VersaPNT

The VersaPNT combines a GNSS receiver, inertial measurement technology and high-performance timing oscillators to provide Assured PNT in GNSS-degraded and denied environments. This rugged and highly customizable device serves as a navigation system, master clock and network time server for mobile applications in harsh environmental conditions.

This rugged and highly customizable device combines a GNSS receiver, inertial measurement technology and high-performance timing oscillators to provide Assured PNT in GNSS-degraded and denied environments.

VersaPNT minimizes size, weight and power (SWaP) by combining PNT functions normally achieved through multiple independent subsystems, allowing for efficient integration into a myriad of ground, air and maritime platforms.

ADVANTAGES

Accurate In All Conditions

With Multi-Constellation GNSS capability – including an optional GPS SAASM – the VersaPNT provides you a high-performance time base and inertial sensor to manage timing and navigation, even in GNSS-denied environments. And with GNSS spoofing and jamming detection, the VersaPNT will continue to provide accurate timing and navigation data in all conditions.

VersaPNT – Flexible

The VersaPNT is highly versatile with software configurable inputs and outputs, network synchronization, set-up and management, and compatible with external IMUs. Moreover, the VersaPNTs small SWaP allows for easy integration into any vehicle and airframe platforms.

Compact/Rugged

The VersaPNT is designed to withstand intense motion and harsh environments: Ruggedized – MIL-STD–810G, MIL-STD-461F, IP 65. The VersaPNT is field-proven with shock and vibration resistant capabilities.

FEATURES

• GNSS-aided inertial navigation and timing
• Embedded jamming and spoofing detection
• Configurable for multiple vehicle and airframe platforms
• High performance internal time base and inertial sensor to manage potential GNSS loss
• GNSS time and frequency source with NTP/PTP time server
• Ability to integrate future PNT signal sources such as CAN Bus.
• High versatility with software-configurable inputs/outputs
• Network sync, set up and management
• Easy integration, with small footprint and low power consumption
• Compatible with external IMUs
• Victory compatible
• Measurement data is logged internally and streamed through a serial or LAN interface
• Ruggedized (MIL-STD-810G) low size, weight and power
• Conduction-cooled
• Mil-performance connectors
• Standby power mode

SPECS

• Operational Readiness
  • 1PPS time of day available (hot start)
  • 60 s: 1ms accuracy to UTC
  • 200 s: 1µs accuracy to UTC
• Physical
  • Size (WxHxD): 5.8” x 2.5” x 5.0” (147.3 x 127.5 x 63.0 mm) VITA 75 compliant
  • Weight: 1.0 kg (2.2 lbs)
  • Mounting: On a plate, optimized for conduction cooling, 6 through holes
• Power
  • Input Voltage: 10-32 VDC
  • Typical Power Draw: <25 W (with OCXO)
  • Standby mode (only oscillator is powered): 0.4 W, DC power supply must be within 10 – 32 VDC
• Environmental
  • Tested to MIL-STD-810G CH1
  • Temperature, in operation: -40°C to +71°C with
  • OCXO (-10°C to +45°C with mRO-50)
  • Mounting plate temperature, in storage: -45°C to
  • +85°C
  • Humidity: 95% RH, non-condensing
  • Altitude: 45,000 ft
  • Environmental Protection: IP 65
  • Vibration MIL-STD-810G CH1 Method 514.7,
  • Categories 12,13,14,20,21,24
  • Shock: 20 g, 11 ms, sawtooth