RevGo
RevGo RGUC-U1250-ACREN-CP Block Up-Converter (BUC) Ku-Band 250W 14.0 - 14.5 GHz, External
Product Code:
RGUC-U1250-ACREN-CP
Condition:
New
Weight:
30.86 KGS
Width:
32.00
(cm)
Height:
20.00
(cm)
Depth:
22.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
About the CONVERTER
The RGUC-U1250-ACREN-CP is a RevGo RF unit operating in Ku-Band, with an output range of 14.00 - 14.50 GHz and 250W of rated output power. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Output Frequency | Ku-Band: 14.00 - 14.50 GHz |
| Output Power | 250W |
| Reference | External reference 10MHz |
| OpenBmip | Without openBmip calibration tables |
RF Specifications
| RF Frequency | Standard: 14.00-14.50 MHz |
| IF Frequency | 950-1450 MHz |
| Reference - External | 10 MHz, 0 ± 5 dBm |
| Reference - Internal (optional) | LO stability: ±8 ppb Freq. accuracy ±300ppb |
| Output Power - Rated/Saturated | 54 dBm |
| Output Power - PLin1 | 53 dBm |
| Output Power - PLin2 | 52 dBm |
| Output Power - PLin3 | 51dBm |
| IMD3 (3dB from rated) | - 25 dBc |
| Small Signal Gain | 75 dB |
| Gain Variation | 1 dB p-p / 36 MHz 3 dB p-p / 500 MHz 4 dB p-p / 750 MHz |
| Gain stability | 3 dB p-p |
| Gain Adjustment | 20 dB (Step: 0.1 dB) |
| TX noise density | -76 dBm/Hz @max gain |
| RX noise density | -156 dBm/Hz |
| Phase Noise | -65 dBc / Hz @ 100 Hz -75 dBc / Hz @ 1 KHz -85 dBc / Hz @ 10 KHz -95 dBc / Hz @ 100 KHz |
| Output Spurious | -60 dBc |
| Notes | PLin1: -26 dBc regrowth, 1.5 SR (commercial satellite) PLin2: -30 dBc regrowth, 1.0 SR (MIL-STD-188-164B, one-carrier) PLin3: <-25 dBc IMD3 (MIL-STD-188-164B, two-carrier) |
Power Supply
| Input Power | 85 to 265 VAC (47-63 Hz) |
| @ PLin3 Output | 950 W |
| @ Rated Output | 1300 W |
Interfaces
| RF Output Connector | WR75-G (Grooved) |
| RF Output VSWR | 1.25:1 |
| IF Connector | N-Type Female |
| IF Input VSWR | 1.5:1 |
| Power Connector | ACS02E-14S-7P |
| M&C Connector | PT02E-14-19P (RS232/485/Eth) SNMPv2 |
| Redundancy Connector | PT02E-12-14S |
| Alarm Status Indicator | LED (green/red) |
Physical Parameters
| Size (inches) | 12.59*8.66*7.87 320*220*200 mm |
| Weight (lbs) | 30.86 14 kg |
| Operating Temperature | -40 to +60 °C |
| Humidity | 0-100% (condensing) |
| Altitude | 0-10,000 feet ASL |
5 customers are viewing this product
Details
About the CONVERTER
The RGUC-U1250-ACREN-CP is a RevGo RF unit operating in Ku-Band, with an output range of 14.00 - 14.50 GHz and 250W of rated output power. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Output Frequency | Ku-Band: 14.00 - 14.50 GHz |
| Output Power | 250W |
| Reference | External reference 10MHz |
| OpenBmip | Without openBmip calibration tables |
RF Specifications
| RF Frequency | Standard: 14.00-14.50 MHz |
| IF Frequency | 950-1450 MHz |
| Reference - External | 10 MHz, 0 ± 5 dBm |
| Reference - Internal (optional) | LO stability: ±8 ppb Freq. accuracy ±300ppb |
| Output Power - Rated/Saturated | 54 dBm |
| Output Power - PLin1 | 53 dBm |
| Output Power - PLin2 | 52 dBm |
| Output Power - PLin3 | 51dBm |
| IMD3 (3dB from rated) | - 25 dBc |
| Small Signal Gain | 75 dB |
| Gain Variation | 1 dB p-p / 36 MHz 3 dB p-p / 500 MHz 4 dB p-p / 750 MHz |
| Gain stability | 3 dB p-p |
| Gain Adjustment | 20 dB (Step: 0.1 dB) |
| TX noise density | -76 dBm/Hz @max gain |
| RX noise density | -156 dBm/Hz |
| Phase Noise | -65 dBc / Hz @ 100 Hz -75 dBc / Hz @ 1 KHz -85 dBc / Hz @ 10 KHz -95 dBc / Hz @ 100 KHz |
| Output Spurious | -60 dBc |
| Notes | PLin1: -26 dBc regrowth, 1.5 SR (commercial satellite) PLin2: -30 dBc regrowth, 1.0 SR (MIL-STD-188-164B, one-carrier) PLin3: <-25 dBc IMD3 (MIL-STD-188-164B, two-carrier) |
Power Supply
| Input Power | 85 to 265 VAC (47-63 Hz) |
| @ PLin3 Output | 950 W |
| @ Rated Output | 1300 W |
Interfaces
| RF Output Connector | WR75-G (Grooved) |
| RF Output VSWR | 1.25:1 |
| IF Connector | N-Type Female |
| IF Input VSWR | 1.5:1 |
| Power Connector | ACS02E-14S-7P |
| M&C Connector | PT02E-14-19P (RS232/485/Eth) SNMPv2 |
| Redundancy Connector | PT02E-12-14S |
| Alarm Status Indicator | LED (green/red) |
Physical Parameters
| Size (inches) | 12.59*8.66*7.87 320*220*200 mm |
| Weight (lbs) | 30.86 14 kg |
| Operating Temperature | -40 to +60 °C |
| Humidity | 0-100% (condensing) |
| Altitude | 0-10,000 feet ASL |