Zoom the image with the mouse
Nisshinbo
Nisshinbo NJT8319FMA Standard Ku-band 16W mini-BUC 14.0 - 14.5 GHz
Product Code:
NJT8319FMA
Condition:
New
Availability:
YES
Weight:
2.40 KGS
Width:
18.00
(cm)
Height:
8.00
(cm)
Depth:
13.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.315.9545
About the BUC
The NJT8319FMA is a Nisshinbo block up converter (BUC) operating in Ku-Band, with an output range of 14.00 - 14.50 GHz and an F-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Output Frequency | Ku-Band: 14.00 - 14.50 GHz |
| IF Connector | F-Connector |
| AC Power Operating Option | Enclosed AC/DC PSU for BUC |
| DC Input Connector | MS Connector |
Electrical Specifications
| Output Frequency Range | 14.0 to 14.5 GHz |
| Input Frequency Range | 950 to 1,450 MHz |
| Maximum IF Input Level (without damage) | +13 dBm max. |
| Conversion Type | Single, fixed L.O. |
| L.O. Frequency | 13.05 GHz |
| Frequency Sense | Positive |
| Output Power @ 1dB G.C.P. (P1dB) | +42 dBm min. over temperature |
| Linear Gain | 68 dB nom., 62 dB min. |
| Gain Variation over frequency @ fixed temperature | 5dBp-p max. over 500 MHz 2 dBp-p max. over 54 MHz |
| Gain Stability over temperature | 4 dBp-p max. 2 dBp-p typ. |
| IM3 | -28 dBc typ., -24 dBc max. @ total power <= +42 dBm - 3 dB |
| ACPR | -28 dBc typ. @ Pout = +41 dBm |
| Requirement for External Reference | Frequency: 10 MHz (sine-wave) Input Power: -5 to +5 dBm @ Input port Phase Noise: -125 dBc/Hz max. @ 100 Hz -135 dBc/Hz max. @ 1 kHz -140 dBc/Hz max. @ 10 kHz |
| L.O. Phase Noise | -60 dBc/Hz max. @ 100 Hz -70 dBc/Hz max. @ 1 kHz -80 dBc/Hz max. @ 10 kHz -90 dBc/Hz max. @ 100 kHz -100 dBc/Hz max. @ 1MHz |
| Spurious @ P1dB Output | in band: -50 dBc max. @ RF Frequency in receive and: -70 dBm max. @ 10.95 to 12.75 GHz Out-of-band: -50 dBc max. |
| Receive Band Noise Density | Tx: 14.0 to 14.5GHz -156 dBm/Hz max. @10.95 to 12.75 GHz |
| Noise Figure | 20 dB max. |
| Group Delay over any 54MHz | 2.5 nS p-p max. |
| Input Impedance | 75 ohms nom. |
| Input V.S.W.R. | 2 : 1 max. |
| Output V.S.W.R. | 2 : 1 max. |
| Output Load VSWR for Non Damage | 2 : 1 max. |
| DC Power Requirement | Voltage Range: +48 VDC (+36 to +60 VDC) Power Consumption: 140 W typ. @ No IF signal 160 W typ., 180 W max. @ Pout = +42 dBm |
| Mute | Shut off the HPA in case of L.O. unlocked, no 10 MHz reference signal, or Over temperature. |
| LED Indicator | GREEN: L.O. locked RED: L.O. unlocked (or no 10 MHz reference signal) |
| Monitor and Control | <FSK Communication M&C> Interface: 650kHz FSK Signal on IF Connector Functions: Monitor: Tx Output Power / Temperature / Tx Status / Alarm (Over temperature / L.O. unlock) / Step Attenuator Control: Transmit On/Off / Step Attenuator Performance: Tx Output Power: Detector Range: 15 dB (up to P1dB) Reading Accuracy: +/- 1.0 dB Step Attenuator: Attenuator Range: 0 to 15.5 dB Attenuator Step: 0.5 dB *Details are mentioned on Appendix of “Specifications of Monitor & Control”. <RS-232C Interface M&C > Interface: RS-232C Interface on MS connector Functions: Monitor: Tx Output Power / Temperature / Tx Status / Alarm (Over temperature / L.O. unlock) / Step Attenuator Control: Transmit On/Off / Step Attenuator Performance: Tx Output Power: Detector Range: 15 dB (up to P1dB) Reading Accuracy: +/- 1.0 dB Step Attenuator: Attenuator Range: 0 to 15.5 dB Attenuator Step: 0.5 dB *Details are mentioned on Appendix of “Specifications of Monitor & Control”. until status of over temperature which turn Mute and Alarm will function at status of |
