Kratos Indoor Dehydrator Kit 7581535

Kratos Indoor Dehydrator Kit 7581535

This automatic indoor dehydrator supplies low pressure dry air to protect the waveguide lines and feeds from moisture and condensation. The dehydrator air drying canisters use aluminum oxide desiccant for high efficiency. The humidity sensor signals for regeneration based upon current dew point rather than at fixed time intervals for additional energy savings and long desiccant life.
The automatic dehydrator is Ethernet network ready and can be configured and monitored using either built in SNMP support or the web interface.
Operational monitoring and alarms are software based making them highly configurable in the field and future software features can be installed while in service over the internet or local Ethernet network.
Legacy system support is provided via RS-422/485 or RS-232; Communicated operational information includes output pressure, duty cycle, temperature, compressor hours and air drying canister status.

P/N 7581535 BOM:
• One Indoor automatic dehydrator
• 250 FT of Black polyethylene tubing, 3/8” OD
• Two straight compression brass connectors 1/8”NPT to 3/8”OD
• One elbow compression brass connector 1/8”NPT to 3/8”OD
• One Teflon tape

Features
• Provides dry pressurized air to ensure signal quality of antenna waveguide and feeds and OMTs.
• Programmable operating pressure range: 0.10 - 7.50psig (7mbar - 517mbar).
• Remote monitoring and control with web interface or SNMP. Ethernet, RS-422/485, RS-232 and 3 programmable alarm relay outputs for compatibility with nearly any system
• Master/slave configuration
• Brushless compressor for long life
• Low energy use minimizes operational costs
• Quiet operation, exceptionally low noise and vibration levels
• Flexible installation options for rack mount or wall mount)