF performance and a reliable 1+1 configuration.

The IBUC R Series also provides new interfaces for connecting you to extensive M&C facilities for network management or local access. This powerful M&C enables trouble‐free commissioning with easy, point‐and‐click installation/configuration, continuous verification of performance with time‐stamped alarm history and simplified monitoring of terminal status

IBUC-R comes with a complete set of diagnostic tools including:

 10 MHz input detector
 Input voltage and current monitoring
 Transmit L‐band input level detector
 Transmit RF output level detector
 User configurable thresholds and alarms

Unique to the IBUC are internal AGC and ALC functions that satisfy demanding applications with stringent specifications.

Frequency Range RF IF
Band 1 Std Ku 14.00 to 14.50 GHz 950 to 1450 MHz
Band 2 Full Ku 13.75 to 14.50 GHz 950 to 1700 MHz
Band 3 Low Ku 12.75 to 13.25 GHz 950 to 1450 MHz
Input
VSWR/Impedance 1.5:1 max/ 50 Ohm
Input Connector Type N Female (50 Ohm)
Input Connector Options Type F (75 Ohm), TNC (50 Ohm)
Input Power Detector Range -55 to -20 dBm
Gain
Small Signal Gain (L-band to RF) with Attenuator Set to 0 dB
60W 79 dB min
80W 80 dB min
100W 81 dB min
125W (band 3) 82 dB min
200W 83 dB min
Attenuator Range 30 dB Variable in 0.1 dB Steps
Gain Flatness
Full Band 4 dB p-p max
36 MHz 1.5 dB p-p max
1 MHz 0.25 dB p-p max
Gain Variation Over Temperature
Open Loop 3 dB p-p max
With AGC 1 dB p-p max
RF Output
Interface WR75 Cover with Groove
VSWR 1.3:1 max
Rated Output Power (P1dB) Band 1 & 3 Band 2
60W +47.8 dBm min +47.5 dBm min
80W +49.0 dBm min +48.5 dBm min
100W +50.0 dBm min +49.5 dBm min
125W (Band 3) +51.0 dBm min
200W +53 dBm min +52.5 dBm min
IMD3 (2 Carriers, 3 dB TOBO) -24 dBc max
Level Stability with ALC ± 0.5 dB
Output Power Detector Range Rated power to -20 dB
Power Reading Accuracy ± 1.0 dB max
Spurious
In Band -65 dBc
Out Band Complies with EN 301 428/430
& MIL-STD 188-164B.
Harmonics -50 dBc Max
Output Noise Power Density TX <- 73 dBm/Hz
RX <- 145 dBm/Hz

SSB Phase Noise External Reference IBUC
R
10 Hz -115 dBC/Hz -50 dBc/Hz
100 Hz -140 dBc/Hz -75 dBc/Hz
1 KHz -150 dBc/Hz -85 dBc/Hz
10 KHz -155 dBc/Hz -90 dBc/Hz
100 KHz N/A -95 dBc/Hz
1 MHz N/A -110 dBc/Hz
External Reference (Multiplexed on TX IFL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - Optional
Local Oscillator Frequency
Sense Non-Inverting
Band 1 13050 MHz
Band 2 12800 MHz
Band 3 11800 MHz
IBUC Power Supply
Voltage DC 42 V min, 60 V max
AC 100 to 240 VAC 60W to 125W
200 to 240 VAC 200W
Power Consumption DC AC
60W (Bands 1 & 2) 600 W 700 VA
60W (Band 3) 750 W 850 VA
80W 780 W 900 VA
100W (Band 3) 950 W 1050 VA
100W (Bands 1 & 2) 1250 VA
125W (Band 3) 1250 VA
200W 2150 VA
Monitor & Control
Ethernet (HTTP, Telnet, SNMP) via RJ45 Connector
RS232/485, Handheld Terminal via MS-Type Connector,
FSK multiplexed on TX IFL.
Environmental
Operating Temperature -40°C to +55°C
Relative Humidity 100% Condensing
Altitude 10,000 ft (3,000 m) ASL
Mechanical DC Powered AC Powered
60 W (Bands 1 & 2) 12.2 x 7.2 x 6.5 in.
310 x 183 x 165 mm.
18.5 lbs
8.4 kgs
12.2 x 7.2 x 6.8 in.
310 x 183 x 173 mm.
19.5 lbs
8.8 kgs
80 W (All Bands)
60 W & 100 W (Band 3)
16.2 x 10 x 7.4 in.
411 x 254 x 188 mm.
32 lbs
14.5 kgs
16.2 x 10 x 7.6 in.
411 x 254 x 193 mm
.
33 lbs
15 kgs
100 W (Bands 1 & 2)
& 125 W (Band 3)
23 x 10 x 7.4 in.
584 x 254 x 188 mm.
37 lbs
16.8 kgs
200 W 29 x 15 x 10.1 in.
737 x 381 x 257 mm.
83 lbs
38 kgs