STINGRAY RF OVER FIBRE CHASSIS, 16 MODULE, 200 SERIES WITH 10MHZ INJECT

Model SRY-C205-2U is a compact 200 series StingRay chassis with a 10MHz injection port, which distributes a 10MHz reference signal to up to 16 200 series RF over Fibre modules in the chassis, from an external source. The chassis is 2U high x 450mm deep x 19" wide.

The chassis benefits from dual redundant hot-swap power supplies, hot-swap fans and RF over Fibre modules.

Control and monitoring of the chassis can be done via Ethernet port with RJ45 and web browser interface. Local control and monitoring can be done via front panel LCD and keypad.

Resilience is provided with dual redundant hot-swap power supplies, hot-swap fibre modules and fans. With dual IEC.

See below for StingRay Fibre modules compatible with the StingRay Fibre Chassis

The StingRay 200 series RF over fibre indoor and outdoor chassis can be configured to provide 1+1 redundancy, with the addition of a 2-way splitter and 2x1 switch module. Redundancy provides additional resilience for uplink and downlink transmissions over fibre.

StingRay 1+1 redundant fibre link comprises an active 2-way splitter module with a pair of TX modules at the transmit end in one chassis, and a high reliability 2x1 switch module with a pair of RX modules at the receive end in another chassis.

Two exact copies of the RF signal are sent via the splitter. RF detection on the inputs of the 2x1 switch measures both signals and selects the one with the highest power.

1+1 redundancy configuration available with splitter (Model SRY-L1-DIV213) and switch (Model-L1-SW214) modules.

Data sheet: 

https://www.etlsystems.com/sites/default/files/products/downloads/StingRay%20200%20Series%20Chassis%20Options%20V2.4_13.pdf