Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
The WR-ZEN TP-FL is the fundamental standalone node that provides White Rabbit features to a wide range of applications making use of its redundant connections. The WR-ZEN TP-FL easily distributes time and frequency to other equipment by implementing widely available timing protocols: PTP, NTP, 10MHz/PPS.
The WR-ZEN TP-FL combines ultra-stable clocks with low jitter and temperature compensated clock resources to enhance its synchronization accuracy in a cost-effective 1U form factor.
ADVANTAGES
Sub Nano Second Time Accuracy
With less than a billionth of a second of accuracy compared to a master reference clock, the White Rabbit Time Distribution products provide you with ultra precise synchronization.
Timing Over Fiber Optic Cabling
With the ability to connect devices using fiber optic cables, White Rabbit timing distribution products enable you to transfer time information at a sub-nano second level – both in Local Area Networks (LAN), Wide Area Networks (WAN) and across large distances.
Interoperability In Last Hop
Placed typically as interface node in a WR network, the WR-ZEN TP FL can distribute standard PTP IEEE 1588-2008 for the last hop through using the most common profiles such as Telecoms profiles (G.8265.1, G.8275.1) & Power profiles ((IEEE C37.238-2011 and IEEE/IEC 61850-9- 3 ). It also provides NTP interoperability and flexible 10MHz/PPS/IRIG distribution via its SMA ports and optional expansion cards.
FEATURES
Sub-nanosecond time accuracy
WR, PTPv2, and NTP over optical interfaces
Extended management and monitoring
Distance range over 80 km using fiber.
Seamless failover mechanisms & Holdover
Robustness & Redundancy
Low jitter/phase noise frequency dissemination
Precise timing sources monitoring capability
Configurable timing outputs (1PPS/10MHz/IRIG-B) via expansion modules
SPECS
Size: 444 x 43 x 221 mm
Environmental Conditions
Temperature: -10ºC – +50ºC
Humidity: 0% ~ 90% RH
TIMING & FRONT PANEL
Ethernet
2x 10/100/1000 Base-T RJ45 (Management, NTP)
SFP Ports
2x 1GbE (WR, PTP, NTP)
Clocks I/O
5xSMA coaxial connectors (3V/50Ω):
10 MHz SIN OUT
CLK OUT(LVTTL)
PPS OUT (LVTTL)
PPS IN (LVTTL)
10MHz IN (TTL/CMOS/ ECL/clipped sine)
LCD
Information panel for alerts & network configuration
The WR-ZEN TP-FL is the fundamental standalone node that provides White Rabbit features to a wide range of applications making use of its redundant connections. The WR-ZEN TP-FL easily distributes time and frequency to other equipment by implementing widely available timing protocols: PTP, NTP, 10MHz/PPS.
The WR-ZEN TP-FL combines ultra-stable clocks with low jitter and temperature compensated clock resources to enhance its synchronization accuracy in a cost-effective 1U form factor.
ADVANTAGES
Sub Nano Second Time Accuracy
With less than a billionth of a second of accuracy compared to a master reference clock, the White Rabbit Time Distribution products provide you with ultra precise synchronization.
Timing Over Fiber Optic Cabling
With the ability to connect devices using fiber optic cables, White Rabbit timing distribution products enable you to transfer time information at a sub-nano second level – both in Local Area Networks (LAN), Wide Area Networks (WAN) and across large distances.
Interoperability In Last Hop
Placed typically as interface node in a WR network, the WR-ZEN TP FL can distribute standard PTP IEEE 1588-2008 for the last hop through using the most common profiles such as Telecoms profiles (G.8265.1, G.8275.1) & Power profiles ((IEEE C37.238-2011 and IEEE/IEC 61850-9- 3 ). It also provides NTP interoperability and flexible 10MHz/PPS/IRIG distribution via its SMA ports and optional expansion cards.
FEATURES
Sub-nanosecond time accuracy
WR, PTPv2, and NTP over optical interfaces
Extended management and monitoring
Distance range over 80 km using fiber.
Seamless failover mechanisms & Holdover
Robustness & Redundancy
Low jitter/phase noise frequency dissemination
Precise timing sources monitoring capability
Configurable timing outputs (1PPS/10MHz/IRIG-B) via expansion modules
SPECS
Size: 444 x 43 x 221 mm
Environmental Conditions
Temperature: -10ºC – +50ºC
Humidity: 0% ~ 90% RH
TIMING & FRONT PANEL
Ethernet
2x 10/100/1000 Base-T RJ45 (Management, NTP)
SFP Ports
2x 1GbE (WR, PTP, NTP)
Clocks I/O
5xSMA coaxial connectors (3V/50Ω):
10 MHz SIN OUT
CLK OUT(LVTTL)
PPS OUT (LVTTL)
PPS IN (LVTTL)
10MHz IN (TTL/CMOS/ ECL/clipped sine)
LCD
Information panel for alerts & network configuration
