Zoom the image with the mouse
ETI
ETI EDH-4 Air Dehydrator
Product Code:
18021
Condition:
New
Weight:
3.54 KGS
Width:
29.50
(cm)
Height:
13.30
(cm)
Depth:
17.80
(cm)
$2,650.00
The EDH–4 dehydrator addresses the need for a low volume, non-regenerating air dehydrator for automatically pressurizing small volume waveguides and coax. It is especially suited for C, X, Ku, and Ka band applications.
The output pressure is 0.87 psig (59.9 mbar) with a maximum flow rate of 6.0 scfh (2.8 lpm). It is intended for use in systems smaller than 18 cubic feet (510 liters).
The EDH–4 indicates pressure and status on a bright red LED display. Display parameters are user selectable in English or SI units.
A cut out in the front panel allows for easy inspection of the color indicating desiccant, which begins bright orange when dry and transitions to white over time. Additionally, the dehydrator will alarm after a preset number of compressor hours to indicate that the desiccant should be inspected and possibly changed.
When the time comes to change the desiccant, the front panel is easily opened exposing the desiccant canister and allowing for simple removal for replacement, or optionally, manual regeneration. No special tools are required.
FEATURES
- Provides cost effective dry air at 0.5 psig (34.5 mbar)
- Prevents vapor, dust, and small particles from entering small systems
- Improves transmission reliability by protecting against reflection
- Dry, clean, positive pressure extends equipment lifetime
- International capability
- 100-240 VAC with 50/60 Hz operation
- Automatic System Pressurization
- Selectable English or SI calibration
- Simple to install and operate
- Brackets supplied for rack mounting, wall mounting, and feet for shelf or bench top use
- Convenient front panel access for easy replacement of desiccant canister
- Low energy usage
- Quiet
5 customers are viewing this product
Details
The EDH–4 dehydrator addresses the need for a low volume, non-regenerating air dehydrator for automatically pressurizing small volume waveguides and coax. It is especially suited for C, X, Ku, and Ka band applications.
The output pressure is 0.87 psig (59.9 mbar) with a maximum flow rate of 6.0 scfh (2.8 lpm). It is intended for use in systems smaller than 18 cubic feet (510 liters).
The EDH–4 indicates pressure and status on a bright red LED display. Display parameters are user selectable in English or SI units.
A cut out in the front panel allows for easy inspection of the color indicating desiccant, which begins bright orange when dry and transitions to white over time. Additionally, the dehydrator will alarm after a preset number of compressor hours to indicate that the desiccant should be inspected and possibly changed.
When the time comes to change the desiccant, the front panel is easily opened exposing the desiccant canister and allowing for simple removal for replacement, or optionally, manual regeneration. No special tools are required.
FEATURES
- Provides cost effective dry air at 0.5 psig (34.5 mbar)
- Prevents vapor, dust, and small particles from entering small systems
- Improves transmission reliability by protecting against reflection
- Dry, clean, positive pressure extends equipment lifetime
- International capability
- 100-240 VAC with 50/60 Hz operation
- Automatic System Pressurization
- Selectable English or SI calibration
- Simple to install and operate
- Brackets supplied for rack mounting, wall mounting, and feet for shelf or bench top use
- Convenient front panel access for easy replacement of desiccant canister
- Low energy usage
- Quiet
