Zoom the image with the mouse
Intellian
Intellian VMT-7002 SMW Ka-band 3-band LNB
Product Code:
VMT-7002
Condition:
New
Weight:
0.38 KGS
Width:
6.80
(cm)
Height:
4.50
(cm)
Depth:
1.30
(cm)
$3,107.69
Features
• Alarm and M&C as option
• Auto switching LO ref: Internal / Ext. 10 MHz
• Low phase noise
• High P1dB and IP3
• Wide operating temperature range
• Customizable switching, Voltage/Tone
| TECHNICAL SPECIFICATIONS | |
| MODEL: | Ka-Band Multiband |
| Input Frequency | 3 to 8 bands, custom between 17.30 to 22.30 GHz, overlap possible |
| LO Frequency | Custom between 16.25 to 20.75 GHz |
| Output Frequency | 950-1950 MHz or 1000-2000 MHz, (950-2250 MHz optional) |
| Band switching | +11 to 26 V nom. & 22 kHz, TTL or 0/12V as option via sep. SMA, (example 13/15/18/24 V & 22 kHz tone for 8 Bands) |
| 22 kHz tone Switching | Switching No tone/22 kHz ±4 kHz, Amplitude voltage 0.6 ±0.2 V, Duty cycle 40-60% |
| Gain | 55 dB min. standard |
| Flatness each band | ±2 dB max. |
| Noise figure | 1.3 dB to 1.7 dB typ., increases with input frequency |
| Phase Noise | -35 dBc @ 10 Hz -65 dBc @ 100 Hz -80 dBc @ 1 kHz -85 dBc @ 10 kHz -95 dBc @ 100 kHz -112 dBc @ >1 MHz typ. |
| Image Rejection | 45 dB @ LO 16.25, 20 dB @ LO 20.25 |
| Input | Flange PBR220, waveguide WR42 |
| Input VSWR | 1.35:1 max. with Low Loss Isolator (included) |
| Output P1dB | +15 dBm min. |
| Output IP3 | +25 dBm min. |
| Output VSWR | 1.7:1 typ. |
| Output Connector | N-type 50Ω standard, Option: SMA-type 50Ω or F-type 75Ω |
| LO reference | Auto switch External/Internal |
| Internal LO ref. | ±2.5 ppm -40 to +60°C (±3.5 ppm -40 to +80°C) |
| External 10 MHz Ref. | Sine Wave, Sine wave, Level -10 to +10 dBm. Supplied through output connector. |
| LO Leakage | -60 dBm max. |
| DC Input | +11 to +26 V through output connector or separate SMA connector (optional) |
| Power consumption | 5W max. |
| Dimensions | 153 x 68 x 45 mm, including isolator |
| Weight | 375 g (SMA-connector) including isolator |
| Temperature range | Storage and operating: - 40° to + 80° C |
| Alarm option | Interface: Separate M8-connector (B), Open collector, Open on fault, 3.3 to 24 V, max. 200 mA Available Alarms: LO not locked, Total current consumption, Power detector outside limits, RF level outside limits |
| M&C option | Via MODBUS RTU RS485 electrical interface, see sep. document for details. NOTE! Mates with M8 male connector. Cable: shielded min. CAT 5 |
| Other options | Customized LO frequencies (up to 8 LOs), Separate DC (SMA), Separate 10 MHz ref. input (SMA), Customized gain, Extended IF |
| Miscellaneous | Enclosed O-ring, mounting screws (M3 x 8) 4 pcs |
5 customers are viewing this product
Details
Features
• Alarm and M&C as option
• Auto switching LO ref: Internal / Ext. 10 MHz
• Low phase noise
• High P1dB and IP3
• Wide operating temperature range
• Customizable switching, Voltage/Tone
| TECHNICAL SPECIFICATIONS | |
| MODEL: | Ka-Band Multiband |
| Input Frequency | 3 to 8 bands, custom between 17.30 to 22.30 GHz, overlap possible |
| LO Frequency | Custom between 16.25 to 20.75 GHz |
| Output Frequency | 950-1950 MHz or 1000-2000 MHz, (950-2250 MHz optional) |
| Band switching | +11 to 26 V nom. & 22 kHz, TTL or 0/12V as option via sep. SMA, (example 13/15/18/24 V & 22 kHz tone for 8 Bands) |
| 22 kHz tone Switching | Switching No tone/22 kHz ±4 kHz, Amplitude voltage 0.6 ±0.2 V, Duty cycle 40-60% |
| Gain | 55 dB min. standard |
| Flatness each band | ±2 dB max. |
| Noise figure | 1.3 dB to 1.7 dB typ., increases with input frequency |
| Phase Noise | -35 dBc @ 10 Hz -65 dBc @ 100 Hz -80 dBc @ 1 kHz -85 dBc @ 10 kHz -95 dBc @ 100 kHz -112 dBc @ >1 MHz typ. |
| Image Rejection | 45 dB @ LO 16.25, 20 dB @ LO 20.25 |
| Input | Flange PBR220, waveguide WR42 |
| Input VSWR | 1.35:1 max. with Low Loss Isolator (included) |
| Output P1dB | +15 dBm min. |
| Output IP3 | +25 dBm min. |
| Output VSWR | 1.7:1 typ. |
| Output Connector | N-type 50Ω standard, Option: SMA-type 50Ω or F-type 75Ω |
| LO reference | Auto switch External/Internal |
| Internal LO ref. | ±2.5 ppm -40 to +60°C (±3.5 ppm -40 to +80°C) |
| External 10 MHz Ref. | Sine Wave, Sine wave, Level -10 to +10 dBm. Supplied through output connector. |
| LO Leakage | -60 dBm max. |
| DC Input | +11 to +26 V through output connector or separate SMA connector (optional) |
| Power consumption | 5W max. |
| Dimensions | 153 x 68 x 45 mm, including isolator |
| Weight | 375 g (SMA-connector) including isolator |
| Temperature range | Storage and operating: - 40° to + 80° C |
| Alarm option | Interface: Separate M8-connector (B), Open collector, Open on fault, 3.3 to 24 V, max. 200 mA Available Alarms: LO not locked, Total current consumption, Power detector outside limits, RF level outside limits |
| M&C option | Via MODBUS RTU RS485 electrical interface, see sep. document for details. NOTE! Mates with M8 male connector. Cable: shielded min. CAT 5 |
| Other options | Customized LO frequencies (up to 8 LOs), Separate DC (SMA), Separate 10 MHz ref. input (SMA), Customized gain, Extended IF |
| Miscellaneous | Enclosed O-ring, mounting screws (M3 x 8) 4 pcs |
Download
| Download Name | |
| Intellian VMT-7002 Datasheet | |
Related Products
