Zoom the image with the mouse
Nisshinbo
Nisshinbo NJT8371UNMKA Universal Ku-band 40W GaN BUC 13.75 - 14.5 GHz
Product Code:
NJT8371UNMKA
Condition:
New
Availability:
YES
Weight:
4.20 KGS
Width:
23.00
(cm)
Height:
10.00
(cm)
Depth:
15.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
About the BUC
The NJT8371UNMKA is a Nisshinbo block up converter (BUC) operating in Ku-Band, with an output range of 13.75 - 14.50 GHz and an N-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Output Frequency | Ku-Band: 13.75 - 14.50 GHz |
| IF Connector | N-Connector |
| AC Power Operating Option | Enclosed AC/DC PSU for BUC |
| M&C Option | FSK communication M&C Equipped |
Electrical Specifications
| Output RF Frequency Range | 13.75 to 14.5 GHz |
| Input IF Frequency Range | 950 to 1,700 MHz |
| Maximum IF Input Level (without damage) | +13 dBm max. |
| Conversion Type | Single, fixed L.O. |
| L.O. Frequency | 12.8 GHz |
| Frequency Sense | Positive |
| Saturation Output Power (Psat) | +46 dBm min. @ +25 °C +45 dBm min. over temperature |
| Linear Gain | 72 dB nom., 66 dB min. |
| Gain Variation over frequency @ fixed temperature | 5 dBp-p max. over 750 MHz 2 dBp-p max. over 54 MHz |
| Gain Stability over temperature | 4 dBp-p max. 2 dBp-p typ. |
| ACPR | -30 dBc typ., -26 dBc min. @ Pout = +44 dBm |
| Requirement for External Reference | Frequency: 10 MHz (sine-wave) Input Power: -5 to +5 dBm @ Input port Phase Noise: -125 dBc/Hz max. @ 100 Hz -135 dBc/Hz max. @ 1 kHz -140 dBc/Hz max. @ 10 kHz |
| L.O. Phase Noise | -60 dBc/Hz max. @ 100 Hz -70 dBc/Hz max. @ 1 kHz -80 dBc/Hz max. @ 10 kHz -90 dBc/Hz max. @ 100 kHz -100 dBc/Hz max. @ 1MHz |
| Spurious @ Pout = +44 dBm | In-band: -50 dBc max. @ RF Frequency Receive band: -70 dBm max. @ 10.95 to 12.75 GHz Out-of-band: -50 dBc max. |
| Receive Band Noise Density | Tx: 14.0 to 14.5 GHz -156 dBm/Hz max. @10.95 to 12.75 GHz Tx: 13.75 to 14.0 GHz -156 dBm/Hz max. @10.95 to 12.25 GHz -121 dBm/Hz max. @12.25 to 12.75 GHz |
| Noise Figure | 20 dB max. |
| Group Delay over any 54MHz | 2.5 nS p-p max. |
| Input Impedance | 50 ohms nom |
| Input V.S.W.R. | 2 : 1 max. |
| Output V.S.W.R. | 1.5 : 1 max. |
| Output Load V.S.W.R. for Non Damage | 2 : 1 max. |
| DC Power Requirement | Voltage Range: +48 VDC (+36 to +60 VDC) Power Consumption: 120 W typ. @ No IF signal 220 W typ. @ Pout=+44dBm 260 W typ., 290 W max. @ Psat |
| Mute | Shut off the HPA in case of L.O. unlocked, no 10 MHz reference signal, or Over temperature. |
| LED Indicator | GREEN: L.O. locked RED: L.O. unlocked (or no 10 MHz reference signal) |
| Monitor and Control | Interface: 650kHz FSK Signal on IF Connector Functions: Monitor: Tx Output Power / Temperature / Tx Status / Alarm (Over temperature / L.O. unlock) / Step Attenuator Control: Transmit On/Off / Step Attenuator Performance: Tx Output Power: Detector Range: 15 dB (up to Psat) Reading Accuracy: +/- 1.0 dB Step Attenuator: Attenuator Range: 0 to 31.5 dB Attenuator Step: 0.5 dB *Details are mentioned on Appendix of “Specifications Monitor & Control”. Functions: Monitor: Performance: Tx Output Power: |
Mechanical Specifications
