Zoom the image with the mouse
RevGo
RevGo RGLN-U1A03N-A0 Low Noise Block (LNB) Ku-Band 10.95 - 11.7 GHz
Product Code:
RGLN-U1A03N-A0
Condition:
New
Weight:
0.24 KGS
Width:
9.40
(cm)
Height:
4.00
(cm)
Depth:
4.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
About the LNB
The RGLN-U1A03N-A0 is a RevGo low noise block downconverter (LNB) operating in Ku-Band, with an input range of 10.95 - 11.70 GHz and an N-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Input Frequency | Ku-Band: 10.95 - 11.70 GHz |
| IF Connector | N-Connector |
| Switched type | No Switched (Single band) & By voltage (Dual-band) |
| Power & Output interface | N-type (50 Ohm) |
RF Specifications
| Input Frequency - LO: 10.00 GHz | 10.95-11.70 GHz |
| Output Frequency - Single-band | 950-1700 MHz |
| Noise Figure | 0.8 dB typ., 1.0 dB max. |
| LO Stability | +/- 3 ppm |
| LO Leakage Level - IF connector | -30 dBm max. |
| LO Leakage Level - RF connector | -60 dBm max. |
| Conversion Gain | 60 dB |
| Output P1dB | 5 dBm min. |
| Phase Noise | -60 dBc/Hz @100 Hz, -70 dBc/Hz @1 KHz, -80 dBc/Hz @10 KHz, -90 dBc/Hz @100 KHz |
| Output Spurious | -55 dBc @ -10 dBm (IF output) |
Power Supply
| Input Power | Via IFL |
| Single-band | 12-24 VDC |
| Dual-band | 12-24 VDC |
| *Switched by voltage | +13 VDC L-Band (12-15 VDC) +18 VDC H-Band (16-24 VDC) *Switched by 22 KHz (optional) |
| OFF | L-Band |
| ON | H-Band |
| Power Consumption | 3 W |
Interfaces
| Input Connector | WR75-G (Grooved) |
| Input VSWR | 2.5:1 |
| Output Connector | N-type female (optinal) |
| Output VSWR | 2.0:1 |
Physical Parameters
| Dimensions | inch 3.70x1.57*1.57 94x40x40 mm |
| Weight | lbs 0.53 g 240 |
| Operating Temperature | -40 to +60 °C |
| Humidity | 0-100 % (Condensing) |
| Altitude | 0-10,000 feet ASL |
| Water-proof Class | IP65 |
5 customers are viewing this product
Details
About the LNB
The RGLN-U1A03N-A0 is a RevGo low noise block downconverter (LNB) operating in Ku-Band, with an input range of 10.95 - 11.70 GHz and an N-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Input Frequency | Ku-Band: 10.95 - 11.70 GHz |
| IF Connector | N-Connector |
| Switched type | No Switched (Single band) & By voltage (Dual-band) |
| Power & Output interface | N-type (50 Ohm) |
RF Specifications
| Input Frequency - LO: 10.00 GHz | 10.95-11.70 GHz |
| Output Frequency - Single-band | 950-1700 MHz |
| Noise Figure | 0.8 dB typ., 1.0 dB max. |
| LO Stability | +/- 3 ppm |
| LO Leakage Level - IF connector | -30 dBm max. |
| LO Leakage Level - RF connector | -60 dBm max. |
| Conversion Gain | 60 dB |
| Output P1dB | 5 dBm min. |
| Phase Noise | -60 dBc/Hz @100 Hz, -70 dBc/Hz @1 KHz, -80 dBc/Hz @10 KHz, -90 dBc/Hz @100 KHz |
| Output Spurious | -55 dBc @ -10 dBm (IF output) |
Power Supply
| Input Power | Via IFL |
| Single-band | 12-24 VDC |
| Dual-band | 12-24 VDC |
| *Switched by voltage | +13 VDC L-Band (12-15 VDC) +18 VDC H-Band (16-24 VDC) *Switched by 22 KHz (optional) |
| OFF | L-Band |
| ON | H-Band |
| Power Consumption | 3 W |
Interfaces
| Input Connector | WR75-G (Grooved) |
| Input VSWR | 2.5:1 |
| Output Connector | N-type female (optinal) |
| Output VSWR | 2.0:1 |
Physical Parameters
| Dimensions | inch 3.70x1.57*1.57 94x40x40 mm |
| Weight | lbs 0.53 g 240 |
| Operating Temperature | -40 to +60 °C |
| Humidity | 0-100 % (Condensing) |
| Altitude | 0-10,000 feet ASL |
| Water-proof Class | IP65 |
Related Products
