PEPLINK
Peplink MAX-BR2-PRO-5G Wireless Router with Global Dual 5G LTE Modems, WiFi 6
Peplink MAX-BR2-PRO-5G Wireless Router with Global Dual 5G LTE Modems, FirstNet Ready
The MAX-BR2-PRO-5G is a router with seven available WAN connections, including two 5G cellular modems, a Serial Port for M2M/IoT applications, multiple certifications to work in extreme environments, and Ignition Sensing for vehicle installations. The MAX BR2 Pro provides unbreakable 5G in every scenario. The MAX BR2 PRO has a total of 7 ways to connect to the Internet. It comes with 2x 5G Cellular modems, 2x Ethernet WANs, 1x USB WAN, and 2x WiFi-as-WANs (Simultaneous Dual-Band, 1x 2.4GHz, and 1x 5GHz).
The MAX BR2 PRO has a rated throughput of 1Gb/sec. It supports a 4Gb/sec downlink data rate and a 700Mb/sec uplink data rate per cellular modem. If the MAX BR2 PRO cannot receive a 5G network, it is able to receive LTE CAT-20 network with a 2Gb/sec downlink data rate and 150Mb/sec uplink data rate.
With SpeedFusion Connect 5G/LTE, you can access on-demand data plans and only pay for what you need. SpeedFusion Connect 5G/LTE is an all-in-one solution offering access to not only SpeedFusion Connect Protect but also LTE data.
This Peplink product comes with a one-year limited warranty. The first year of PrimeCare is included in the purchase of this PrimeCare device, with the ability to continue afterwards via paid subscription. You can upgrade to PrimeCare+ for additional benefits. Compare the Peplink Care Plans and select one that fits you and your deployment needs.
Key Features
- Hot Failover, WAN Smoothing, Bandwidth Bonding (with PrimeCare subscription)
- 2x 10/100/1000/2500M Ethernet WAN (WAN port can act as a LAN port if needed)
- 2x 5G Modems with Redundant SIM Slots
- 1x USB 3.0 Interface
- 4x 10/100/1000M Ethernet LAN
- Built-in eSIM and SIM Injector support
- PoE Input
- FirstNet Ready
- Drop-in Mode, Load Balancing/Failover, Ignition Sensing
- 1 Gbps Throughput
- Cellular Data Rate (Downlink/Uplink): 5G: 4 Gbps / 700 Mbps, LTE CAT-20: 2 Gbps / 150 Mbps
- InControl2
Category | Cellular Router |
Ethernet Ports | 4 GbE LAN + 2 GbE WAN |
Carrier | AT&T, T-Mobile, US Cellular, Verizon (C-Band), FirstNet |
SIM Holder | 4 SIM slots (4FF form factor) |
Antenna | 8 LTE/5G, 2 WiFi, 1 GPS |
Cloud Protocols | InControl Cloud Management |
Wi-Fi Frequencies | Dual (2.4GHz + 5GHz) 2x2 Wi-Fi 6 |
Power | WiFi: 21 dBm (2.4 GHz) and 22 dBm (5.0 GHz) |
GPS | Yes |
Ignition | Ignition sensing |
Power Consumption | 12W (nominal), 30W (max.) |
Input Voltage | DC10 - 30W |
Dimensions | 8.58 x 7.68 x 1.61 in (218 x 195 x 29.5 mm) |
Weight | 2.42 pounds |
Shock / Vibration | EN 61373 |
Operating Temperature | -40° to 65° C (-40° F to 149° F) |
Humidity | 15 to 95% non-condensing |
RoHS Compliant | Yes |
Certifications | FCC, CE, RoHS |
Safety Standards | EN61373, EN50155, EN61000, E-Mark |
Warranty | 1-Year Limited Warranty |
Peplink MAX-BR2-PRO-5G Wireless Router with Global Dual 5G LTE Modems, FirstNet Ready
The MAX-BR2-PRO-5G is a router with seven available WAN connections, including two 5G cellular modems, a Serial Port for M2M/IoT applications, multiple certifications to work in extreme environments, and Ignition Sensing for vehicle installations. The MAX BR2 Pro provides unbreakable 5G in every scenario. The MAX BR2 PRO has a total of 7 ways to connect to the Internet. It comes with 2x 5G Cellular modems, 2x Ethernet WANs, 1x USB WAN, and 2x WiFi-as-WANs (Simultaneous Dual-Band, 1x 2.4GHz, and 1x 5GHz).
The MAX BR2 PRO has a rated throughput of 1Gb/sec. It supports a 4Gb/sec downlink data rate and a 700Mb/sec uplink data rate per cellular modem. If the MAX BR2 PRO cannot receive a 5G network, it is able to receive LTE CAT-20 network with a 2Gb/sec downlink data rate and 150Mb/sec uplink data rate.
With SpeedFusion Connect 5G/LTE, you can access on-demand data plans and only pay for what you need. SpeedFusion Connect 5G/LTE is an all-in-one solution offering access to not only SpeedFusion Connect Protect but also LTE data.
This Peplink product comes with a one-year limited warranty. The first year of PrimeCare is included in the purchase of this PrimeCare device, with the ability to continue afterwards via paid subscription. You can upgrade to PrimeCare+ for additional benefits. Compare the Peplink Care Plans and select one that fits you and your deployment needs.
Key Features
- Hot Failover, WAN Smoothing, Bandwidth Bonding (with PrimeCare subscription)
- 2x 10/100/1000/2500M Ethernet WAN (WAN port can act as a LAN port if needed)
- 2x 5G Modems with Redundant SIM Slots
- 1x USB 3.0 Interface
- 4x 10/100/1000M Ethernet LAN
- Built-in eSIM and SIM Injector support
- PoE Input
- FirstNet Ready
- Drop-in Mode, Load Balancing/Failover, Ignition Sensing
- 1 Gbps Throughput
- Cellular Data Rate (Downlink/Uplink): 5G: 4 Gbps / 700 Mbps, LTE CAT-20: 2 Gbps / 150 Mbps
- InControl2
Category | Cellular Router |
Ethernet Ports | 4 GbE LAN + 2 GbE WAN |
Carrier | AT&T, T-Mobile, US Cellular, Verizon (C-Band), FirstNet |
SIM Holder | 4 SIM slots (4FF form factor) |
Antenna | 8 LTE/5G, 2 WiFi, 1 GPS |
Cloud Protocols | InControl Cloud Management |
Wi-Fi Frequencies | Dual (2.4GHz + 5GHz) 2x2 Wi-Fi 6 |
Power | WiFi: 21 dBm (2.4 GHz) and 22 dBm (5.0 GHz) |
GPS | Yes |
Ignition | Ignition sensing |
Power Consumption | 12W (nominal), 30W (max.) |
Input Voltage | DC10 - 30W |
Dimensions | 8.58 x 7.68 x 1.61 in (218 x 195 x 29.5 mm) |
Weight | 2.42 pounds |
Shock / Vibration | EN 61373 |
Operating Temperature | -40° to 65° C (-40° F to 149° F) |
Humidity | 15 to 95% non-condensing |
RoHS Compliant | Yes |
Certifications | FCC, CE, RoHS |
Safety Standards | EN61373, EN50155, EN61000, E-Mark |
Warranty | 1-Year Limited Warranty |
Download Name | |
Peplink MAX BR2 PRO 5G Datasheet |