Mechanical Specifications
| Input Interface | IF Connector: N-type or F-type, female IF / Ref. / FSK M&C Signal (/ DC) Input DC Input: IF Connector or MS Connector - MS Connector - Part No.: PT02E-14-12P (025) Mating connector: PT06E-14-12S (470) Assignment: * Pin G: RS-232C TxD and Pin H : RS-232C RxD are available for only RS-232C Interface M&C models. |
| Output Interface | Waveguide, WR-75 (with Groove) |
| Cooling | Forced-air-cooled |
| Dimension & Housing | 180(L) × 130(W) × 80(H) mm [7.09” (L) x 5.12” (W) x 3.15” (H)] without interface connectors and screws |
| Weight | 2.4 kg [5.3 lbs] either MS Connector or IF Connector. If DC voltage is applied on both connectors, it may damage the unit or the unit may not operate properly. |
Environmental Specifications
| Temperature Range (ambient) | Operating: Operation Guarantee: -40 to +75 °C Performance Guarantee: -40 to +55 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % |
| Altitude | 15,000 feet (4,572 m) |
| Vibration | 5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.20 m/s2] (3 axis) |
| Waterproof / Dustproof (IP Code) | IP 67 |
| Regulations | EU Directive (CE Marking) EMC (2004/108/EC) |
AC Power Operating Option - Electrical Specifications
| Input AC Voltage Range | Rated Range: 100 to 240 VAC Absolute Maximum Rating: 90 to 264 VAC |
| Input AC Frequency Range | 50/60 Hz |
| Input AC Current | 3.6 A max. |
| Output Voltage | +48 VDC nom. |
| Output Current | 5.5 A max. |
| Efficiency | 90 % typ. |
| Maximum Output Power | 250W |
| Power Factor | 0.94 typ. output power arises. VAC as AC voltage input and 200 W as output power load. |
AC Power Operating Option - Mechanical Specifications
| Input Interface | AC Input: AC Connector: C016 20C003 200 12 Mating Connector: C016 20D003 210 12 (Amphenol eco|mate connector) Assignment: Option Port: MS Connector: PT02E-12-8P(025) Mating Connector: PT06E-12-8S(470) (Amphenol connector) Assignment: |
| Output Interface | DC & Option Output: MS Connector: PT02E-14-12S(025) Mating Connector: PT06E-14-12P(470) (Amphenol connector) Assignment: |
| Dimension & Housing | 186(L) x 133(W) x 60(H) mm [7.33” (L) x 5.24” (W) x 2.36” (H)] without interface connectors |
| Weight | 1.6 kg [3.5 lbs.] |
| Surface Finish | Protective & Conformal Coating: Trivalent Chromate Treatment Acrylic Paint, Ivory Color |
| Cooling | Convection air cooling |
AC Power Operating Option - Environmental Specifications
| Temperature Range (ambient) | Operating: -40 to +55 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % Rh |
| Dust/Waterproof | IP67 |
| Vibration | 5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.20 m/s2] (3 axis) |
| Regulations | EU Directive (CE Marking) EMC (2004/108/EC) Low Voltage (2006/95/EC) |
| Standard | [S afety] IEC60950-1:2005 (2nd Edition) EN60950-1:2006 [EMC] EN61000-3-2 (Harmonic Current Emission Test) EN61000-3-3 (Voltage Fluctuations and Flicker Test) EN61000-4-2 (ESD Test) EN61000-4-3 (Radio-Frequency Electromagnetic Field Test) EN61000-4-4 (Electrical Fast Transient/Burst Test) EN61000-4-5 (Surge Test) EN61000-4-6 (Conducted Disturbance Radio-Frequency Test) EN61000-4-8 (Power Frequency Magnetic Field Test) EN61000-4-11 (Voltage Dips and Interruptions Test) |
5 customers are viewing this product
Details
About the BUC
The NJT8319FMA is a Nisshinbo block up converter (BUC) operating in Ku-Band, with an output range of 14.00 - 14.50 GHz and an F-type IF interface. Full electrical, mechanical and environmental specifications are listed below.
