Nisshinbo
Nisshinbo NJS8486E series C-band PLL LNB - Ext Ref.
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Nisshinbo NJS8486E series C-band PLL LNB - Ext. Ref.
Scope
This LNB is designed for the low noise amplifier and block downconverter intended for the satellite communication data downlink application in C-band. It is combined a 3-stage HEMT amplifier and a block downconverter with a phase locked local oscillator (5.15 GHz or 5.76 GHz) which is synchronized with internal high stability TCXO reference or external 10MHz reference. The LNB receives an RF signal (C-band: 3.4 to 4.2 GHz, 3.625 to 4.2 GHz, or 4.5 to 4.8 GHz) as input, downconverts from the RF signal to an IF signal (L-band: 950 to 1,750 MHz, 950 to 1,525 MHz, or 960 to 1,260 MHz), and outputs the IF signal. It is operated by +24 V DC power (range: +12 to +24 V) input. The LNB comes in a single, weatherized housing rated for outdoor use, and has a CPR-229G waveguide flange as RF input and an either an N-type or F-type female connector as IF output.
Features
Frequency Organization
- RF Frequency: 3.4 to 4.2 GHz
- IF Frequency: 950 to 1,750 MHz
- LO Frequency: 5.15 GHz
Low Noise Performance
- Noise Temperature (NT): 15 K typ.
LO Frequency Stability
- E-type: Depends on External Reference
Small Size & Light Weight
- Weight: 800 g
Others
- RoHS Compliance
Items | Parameters | ||
---|---|---|---|
RF Input Interface | Waveguide, CPR229 (with Groove) | ||
IF Output Interface | Coax. Connector, N-type Female (50 Ω) Coax. Connector, F-type Female (75 Ω) |
||
RF Frequency | 3.4 to 4.2 GHz | ||
IF Frequency | 950 to 1,750 MHz | ||
LO Frequency | 5.15 GHz | ||
Linear Gain | 66 dB typ., 59 dB min. @ +25 ℃ | ||
Noise Temperature(NT) | 15 K typ., 30 K max. @ +25 ℃ | ||
Input Power Voltage Requirement | +24 VDC (+12 to +24 VDC) | ||
Current Consumption | 400 mA max. | ||
Operating Temperature Range | -40 to +60 ℃ | ||
Waterproof / Dustproof (IP-code) | IP67 | ||
Weight | 800 g | ||
Dimensions | (L) 80.8 x (W) 99.6 x (H) 76 mm (w/o Interfaces & Screws) |
Nisshinbo NJS8486E series C-band PLL LNB - Ext. Ref.
Scope
This LNB is designed for the low noise amplifier and block downconverter intended for the satellite communication data downlink application in C-band. It is combined a 3-stage HEMT amplifier and a block downconverter with a phase locked local oscillator (5.15 GHz or 5.76 GHz) which is synchronized with internal high stability TCXO reference or external 10MHz reference. The LNB receives an RF signal (C-band: 3.4 to 4.2 GHz, 3.625 to 4.2 GHz, or 4.5 to 4.8 GHz) as input, downconverts from the RF signal to an IF signal (L-band: 950 to 1,750 MHz, 950 to 1,525 MHz, or 960 to 1,260 MHz), and outputs the IF signal. It is operated by +24 V DC power (range: +12 to +24 V) input. The LNB comes in a single, weatherized housing rated for outdoor use, and has a CPR-229G waveguide flange as RF input and an either an N-type or F-type female connector as IF output.
Features
Frequency Organization
- RF Frequency: 3.4 to 4.2 GHz
- IF Frequency: 950 to 1,750 MHz
- LO Frequency: 5.15 GHz
Low Noise Performance
- Noise Temperature (NT): 15 K typ.
LO Frequency Stability
- E-type: Depends on External Reference
Small Size & Light Weight
- Weight: 800 g
Others
- RoHS Compliance
Items | Parameters | ||
---|---|---|---|
RF Input Interface | Waveguide, CPR229 (with Groove) | ||
IF Output Interface | Coax. Connector, N-type Female (50 Ω) Coax. Connector, F-type Female (75 Ω) |
||
RF Frequency | 3.4 to 4.2 GHz | ||
IF Frequency | 950 to 1,750 MHz | ||
LO Frequency | 5.15 GHz | ||
Linear Gain | 66 dB typ., 59 dB min. @ +25 ℃ | ||
Noise Temperature(NT) | 15 K typ., 30 K max. @ +25 ℃ | ||
Input Power Voltage Requirement | +24 VDC (+12 to +24 VDC) | ||
Current Consumption | 400 mA max. | ||
Operating Temperature Range | -40 to +60 ℃ | ||
Waterproof / Dustproof (IP-code) | IP67 | ||
Weight | 800 g | ||
Dimensions | (L) 80.8 x (W) 99.6 x (H) 76 mm (w/o Interfaces & Screws) |