CPI
CPI QuadMod 400 W SSPA C-Band - MPCD6400Q
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
Frequency Range (GHz) | Saturated Power (Psat) | P1dB (W) | Linear Power (W) |
5.850 to 6.425 | 400 | 316 | 158 |
Built for Satellite Communications Uplinks QuadMod SSPAs are completely modular RF amplifier systems that offer output powers of up to 800 watts in C Band, 700 watts in X-Band, or 400 watts in Ku-Band. Based on patented technology used in our field proven ModuMAX amplifiers, QuadMod SSPAs utilize hot-swappable RF modules, power supplies and electronic assemblies to maximize performance and minimize downtime.
Parallel Architecture Solid-state power amplifiers (SSPAs) consist of multiple transistors in parallel, and naturally contain a degree of built-in redundancy. Utilizing multiple+ RF modules, power supply modules and cooling fans, QuadMod SSPAs are extremely reliable and fault-tolerant.
RF Plug-In Modules QuadMod SSPAs consist of four identical and fully inter-changeable RF plug-in modules. Module status is indicated by an LED on each module as well as the control panel display. Complete failure of a module causes a drop of only 2.5 dB in output power, without the momentary loss of signal caused by redundant switchover systems. Defective modules can be hot-swapped while the SSPA continues to operate. Spare RF modules are affordable, since they contain only a fraction of the RF power transistors in the SSPA
FEATURES:
• Modular architecture
• Three year all-inclusive warranty
• Worldwide service
• Proven reliability
POWER AND FREQUENCI E S :
• C-Band
1500 watts
800 watts
500 watts
400 atts
• X-Band
1250 watts
700 watts
400 watts
Frequency Range (GHz) | Saturated Power (Psat) | P1dB (W) | Linear Power (W) |
5.850 to 6.425 | 400 | 316 | 158 |
Built for Satellite Communications Uplinks QuadMod SSPAs are completely modular RF amplifier systems that offer output powers of up to 800 watts in C Band, 700 watts in X-Band, or 400 watts in Ku-Band. Based on patented technology used in our field proven ModuMAX amplifiers, QuadMod SSPAs utilize hot-swappable RF modules, power supplies and electronic assemblies to maximize performance and minimize downtime.
Parallel Architecture Solid-state power amplifiers (SSPAs) consist of multiple transistors in parallel, and naturally contain a degree of built-in redundancy. Utilizing multiple+ RF modules, power supply modules and cooling fans, QuadMod SSPAs are extremely reliable and fault-tolerant.
RF Plug-In Modules QuadMod SSPAs consist of four identical and fully inter-changeable RF plug-in modules. Module status is indicated by an LED on each module as well as the control panel display. Complete failure of a module causes a drop of only 2.5 dB in output power, without the momentary loss of signal caused by redundant switchover systems. Defective modules can be hot-swapped while the SSPA continues to operate. Spare RF modules are affordable, since they contain only a fraction of the RF power transistors in the SSPA
FEATURES:
• Modular architecture
• Three year all-inclusive warranty
• Worldwide service
• Proven reliability
POWER AND FREQUENCI E S :
• C-Band
1500 watts
800 watts
500 watts
400 atts
• X-Band
1250 watts
700 watts
400 watts
Download Name | |
CPI QuadMod SSPA Systems Data Sheet |