| Input Interface | IF Connector: IF / Ref. / FSK M&C Signal Input: N-type female connector, 50 ohms Circular Connector: DC Input: MS Connector Part No.: PT02E-12-3P (025) Mating connector: PT06E-12-3S (470) Assignment: M&C Input: MS Connector * Part No.: PT02E-14-19P (025) Mating connector: PT06E-14-19S (470) Assignment: * This MS connector is available for only RS-232C Interface M&C models. |
| Output Interface | Waveguide, WR-75 (with Grooved) |
| Cooling | Forced-air-cooled |
| Dimension & Housing | 230(L) × 150(W) × 100(H) mm [9.07” (L) x 5.91” (W) x 3.94” (H)] without interface connectors and screws |
| Weight | 4.2 kg [9.3 lbs] |
Environmental Specifications
| Temperature Range (ambient) | Operating: -40 to +60 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % RH |
| Altitude | 15,000 feet (4,572 m) |
| Vibration | 5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.20 m/s2] (3 axis) |
| Waterproof / Dustproof (IP Code Rating) | IP 67 |
| Regulations | EU Directive (CE Marking) EMC (2014/30/EC) RoHS (2011/65/EU) Safety: EN60950-1 |
Power Supply Unit(PSU) - Electrical Specifications
| Input AC Voltage Range | Rated Range: 100 to 240 VAC Absolute Maximum Rating: 90 to 264 VAC |
| Input AC Frequency Range | 50/60 Hz |
| Input AC Current | 6 A max. @ 110V Input 3 A max. @ 230V Input |
| Output Voltage | +51 VDC +/- 3 V |
| Output Current | 9.8 A max.(output:+51Vdc, 500W Load) @110V/230V Input |
| Maximum Output Power | 500 W at 110V/230V Input |
| Efficiency | 85 % typ. @ 110V Input & 500W Load 88 % typ. @ 230V Input & 500W Load |
| Power Factor | 0.96 typ. @ 110V Input & 500W Load 0.93 typ. @ 230V Input & 500W Load |
Power Supply Unit(PSU) - Mechanical Specifications
| Input Interface | AC Input: AC Connector: GTS030-16-10P (025) Mating Connector: GTS06CF-16-10S (025) (Amphenol GT connector) Assignment: |
| Output Interface | DC & Option Output: MS Connector: PT02E-12-3P (025) Mating Connector: PT06E-12-3S (470) (Amphenol PT connector) Assignment: |
| Dimension & Housing | 250 (L) x 191 (W) x 118.1 (H) mm [9.84” (L) x 7.52” (W) x 4.65” (H)] without interface connectors and screws |
| Weight | 5.0 kg [11 lbs.] |
| Surface Finish | Protective & Conformal Coating: Trivalent Chromate Treatment Finish Paint: Polyurethane Paint, Ivory Color |
| Cooling | Forced-air-cooled |
Power Supply Unit(PSU) - Environmental Specifications
| Temperature Range (ambient) | Operating: -40 to +60 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % Rh |
| Altitude | 4,572 m [15,000 ft] |
| Vibration | 3.2 G [31.3 m/s2] (3 axis, 10 Hz to 1 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.2 m/s2] (3 axis) |
| Waterproof / Dustproof (IP Code Rating) | IP67 |
| Regulations | EU Directive (CE Marking) EMC - 2014/30/EU Low Voltage - 2014/35/EU RoHS - 2011/65/EU + (EU)2015/863 |
| Standard | IEC60950-1:2005+A1:2009+A2:2013 Safety: EN60950-1:2006+A11:2009+A1:2011+A12:2012+A2:2013 *Category and group : Overvoltage Category :II Pollution Degree :1 [EMC] Material Group :IIIab EN61000-3-2 (Harmonic Current Emission Test) EN61000-3-3 (Voltage Fluctuations and Flicker Test) EN61000-4-2 (ESD Test) EN61000-4-3 (Radio-Frequency Electromagnetic Field Test) EN61000-4-4 (Electrical Fast Transient/Burst Test) EN61000-4-5 (Surge Test) EN61000-4-6(Conducted Disturbance Radio-Frequency Test) EN61000-4-8 (Power Frequency Magnetic Field Test) EN61000-4-11 (Voltage Dips and Interruptions Test) EN55022-B (Disturbance Voltage Test) |
