Intellian Fiber Link, Module integrated ACU

VSAT Fiber Link Solution
Exclusively designed for Intellian VSAT systems, although can be used with other VSAT systems, this two module solution is designed for customers who demand simple installation, reduced signal loss, and cable runs of more than 100 meters.
A Single Fiber Optic Cable
A single fiber optic cable connects the VSAT antenna to the BDU, reducing the number of cables required, making installation more straightforward.
No Cable Run Limitations
With less signal loss than Coax cable, and much lighter, there is no cable run length limitations. No measurable signal loss up to 2000 meters.
Reduces Installation Time
A single cable, saves time and reduces weight of the installation. Fiber Link with an integrated ACU available
Intellian offers an advanced VSAT ACU that combines the Fiber Link BDU and ACU into one unit! This option makes it even easier to install and operate.

VSAT Fiber Link Solution
This solution has been designed exclusively for Intellian v100, v100Ka, v100GX, GX100, v130G, v240C, v240K and v240M systems, although can be used with other non-Intellian VSAT systems. The Fiber Link System consists of an ADU module and BDU module connected by Fiber cable. The ADU module is a small unit mounted inside the bottom of the Radome that is connected to the rack mountable BDU module. The BDU is available either as a standalone Fiber Link module or integrated within the ACU on select VSAT systems.

Technical Specifications
Mechanical Specification Fiber Link VSAT
Above Deck Unit Size (inside antenna) 27cm x 17cm x 3.6cm / 10.63” x 6.69” x 1.41”
Above Deck Unit Weight (inside antenna) 1.5Kg / 3.3lbs
Below Deck Module Size (19 inch rack) 43.1cm x 38cm x 4.44cm / 16.96” x 14.96” x
1.74”
Below Deck Module Weight (19 inch rack) 3.1Kg / 6.83lbs (Integrated ACU : 4kg / 8.82Ibs)
Optical Specification
Frequency Range 10MHz~2.2GHz
Link Gain 0dB typ. (±4dB)
Link Gain Ripple (any 36MHz) ±1dB (typical)
Gain Stability (dB/24hr@room temp.) ±0.25dB (typical)
Output IP3 +36dBm
Input / Output Impedance 50ohm
Connector Type FC/APC
Recommended Fiber Mode Single Mode
Electrical Specification
Supply Voltage 110/220V AC
Max Power Rating (ADU) 15W max.
Max Power Rating (BDU) 15W max.

Part Number Model Description
FO-1V10
VSAT Fiber Link
Compatible Models: v100, v100GX, GX100, v100Ka,
v240C, v240K, v240M
FO-1V12
VSAT Fiber Link for v130G
Compatible Models: v130G
FO-1V40
Intellian Fiber Link System w/ an Integrated ACU
Compatible Models: v100, v100GX, v100Ka, v240C,
v240K, v240M