Key Specifications
| Band | Ku-Band |
| Output Frequency | Ku-Band: 14.00 - 14.50 GHz |
| IF Connector | F-Connector |
| AC Power Operating Option | Enclosed AC/DC PSU for BUC |
| DC Input Connector | MS Connector |
Electrical Specifications
| Output Frequency Range | 14.0 to 14.5 GHz |
| Input Frequency Range | 950 to 1,450 MHz |
| Maximum IF Input Level (without damage) | +13 dBm max. |
| Conversion Type | Single, fixed L.O. |
| L.O. Frequency | 13.05 GHz |
| Frequency Sense | Positive |
| Output Power @ 1dB G.C.P. (P1dB) | +42 dBm min. over temperature |
| Linear Gain | 68 dB nom., 62 dB min. |
| Gain Variation over frequency @ fixed temperature | 5dBp-p max. over 500 MHz 2 dBp-p max. over 54 MHz |
| Gain Stability over temperature | 4 dBp-p max. 2 dBp-p typ. |
| IM3 | -28 dBc typ., -24 dBc max. @ total power <= +42 dBm - 3 dB |
| ACPR | -28 dBc typ. @ Pout = +41 dBm |
| Requirement for External Reference | Frequency: 10 MHz (sine-wave) Input Power: -5 to +5 dBm @ Input port Phase Noise: -125 dBc/Hz max. @ 100 Hz -135 dBc/Hz max. @ 1 kHz -140 dBc/Hz max. @ 10 kHz |
| L.O. Phase Noise | -60 dBc/Hz max. @ 100 Hz -70 dBc/Hz max. @ 1 kHz -80 dBc/Hz max. @ 10 kHz -90 dBc/Hz max. @ 100 kHz -100 dBc/Hz max. @ 1MHz |
| Spurious @ P1dB Output | in band: -50 dBc max. @ RF Frequency in receive and: -70 dBm max. @ 10.95 to 12.75 GHz Out-of-band: -50 dBc max. |
| Receive Band Noise Density | Tx: 14.0 to 14.5GHz -156 dBm/Hz max. @10.95 to 12.75 GHz |
| Noise Figure | 20 dB max. |
| Group Delay over any 54MHz | 2.5 nS p-p max. |
| Input Impedance | 75 ohms nom. |
| Input V.S.W.R. | 2 : 1 max. |
| Output V.S.W.R. | 2 : 1 max. |
| Output Load VSWR for Non Damage | 2 : 1 max. |
| DC Power Requirement | Voltage Range: +48 VDC (+36 to +60 VDC) Power Consumption: 140 W typ. @ No IF signal 160 W typ., 180 W max. @ Pout = +42 dBm |
| Mute | Shut off the HPA in case of L.O. unlocked, no 10 MHz reference signal, or Over temperature. |
| LED Indicator | GREEN: L.O. locked RED: L.O. unlocked (or no 10 MHz reference signal) |
| Monitor and Control | <FSK Communication M&C> Interface: 650kHz FSK Signal on IF Connector Functions: Monitor: Tx Output Power / Temperature / Tx Status / Alarm (Over temperature / L.O. unlock) / Step Attenuator Control: Transmit On/Off / Step Attenuator Performance: Tx Output Power: Detector Range: 15 dB (up to P1dB) Reading Accuracy: +/- 1.0 dB Step Attenuator: Attenuator Range: 0 to 15.5 dB Attenuator Step: 0.5 dB *Details are mentioned on Appendix of “Specifications of Monitor & Control”. <RS-232C Interface M&C > Interface: RS-232C Interface on MS connector Functions: Monitor: Tx Output Power / Temperature / Tx Status / Alarm (Over temperature / L.O. unlock) / Step Attenuator Control: Transmit On/Off / Step Attenuator Performance: Tx Output Power: Detector Range: 15 dB (up to P1dB) Reading Accuracy: +/- 1.0 dB Step Attenuator: Attenuator Range: 0 to 15.5 dB Attenuator Step: 0.5 dB *Details are mentioned on Appendix of “Specifications of Monitor & Control”. until status of over temperature which turn Mute and Alarm will function at status of |
Mechanical Specifications
