iDirect
FRC0720 Downconverter
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
The FRC0720 Downconverter is a high performance agile L-band to IF downconverter designed for a wide range of broadcast, telco and IP satellite applications. It offers some advanced and unique features such as a calibrated wide linear gain range over the entire bandwidth combined with a very high frequency stability.
Features of the FRC0720 Downconverter
- Highest signal quality
- High flexibility
- High gain
- Ultra fine L-band frequency resolution
- Very high frequency stability
- High linearity over the entire bandwidth
- Low noise figure
- Switchable spectrum inversion
Description
The FRC0730 is a high performance synthesized up- and downconverter designed for a wide range
of broadcast, telco and IP satellite applications. In its default configuration, the FRC0730 upconverts
IF signals (70 or 140 MHz) to L-band (950–2150 MHz) and simultaneously downconverts L-band
signals (950–2150 MHz) to IF. Optionally, the FRC0730 can upconvert IF signals to C, Ku or DBS-band.
The FRC0730 offers some advanced and unique features such as a calibrated high linearity over the
entire bandwidth combined with a very high frequency stability. These features make the FRC0730
the perfect solution for a wide range of transmissions ranging from very small carriers to full
transponder applications. The IF frequency is switchable from 70 MHz to 140 MHz and the L-band
frequency is adjustable in steps of 48 Hz.
The high output frequency stability is provided by an internal 10 MHz reference clock. For
applications requiring a very high frequency stability, such as very low data rate carriers, an optional
0.01 ppm stability reference clock can be ordered separately.
A switchable DC power supply and a reference frequency on the L-band output are also available as
options, providing a compact and cost effective solution when the FRC0730 is used in combination
with an outdoor RF Upconverter and/or amplifier.
Optionally, an LNB power supply, a frequency band selection signal and a 10 MHz reference
frequency can be delivered to an LNB via the L-band input.
The FRC0730 is easy to operate and monitor. All control and monitoring parameters are available
locally on the front panel and remotely through a web interface. It is also possible to control or
monitor the FRC0730 via RMCP or SNMP.
The FRC0730 is also available as a stand-alone upconverter (model number FRC0710) or as a
stand-alone downconverter (model number FRC0720).
Data sheet:
https://www.idirect.net/wp-content/uploads/2020/03/ProductSheet-FRC-0710-0720-0730-FreqencyConverters.pdf
The FRC0720 Downconverter is a high performance agile L-band to IF downconverter designed for a wide range of broadcast, telco and IP satellite applications. It offers some advanced and unique features such as a calibrated wide linear gain range over the entire bandwidth combined with a very high frequency stability.
Features of the FRC0720 Downconverter
- Highest signal quality
- High flexibility
- High gain
- Ultra fine L-band frequency resolution
- Very high frequency stability
- High linearity over the entire bandwidth
- Low noise figure
- Switchable spectrum inversion
Description
The FRC0730 is a high performance synthesized up- and downconverter designed for a wide range
of broadcast, telco and IP satellite applications. In its default configuration, the FRC0730 upconverts
IF signals (70 or 140 MHz) to L-band (950–2150 MHz) and simultaneously downconverts L-band
signals (950–2150 MHz) to IF. Optionally, the FRC0730 can upconvert IF signals to C, Ku or DBS-band.
The FRC0730 offers some advanced and unique features such as a calibrated high linearity over the
entire bandwidth combined with a very high frequency stability. These features make the FRC0730
the perfect solution for a wide range of transmissions ranging from very small carriers to full
transponder applications. The IF frequency is switchable from 70 MHz to 140 MHz and the L-band
frequency is adjustable in steps of 48 Hz.
The high output frequency stability is provided by an internal 10 MHz reference clock. For
applications requiring a very high frequency stability, such as very low data rate carriers, an optional
0.01 ppm stability reference clock can be ordered separately.
A switchable DC power supply and a reference frequency on the L-band output are also available as
options, providing a compact and cost effective solution when the FRC0730 is used in combination
with an outdoor RF Upconverter and/or amplifier.
Optionally, an LNB power supply, a frequency band selection signal and a 10 MHz reference
frequency can be delivered to an LNB via the L-band input.
The FRC0730 is easy to operate and monitor. All control and monitoring parameters are available
locally on the front panel and remotely through a web interface. It is also possible to control or
monitor the FRC0730 via RMCP or SNMP.
The FRC0730 is also available as a stand-alone upconverter (model number FRC0710) or as a
stand-alone downconverter (model number FRC0720).
Data sheet:
https://www.idirect.net/wp-content/uploads/2020/03/ProductSheet-FRC-0710-0720-0730-FreqencyConverters.pdf
Download Name | |
FRC0720 Downconverter Data Sheet |