Nisshinbo
Nisshinbo NJR2937E series Ku-band PLL LNB - Ext. Ref.
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Nisshinbo NJR2937E series Ku-band PLL LNB - Ext. Ref.
Scope
This LNB is designed for the low noise amplifier and block downconverter intended for the satellite communication data downlink application in Ku-band. It is combined a 3-stage HEMT amplifier and a block downconverter with a phase locked local oscillator (10 GHz, 10.25 GHz, 10.75 GHz, 11.25 GHz, or 11.3 GHz) which is synchronized with external 10MHz reference. The LNB receives an RF signal (Ku-band: frequency divided by region band from the 10.75 to 12.75 GHz) as input, downconverts from the RF signal to an IF signal (L-band: 950 to 1,700 MHz), and outputs the IF signal. It is operated by +24 V DC power (range: +12 to +24 V) input. The LNB comes in a single, weatherized housing rated for outdoor use, and has a WR-75 waveguide flange with groove as RF input and an either an N-type or F-type female connector as IF output.
Features
Frequency Organization
- RF Frequency: 10.95 to 11.7 GHz
- IF Frequency: 950 to 1,700 MHz
- LO Frequency: 10.0 GHz
Low Noise Performance
- Noise Figure (NF): 0.8 dB typ.
LO Frequency Stability
- E-type: Depends on External Reference
Small Size & Light Weight
- Weight: 260 g
Others
- RoHS Compliance
Items | Parameters | ||
---|---|---|---|
RF Input Interface | Waveguide, WR75 (with Groove) | ||
IF Output Interface | Coax. Connector, N-type Female (50 Ω) Coax. Connector, F-type Female (75 Ω) |
||
RF Frequency | 10.95 to 11.7 GHz | ||
IF Frequency | 950 to 1,700 MHz | ||
LO Frequency | 10.0 GHz | ||
Linear Gain | 60 dB typ., 55 dB min. @ +25 ℃ | ||
Noise Figure(NF) | 0.8 dB typ. @ +25 ℃ | ||
Input Power Voltage Requirement | +24 VDC (+12 to +24 VDC) | ||
Current Consumption | 250 mA max. | ||
Operating Temperature Range | -40 to +60 ℃ | ||
Waterproof / Dustproof (IP-code) | IP67 | ||
Weight | 260 g | ||
Dimensions | (L) 100.5 x (W) 40 x (H) 40 mm (w/o Interfaces & Screws) |
Nisshinbo NJR2937E series Ku-band PLL LNB - Ext. Ref.
Scope
This LNB is designed for the low noise amplifier and block downconverter intended for the satellite communication data downlink application in Ku-band. It is combined a 3-stage HEMT amplifier and a block downconverter with a phase locked local oscillator (10 GHz, 10.25 GHz, 10.75 GHz, 11.25 GHz, or 11.3 GHz) which is synchronized with external 10MHz reference. The LNB receives an RF signal (Ku-band: frequency divided by region band from the 10.75 to 12.75 GHz) as input, downconverts from the RF signal to an IF signal (L-band: 950 to 1,700 MHz), and outputs the IF signal. It is operated by +24 V DC power (range: +12 to +24 V) input. The LNB comes in a single, weatherized housing rated for outdoor use, and has a WR-75 waveguide flange with groove as RF input and an either an N-type or F-type female connector as IF output.
Features
Frequency Organization
- RF Frequency: 10.95 to 11.7 GHz
- IF Frequency: 950 to 1,700 MHz
- LO Frequency: 10.0 GHz
Low Noise Performance
- Noise Figure (NF): 0.8 dB typ.
LO Frequency Stability
- E-type: Depends on External Reference
Small Size & Light Weight
- Weight: 260 g
Others
- RoHS Compliance
Items | Parameters | ||
---|---|---|---|
RF Input Interface | Waveguide, WR75 (with Groove) | ||
IF Output Interface | Coax. Connector, N-type Female (50 Ω) Coax. Connector, F-type Female (75 Ω) |
||
RF Frequency | 10.95 to 11.7 GHz | ||
IF Frequency | 950 to 1,700 MHz | ||
LO Frequency | 10.0 GHz | ||
Linear Gain | 60 dB typ., 55 dB min. @ +25 ℃ | ||
Noise Figure(NF) | 0.8 dB typ. @ +25 ℃ | ||
Input Power Voltage Requirement | +24 VDC (+12 to +24 VDC) | ||
Current Consumption | 250 mA max. | ||
Operating Temperature Range | -40 to +60 ℃ | ||
Waterproof / Dustproof (IP-code) | IP67 | ||
Weight | 260 g | ||
Dimensions | (L) 100.5 x (W) 40 x (H) 40 mm (w/o Interfaces & Screws) |