| Input Interface | IF Connector: N-type or F-type, female IF / Ref. / FSK M&C Signal (/ DC) Input DC Input: IF Connector or MS Connector - MS Connector - Part No.: PT02E-14-12P (025) Mating connector: PT06E-14-12S (470) Assignment: * Pin G: RS-232C TxD and Pin H : RS-232C RxD are available for only RS-232C Interface M&C models. |
| Output Interface | Waveguide, WR-75 (with Groove) |
| Cooling | Forced-air-cooled |
| Dimension & Housing | 180(L) × 130(W) × 80(H) mm [7.09” (L) x 5.12” (W) x 3.15” (H)] without interface connectors and screws |
| Weight | 2.4 kg [5.3 lbs] either MS Connector or IF Connector. If DC voltage is applied on both connectors, it may damage the unit or the unit may not operate properly. |
Environmental Specifications
| Temperature Range (ambient) | Operating: Operation Guarantee: -40 to +75 °C Performance Guarantee: -40 to +55 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % |
| Altitude | 15,000 feet (4,572 m) |
| Vibration | 5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.20 m/s2] (3 axis) |
| Waterproof / Dustproof (IP Code) | IP 67 |
| Regulations | EU Directive (CE Marking) EMC (2004/108/EC) |
AC Power Operating Option - Electrical Specifications
| Input AC Voltage Range | Rated Range: 100 to 240 VAC Absolute Maximum Rating: 90 to 264 VAC |
| Input AC Frequency Range | 50/60 Hz |
| Input AC Current | 3.6 A max. |
| Output Voltage | +48 VDC nom. |
| Output Current | 5.5 A max. |
| Efficiency | 90 % typ. |
| Maximum Output Power | 250W |
| Power Factor | 0.94 typ. output power arises. VAC as AC voltage input and 200 W as output power load. |
AC Power Operating Option - Mechanical Specifications
| Input Interface | AC Input: AC Connector: C016 20C003 200 12 Mating Connector: C016 20D003 210 12 (Amphenol eco|mate connector) Assignment: Option Port: MS Connector: PT02E-12-8P(025) Mating Connector: PT06E-12-8S(470) (Amphenol connector) Assignment: |
| Output Interface | DC & Option Output: MS Connector: PT02E-14-12S(025) Mating Connector: PT06E-14-12P(470) (Amphenol connector) Assignment: |
| Dimension & Housing | 186(L) x 133(W) x 60(H) mm [7.33” (L) x 5.24” (W) x 2.36” (H)] without interface connectors |
| Weight | 1.6 kg [3.5 lbs.] |
| Surface Finish | Protective & Conformal Coating: Trivalent Chromate Treatment Acrylic Paint, Ivory Color |
| Cooling | Convection air cooling |
AC Power Operating Option - Environmental Specifications
| Temperature Range (ambient) | Operating: -40 to +55 °C Storage: -40 to +75 °C |
| Humidity | 0 to 100 % Rh |
| Dust/Waterproof | IP67 |
| Vibration | 5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz) 1 mm p-p (3 axis, 5 to 50 Hz) |
| Shock | 30 G [294.20 m/s2] (3 axis) |
| Regulations | EU Directive (CE Marking) EMC (2004/108/EC) Low Voltage (2006/95/EC) |
| Standard | [S afety] IEC60950-1:2005 (2nd Edition) EN60950-1:2006 [EMC] EN61000-3-2 (Harmonic Current Emission Test) EN61000-3-3 (Voltage Fluctuations and Flicker Test) EN61000-4-2 (ESD Test) EN61000-4-3 (Radio-Frequency Electromagnetic Field Test) EN61000-4-4 (Electrical Fast Transient/Burst Test) EN61000-4-5 (Surge Test) EN61000-4-6 (Conducted Disturbance Radio-Frequency Test) EN61000-4-8 (Power Frequency Magnetic Field Test) EN61000-4-11 (Voltage Dips and Interruptions Test) |
Related Products
