Zoom the image with the mouse
RevGo
RevGo RGTR-A110-8A01-CMXN-D0 Satellite Transceiver Ka-Band 10W 17.8 - 20.2 GHz
Product Code:
RGTR-A110-8A01-CMXN-D0
Condition:
New
Weight:
1.40 KGS
Width:
15.00
(cm)
Height:
5.80
(cm)
Depth:
14.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
About the TRANSCEIVER
The RGTR-A110-8A01-CMXN-D0 is a RevGo transceiver operating in Ka-Band, with an N-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ka-Band |
| IF Connector | N-Connector |
| Input RF Frequency | 17.80-20.20 GHz |
Tx Specifications
| Tx RF Frequency | 29.00-30.00 GHz |
| IF Input Frequency | 1400-2400 MHz |
| LO Frequence [GHz] | 27.60 GHz |
| External Reference | 10 MHz, 0±5 dBm |
| Output Power | 10W |
| Rated/Saturated | 40 dBm |
| Plin1 | 39 dBm |
| Plin2 | 37 dBm |
| Small Signal Gain | 65 dB (50-65 dB, Step by 0.25 dB) |
| Gain Flatness | 3 dB p-p/500 MHz 4 dB p-p/1000 MHz |
| Gain stability | 3 dB p-p |
| Phase Noise | ≤ -60 dBc/Hz @100 Hz ≤ -73 dBc/Hz @1 KHz ≤ -83 dBc/Hz @10 KHz ≤ -93 dBc/Hz @100 KHz |
| Output Spurious | -55 dBc |
Rx Specifications
| Rx Frequency | Quad-band (4 LOs): 17.70-18.70 GHz, 18.45-19.45 GHz, 19.20-20.20 GHz Dual-Band (2 LOs): 18.20-20.20 GHz, 19.20-21.20 GHz, (optional) |
| Output Frequency | 950-1950 MHz/950-2150 MHz |
| LO Frequency | 16.75/17.5/18.25/19.25 GHz(For Quad-band) |
| switched by M&C | 17.25/18.25 GHz(For Dual-band) 18.25/19.25 GHz (For Dual-band) |
| LO Stability | ±1 ppm (Internal Ref) |
| Noise Figure | 1.5 dB typ., 1.6 dB max.@20.2-21.2 GHz |
| P-1dB | 10 dB min. |
| Gain | 60 dB |
| Gain Flatness | 1 dB p-p / 36 MHz 5 dB p-p / 1000 MHz |
| Image Rejection | 30 dB typ. 20 dB @ 19.25 GHz |
| Phase Noise | ≤ -73 dBc/Hz @1 KHz ≤ -83 dBc/Hz @10 KHz ≤ -93 dBc/Hz @100 KHz |
Physical Parameters
| Size (inches) | 5.90*5.51*1.97 150x140x58 mm |
| Weight (lbs) | 3.08 1.4 kg |
| Operating Temp | -40 to +60 °C |
| Humidity | 0-100% (condensing) |
| Altitude | 0-10,000 feet ASL |
| protection | IP67 |
TX Power Supply
| Input Power | 18 - 55 VDC |
| Power Consumption | 10 W |
| Prated (including Fan) | 60 W typ. 70 W max |
RX Power Supply
| Input Power | +12 to +24 VDC (<15VDC, L-Band; >16VDC, H-Band) |
| Power Consumption | 6 W |
Interfaces
| IF Connector | N-Type |
| MS Connector | 4-Pin for Power supply |
| TE T4130012081-000 | 4-pin for M&C (RS422/RS485) |
5 customers are viewing this product
Details
About the TRANSCEIVER
The RGTR-A110-8A01-CMXN-D0 is a RevGo transceiver operating in Ka-Band, with an N-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ka-Band |
| IF Connector | N-Connector |
| Input RF Frequency | 17.80-20.20 GHz |
Tx Specifications
| Tx RF Frequency | 29.00-30.00 GHz |
| IF Input Frequency | 1400-2400 MHz |
| LO Frequence [GHz] | 27.60 GHz |
| External Reference | 10 MHz, 0±5 dBm |
| Output Power | 10W |
| Rated/Saturated | 40 dBm |
| Plin1 | 39 dBm |
| Plin2 | 37 dBm |
| Small Signal Gain | 65 dB (50-65 dB, Step by 0.25 dB) |
| Gain Flatness | 3 dB p-p/500 MHz 4 dB p-p/1000 MHz |
| Gain stability | 3 dB p-p |
| Phase Noise | ≤ -60 dBc/Hz @100 Hz ≤ -73 dBc/Hz @1 KHz ≤ -83 dBc/Hz @10 KHz ≤ -93 dBc/Hz @100 KHz |
| Output Spurious | -55 dBc |
Rx Specifications
| Rx Frequency | Quad-band (4 LOs): 17.70-18.70 GHz, 18.45-19.45 GHz, 19.20-20.20 GHz Dual-Band (2 LOs): 18.20-20.20 GHz, 19.20-21.20 GHz, (optional) |
| Output Frequency | 950-1950 MHz/950-2150 MHz |
| LO Frequency | 16.75/17.5/18.25/19.25 GHz(For Quad-band) |
| switched by M&C | 17.25/18.25 GHz(For Dual-band) 18.25/19.25 GHz (For Dual-band) |
| LO Stability | ±1 ppm (Internal Ref) |
| Noise Figure | 1.5 dB typ., 1.6 dB max.@20.2-21.2 GHz |
| P-1dB | 10 dB min. |
| Gain | 60 dB |
| Gain Flatness | 1 dB p-p / 36 MHz 5 dB p-p / 1000 MHz |
| Image Rejection | 30 dB typ. 20 dB @ 19.25 GHz |
| Phase Noise | ≤ -73 dBc/Hz @1 KHz ≤ -83 dBc/Hz @10 KHz ≤ -93 dBc/Hz @100 KHz |
Physical Parameters
| Size (inches) | 5.90*5.51*1.97 150x140x58 mm |
| Weight (lbs) | 3.08 1.4 kg |
| Operating Temp | -40 to +60 °C |
| Humidity | 0-100% (condensing) |
| Altitude | 0-10,000 feet ASL |
| protection | IP67 |
TX Power Supply
| Input Power | 18 - 55 VDC |
| Power Consumption | 10 W |
| Prated (including Fan) | 60 W typ. 70 W max |
RX Power Supply
| Input Power | +12 to +24 VDC (<15VDC, L-Band; >16VDC, H-Band) |
| Power Consumption | 6 W |
Interfaces
| IF Connector | N-Type |
| MS Connector | 4-Pin for Power supply |
| TE T4130012081-000 | 4-pin for M&C (RS422/RS485) |
Download
| Download Name | |
| RevGo Satellite Transceiver Ka-Band 10W Datasheet | |
Related Products
