ETL Systems
ETL Systems NGM-102 Enigma Extended L-band Matrix (Downlink) 32 X 32 With –5 Db to +5db Variable Gain Settable Per Output
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
NGM-102 Enigma is a distributive (full fan-out) L-band (850-2450 MHz) Matrix, with a module/card capacity of 32 inputs x 32 outputs in a 6U 19" rack enclosure. It provides ultra resilience with single input and output cards, and can be part populated and expanded in single increments.
–5 dB to +5dB variable gain is provided and settable per output. Minimal impact from failure with hot-swap single input and output RF cards, dual redundant power supplies, CPU’s and fans.
The new extended L-band matrix (850-2450 MHz) is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity. The extended bandwidth of the Enigma Matrix is also suitable for HTS applications.
Now in its 4th generation, the Enigma L-band Matrix has proved to have genuinely high performance with excellent flatness or frequency response, excellent isolation, and linearity - a truly leading edge L-band Router. The Enigma L-band Switch matrix can also be incorporated into an overall automatic redundancy Network Management System to enhance the resilience of the overall earth station equipment.
Key benefits
- Simple 'plug & go' installation
- Expansion of RF Matrix to 512 x 512
- Continuous on-board monitoring and reporting of RF card amplifier status, CPU and PSU status and HMI communications
- Reliability in service with hot-swappable active components
- All settings are retained after a communications/power failure
- Capacitive touchscreen with remote connection via RS232/485 serial and RJ45 Ethernet ports
- Web Browser interface is provided as standard with the Enigma L-band Switch Matrix
- Extended bandwidth suitable for HTS applications
- Secure communications with SNMPv3 & HTTPS
Typical Applications
- Live news & sport traffic
- Satellite communications applications in teleport's and ground stations
- Signal monitoring of satellite traffic
- RF content acquisition for TVRO & IPTV head ends
- Remote controlled unmanned satcoms sites
- Test environment applications such as lab resource testing, net mobility testing & large scale wireless testing
Non blocking this means any input can be routed to any output
Full fan-out matrix (or fully distributive or splitting matrix) any input can be routed to any output. One input can be routed to many outputs Each output can only have one input. Tends to be more RX.
The Enigma Matrix has a full capacity of 32 inputs x 32 outputs, but can be supplied part-populated in single input / output increments - such as 15x25 or 32x16. It can then be hot expanded to 32x32. Larger systems can be made using multiple (Enigma) modules with system splitters and / or combiners – such as 32x64 or 32x128 up to a maximum of 512x512.
We also have modules with other capacities - please see;
Victor Matrix - Up to 16 input x 16 output (populated in increments of 4)
Hurricane Matrix - up to 64 inputs x 64 outputs (populated by increments of 8)
Vortex Matrix - Up to 64 inputs x 64 outputs (populated in increments of 16)
Vulcan Matrix - Up to 128 inputs x 128 outputs (populated in increments of 8)
Connector Type | Model No. |
---|---|
50 Ohm SMA
|
NGM-102-S5S5
|
50 Ohm BNC
|
NGM-102-B5B5
|
75 Ohm BNC
|
NGM-102-B7B7
|
75 Ohm F-type
|
NGM-102-F7F7
|
NGM-102 Enigma is a distributive (full fan-out) L-band (850-2450 MHz) Matrix, with a module/card capacity of 32 inputs x 32 outputs in a 6U 19" rack enclosure. It provides ultra resilience with single input and output cards, and can be part populated and expanded in single increments.
–5 dB to +5dB variable gain is provided and settable per output. Minimal impact from failure with hot-swap single input and output RF cards, dual redundant power supplies, CPU’s and fans.
The new extended L-band matrix (850-2450 MHz) is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity. The extended bandwidth of the Enigma Matrix is also suitable for HTS applications.
Now in its 4th generation, the Enigma L-band Matrix has proved to have genuinely high performance with excellent flatness or frequency response, excellent isolation, and linearity - a truly leading edge L-band Router. The Enigma L-band Switch matrix can also be incorporated into an overall automatic redundancy Network Management System to enhance the resilience of the overall earth station equipment.
Key benefits
- Simple 'plug & go' installation
- Expansion of RF Matrix to 512 x 512
- Continuous on-board monitoring and reporting of RF card amplifier status, CPU and PSU status and HMI communications
- Reliability in service with hot-swappable active components
- All settings are retained after a communications/power failure
- Capacitive touchscreen with remote connection via RS232/485 serial and RJ45 Ethernet ports
- Web Browser interface is provided as standard with the Enigma L-band Switch Matrix
- Extended bandwidth suitable for HTS applications
- Secure communications with SNMPv3 & HTTPS
Typical Applications
- Live news & sport traffic
- Satellite communications applications in teleport's and ground stations
- Signal monitoring of satellite traffic
- RF content acquisition for TVRO & IPTV head ends
- Remote controlled unmanned satcoms sites
- Test environment applications such as lab resource testing, net mobility testing & large scale wireless testing
Non blocking this means any input can be routed to any output
Full fan-out matrix (or fully distributive or splitting matrix) any input can be routed to any output. One input can be routed to many outputs Each output can only have one input. Tends to be more RX.
The Enigma Matrix has a full capacity of 32 inputs x 32 outputs, but can be supplied part-populated in single input / output increments - such as 15x25 or 32x16. It can then be hot expanded to 32x32. Larger systems can be made using multiple (Enigma) modules with system splitters and / or combiners – such as 32x64 or 32x128 up to a maximum of 512x512.
We also have modules with other capacities - please see;
Victor Matrix - Up to 16 input x 16 output (populated in increments of 4)
Hurricane Matrix - up to 64 inputs x 64 outputs (populated by increments of 8)
Vortex Matrix - Up to 64 inputs x 64 outputs (populated in increments of 16)
Vulcan Matrix - Up to 128 inputs x 128 outputs (populated in increments of 8)
Connector Type | Model No. |
---|---|
50 Ohm SMA
|
NGM-102-S5S5
|
50 Ohm BNC
|
NGM-102-B5B5
|
75 Ohm BNC
|
NGM-102-B7B7
|
75 Ohm F-type
|
NGM-102-F7F7
|