| MTBF (by Method of Parts Count as Design Condition Reliability Prediction) | 100,000 hours and more at +60 °C |
5 customers are viewing this product
Details
About the BUC
The NJT8371UNMKA is a Nisshinbo block up converter (BUC) operating in Ku-Band, with an output range of 13.75 - 14.50 GHz and an N-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Output Frequency | Ku-Band: 13.75 - 14.50 GHz |
| IF Connector | N-Connector |
| AC Power Operating Option | Enclosed AC/DC PSU for BUC |
| M&C Option | FSK communication M&C Equipped |
Electrical Specifications
| Output RF Frequency Range | 13.75 to 14.5 GHz |
| Input IF Frequency Range | 950 to 1,700 MHz |
| Maximum IF Input Level (without damage) | +13 dBm max. |
| Conversion Type | Single, fixed L.O. |
| L.O. Frequency | 12.8 GHz |
| Frequency Sense | Positive |
| Saturation Output Power (Psat) | +46 dBm min. @ +25 °C +45 dBm min. over temperature |
| Linear Gain | 72 dB nom., 66 dB min. |
| Gain Variation over frequency @ fixed temperature | 5 dBp-p max. over 750 MHz 2 dBp-p max. over 54 MHz |
| Gain Stability over temperature | 4 dBp-p max. 2 dBp-p typ. |
| ACPR | -30 dBc typ., -26 dBc min. @ Pout = +44 dBm |
| Requirement for External Reference | Frequency: 10 MHz (sine-wave) Input Power: -5 to +5 dBm @ Input port Phase Noise: -125 dBc/Hz max. @ 100 Hz -135 dBc/Hz max. @ 1 kHz -140 dBc/Hz max. @ 10 kHz |
| L.O. Phase Noise | -60 dBc/Hz max. @ 100 Hz -70 dBc/Hz max. @ 1 kHz -80 dBc/Hz max. @ 10 kHz -90 dBc/Hz max. @ 100 kHz -100 dBc/Hz max. @ 1MHz |
| Spurious @ Pout = +44 dBm | In-band: -50 dBc max. @ RF Frequency Receive band: -70 dBm max. @ 10.95 to 12.75 GHz Out-of-band: -50 dBc max. |
| Receive Band Noise Density | Tx: 14.0 to 14.5 GHz -156 dBm/Hz max. @10.95 to 12.75 GHz Tx: 13.75 to 14.0 GHz -156 dBm/Hz max. @10.95 to 12.25 GHz -121 dBm/Hz max. @12.25 to 12.75 GHz |
| Noise Figure | 20 dB max. |
| Group Delay over any 54MHz | 2.5 nS p-p max. |
| Input Impedance | 50 ohms nom |
| Input V.S.W.R. | 2 : 1 max. |
| Output V.S.W.R. | 1.5 : 1 max. |
| Output Load V.S.W.R. for Non Damage | 2 : 1 max. |
| DC Power Requirement | Voltage Range: +48 VDC (+36 to +60 VDC) Power Consumption: 120 W typ. @ No IF signal 220 W typ. @ Pout=+44dBm 260 W typ., 290 W max. @ Psat |
| Mute | Shut off the HPA in case of L.O. unlocked, no 10 MHz reference signal, or Over temperature. |
| LED Indicator | GREEN: L.O. locked RED: L.O. unlocked (or no 10 MHz reference signal) |
| Monitor and Control | Interface: 650kHz FSK Signal on IF Connector Functions: Monitor: Tx Output Power / Temperature / Tx Status / Alarm (Over temperature / L.O. unlock) / Step Attenuator Control: Transmit On/Off / Step Attenuator Performance: Tx Output Power: Detector Range: 15 dB (up to Psat) Reading Accuracy: +/- 1.0 dB Step Attenuator: Attenuator Range: 0 to 31.5 dB Attenuator Step: 0.5 dB *Details are mentioned on Appendix of “Specifications Monitor & Control”. Functions: Monitor: Performance: Tx Output Power: |
Mechanical Specifications
| Input Interface | IF Connector: IF / Ref. / FSK M&C Signal Input: N-type female connector, 50 ohms Circular Connector: DC Input: MS Connector Part No.: PT02E-12-3P (025) Mating connector: PT06E-12-3S (470) Assignment: M&C Input: MS Connector * Part No.: PT02E-14-19P (025) Mating connector: PT06E-14-19S (470) Assignment: * This MS connector is available for only RS-232C Interface M&C models. |
