Zoom the image with the mouse
Radeus Labs
Radeus Labs 3400-L L-Band Beacon Tracking Receiver
Product Code:
3400-L
Condition:
New
Weight:
1.00 KGS
Width:
48.26
(cm)
Height:
4.45
(cm)
Depth:
40.64
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
The Model 3400-L Version 1Q01 is the latest release of our reliable series of 3400 Beacon Receivers. With Version 1Q01 firmware we now offer the full L-band range of 930 to 2300 MHz, Digital level reference setting, ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. Frequency selection on 1 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels.
- Digital level reference setting, -40 to -100 dBm in 0.5 dB steps
- Ethernet connectivity with M&C control interface (serial over ethernet)
- RS-232/422/485 and Ethernet all Standard
- Temperature stabilization compensation
The output of the Beacon Receiver is a DC voltage proportional to the input signal level to be used for both antenna tracking control and automatic uplink power control. A loss-of-carrier indicator is provided in the event the tracking signal is lost. Form “C” relay contacts provide an external loss-of-carrier alarm. A front panel LCD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.
| Specifications | |
| Input Frequency | 930 - 2300 MHz (2) |
| Input Level | -40 to -100 dBm typical |
| Level Adjust | Digital, 0.5 dB steps |
| Level Accuracy | ±4 dB over entire range |
| Tracking Slope | 0.5 V/dB |
| Tracking Linearity | ±0.25 dB |
| Frequency Selection | 1 kHz steps |
| Min. Input Level for Lock | -110 dBm |
| Input Connector | Type “N” Female, 50 ohm (1) |
| Threshold | 4 dB C/N for acquisition < 1 dB C/N for carrier lock |
| Tracking Response | 0 to +10 VDC over 20 dB input range standard |
| Alarms | Form-C relay contacts |
| AFC | ±25 kHz (3) |
| Pre-Detection Bandwidth | 50 kHz (3) |
| M&C Connector | DB-9 Female & RJ-45 |
| Connector | Ethernet 10/100 Base T |
| MECHANICAL: | |
| Output Connector | Modular Socket & Plug (for ACU and UPC) |
| Dimensions | 1 RU, 19” x 16” x 1.75” |
| POWER: | |
| Prime Input Power | 90-260 VAC, 47-63 Hz, Auto-sensing, 45 Watts max |
| LNB Power | +24 Volts @ 0.3 Amp available on center conductor. Selectable In/Out (4) |
| For additional options, contact customer service: (1) Other Input Connectors (2) Other Ranges Available (3) Other Bandwidth Options (4) Other Power Options |
|
5 customers are viewing this product
Details
The Model 3400-L Version 1Q01 is the latest release of our reliable series of 3400 Beacon Receivers. With Version 1Q01 firmware we now offer the full L-band range of 930 to 2300 MHz, Digital level reference setting, ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. Frequency selection on 1 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels.
- Digital level reference setting, -40 to -100 dBm in 0.5 dB steps
- Ethernet connectivity with M&C control interface (serial over ethernet)
- RS-232/422/485 and Ethernet all Standard
- Temperature stabilization compensation
The output of the Beacon Receiver is a DC voltage proportional to the input signal level to be used for both antenna tracking control and automatic uplink power control. A loss-of-carrier indicator is provided in the event the tracking signal is lost. Form “C” relay contacts provide an external loss-of-carrier alarm. A front panel LCD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.
| Specifications | |
| Input Frequency | 930 - 2300 MHz (2) |
| Input Level | -40 to -100 dBm typical |
| Level Adjust | Digital, 0.5 dB steps |
| Level Accuracy | ±4 dB over entire range |
| Tracking Slope | 0.5 V/dB |
| Tracking Linearity | ±0.25 dB |
| Frequency Selection | 1 kHz steps |
| Min. Input Level for Lock | -110 dBm |
| Input Connector | Type “N” Female, 50 ohm (1) |
| Threshold | 4 dB C/N for acquisition < 1 dB C/N for carrier lock |
| Tracking Response | 0 to +10 VDC over 20 dB input range standard |
| Alarms | Form-C relay contacts |
| AFC | ±25 kHz (3) |
| Pre-Detection Bandwidth | 50 kHz (3) |
| M&C Connector | DB-9 Female & RJ-45 |
| Connector | Ethernet 10/100 Base T |
| MECHANICAL: | |
| Output Connector | Modular Socket & Plug (for ACU and UPC) |
| Dimensions | 1 RU, 19” x 16” x 1.75” |
| POWER: | |
| Prime Input Power | 90-260 VAC, 47-63 Hz, Auto-sensing, 45 Watts max |
| LNB Power | +24 Volts @ 0.3 Amp available on center conductor. Selectable In/Out (4) |
| For additional options, contact customer service: (1) Other Input Connectors (2) Other Ranges Available (3) Other Bandwidth Options (4) Other Power Options |
|
Download
| Download Name | |
| Radeus Labs 3400-L Datasheet | |
| Radeus Labs 3400-L Manual | |
Related Products