| Output Interface | Waveguide, WR-75 (with Grooved) |
| Cooling | Forced-air-cooled |
| Dimension & Housing | 230(L) × 150(W) × 100(H) mm [9.07” (L) x 5.91” (W) x 3.94” (H)] without interface connectors and screws |
| Weight | 4.2 kg [9.3 lbs] |
Environmental Specifications
| Temperature Range (ambient) | Operating: -40 to +60 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % RH |
| Altitude | 15,000 feet (4,572 m) |
| Vibration | 5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.20 m/s2] (3 axis) |
| Waterproof / Dustproof (IP Code Rating) | IP 67 |
| Regulations | EU Directive (CE Marking) EMC (2014/30/EC) RoHS (2011/65/EU) Safety: EN60950-1 |
Power Supply Unit(PSU) - Electrical Specifications
| Input AC Voltage Range | Rated Range: 100 to 240 VAC Absolute Maximum Rating: 90 to 264 VAC |
| Input AC Frequency Range | 50/60 Hz |
| Input AC Current | 6 A max. @ 110V Input 3 A max. @ 230V Input |
| Output Voltage | +51 VDC +/- 3 V |
| Output Current | 9.8 A max.(output:+51Vdc, 500W Load) @110V/230V Input |
| Maximum Output Power | 500 W at 110V/230V Input |
| Efficiency | 85 % typ. @ 110V Input & 500W Load 88 % typ. @ 230V Input & 500W Load |
| Power Factor | 0.96 typ. @ 110V Input & 500W Load 0.93 typ. @ 230V Input & 500W Load |
Power Supply Unit(PSU) - Mechanical Specifications
| Input Interface | AC Input: AC Connector: GTS030-16-10P (025) Mating Connector: GTS06CF-16-10S (025) (Amphenol GT connector) Assignment: |
| Output Interface | DC & Option Output: MS Connector: PT02E-12-3P (025) Mating Connector: PT06E-12-3S (470) (Amphenol PT connector) Assignment: |
| Dimension & Housing | 250 (L) x 191 (W) x 118.1 (H) mm [9.84” (L) x 7.52” (W) x 4.65” (H)] without interface connectors and screws |
| Weight | 5.0 kg [11 lbs.] |
| Surface Finish | Protective & Conformal Coating: Trivalent Chromate Treatment Finish Paint: Polyurethane Paint, Ivory Color |
| Cooling | Forced-air-cooled |
Power Supply Unit(PSU) - Environmental Specifications
| Temperature Range (ambient) | Operating: -40 to +60 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % Rh |
| Altitude | 4,572 m [15,000 ft] |
| Vibration | 3.2 G [31.3 m/s2] (3 axis, 10 Hz to 1 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.2 m/s2] (3 axis) |
| Waterproof / Dustproof (IP Code Rating) | IP67 |
| Regulations | EU Directive (CE Marking) EMC - 2014/30/EU Low Voltage - 2014/35/EU RoHS - 2011/65/EU + (EU)2015/863 |
| Standard | IEC60950-1:2005+A1:2009+A2:2013 Safety: EN60950-1:2006+A11:2009+A1:2011+A12:2012+A2:2013 *Category and group : Overvoltage Category :II Pollution Degree :1 [EMC] Material Group :IIIab EN61000-3-2 (Harmonic Current Emission Test) EN61000-3-3 (Voltage Fluctuations and Flicker Test) EN61000-4-2 (ESD Test) EN61000-4-3 (Radio-Frequency Electromagnetic Field Test) EN61000-4-4 (Electrical Fast Transient/Burst Test) EN61000-4-5 (Surge Test) EN61000-4-6(Conducted Disturbance Radio-Frequency Test) EN61000-4-8 (Power Frequency Magnetic Field Test) EN61000-4-11 (Voltage Dips and Interruptions Test) EN55022-B (Disturbance Voltage Test) |
| MTBF (by Method of Parts Count as Design Condition Reliability Prediction) | 100,000 hours and more at +60 °C |
Related Products
